Up gradation/Creation of infrastructure by way of Macdamization , Electrical infrastructure , Access control and Security Infrastructure at I/E Duderhama Ganderbal(devri stone gate)

Earth work in excavation by mechanical means(hydraulic excavator)in trenchesforfoundations,drains,pipes,cablesetc.(notexceeding1.5min width)andforshafts,wells,cesspitsandthelikenotexceeding10sqmon plan,includingdressingofsidesandrammingofbottomsliftupto1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2 x 6’0’’x 6’0’’x 6’0’’ = 432.00 CFT OR 12.23 CUM

Providing and laying stones olingtightly handpacked under foundations, footings, floors etc .including carriages of materials from source to site of work complete in all respects. 2 x 6’0’’x 6’0’’x 0’4’’ =23.76 CFT OR 0.67 CUM

Providing& layin gin position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level. (1:4:8(1cement:4coarsesand:8gradedstoneagg/40mmnominalsize) crushed aggregate) 2 x 6’0’’x 6’0’’x 0’4’’ =23.76 CFT OR 0.67 CUM

Providing and laying in position reinforced cement concrete M-20grade 1:1.5:3 mix, using cement content asper approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including curing, improve workability without impairing strength and durability as per direction of Engineer-incharge. .

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. .(Al lwork at all levels complete.)

Providing form work including Centering ,shuttering , strutting, propping etc. using plywood sheeting with water proofing ply board and removal of the same for ( All works at all levels complete.).- a) Foundations ,footings, bases of columns etc .form as sconcrete.

b) Columns,etc

Deveri Stone work in superstructure upto floor five level in cement mortar1:3(1cement:3coarsesand)including centering, shuttering and pointing with cement mortar1:2(1whitecement:2stonedust)withan admixture of pigment matching the stones hadeand curing complete

Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ( For Steel Gate(Ornamental)asper the approved design by consultant/Engineer Incharge including cost of necessary hold fasts and moving wheels ,rails as required all complete as per the directions of consultant/SiteEngineer.)

ProvidingRetro-reflectiveregulatorysignboardofsize900mmdiameter madeoutof2mmthickaluminumsheet,facetobefullycoveredwithhigh intensityencapsulatedlenstyperetro-reflectivesheetingasapprovedby Engineer-in-charge.Letter,symbols,borders,etc.willbeasperIRC:67 with required colour schemeon theboardsand with thehigh intensity grade A.the aluminum sheet oberiveted to M.S. frame of angle iron of size40x40x4mm.Theboardswillbefixedto1No.50x50mmsquarepost made of M.S. angle50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement .Sheet work tobe painted with twoor more coat so f synthetic enamel pain to veran under coat(primer)and back side of aluminum sheet tobe painted with two or more coats of epoxy paint including appropriate priming coat completein all respects as per directions of Engineer-in-charge.