REPAIR TO CERTAIN BR WORKS AND PETTY WORK IN CERTAIN BLDGS AND PERIODICAL SERVICES TO MD OTM ACCN AT ALMORA UNDER GE RANIKHET

Amount

Attending day to day complaints related to joinery work such as repair to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs fitting and fixing wire mesh, glass, repair of aluminum shutters etc as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at every evening at 0500pm on daily basis after satisfactory complition,complete all as specified and directed. Material such as nails,screws, washers, putty/beading for glass, nut & bolts shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 125.00/ complaint shall be recovered against non attending of every complaints. (v) Material will be measured (after fixing) and paid separatly as supply only under respective items.

Supply only for 6mm thick plywood, graded BWR, type BB fixed to timber framework of any thickness complete all as specified and directed.

Supply only Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed.

Supply only 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.

Supply only 4mm thick figured glass pin headed type in square n exc 0.50 Sqm, in square or reqd shape of each pane including oil putty complete all as specified and directed.

Supply only 150mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

Supply only 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

Supply only 150mm long mild steel pressed handle, oval type stove enamelled black complete all as specified and directed.

Supply only 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Attending day to day complaints related to water supply only & plumbing work such as leakage of bib cock,/pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal and replacement of rubber washer in PVC siphons and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900am and report to complaint cell at same day at 0500pm on daily basis after satisfactory complition, complete all as specified and directed. Material such as threads, washers, lead etc shall be included in the quoted rate. Note :- (i) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900am by rep of contractor on daily basis. (ii) Every docket will submitted at complaint cell on daily basis of same day at 0500 pm or early morning on next day after satisfacotry complition. (iii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iv) Rs. 125.00/complaint shall be recovered against non attending of every complaints. (v) Material will be measured (after fixing) and paid separatly as supply only under respective items.

Supply only 15 mm bore CP bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only 'flushing cistern kit' for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed.

Supply only 15 mm bore bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only 15 mm bore stop valves/ angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 20 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 15 mm bore Stop valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply only 15 mm Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply only 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only 40mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only Grating doom 125mm dia of PTMT (minimum wt 40grms) complete all as specified and directed.

Supply only 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed (Minimum weight 90gms) complete all as specified and directed.

Supply only water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.

Supply only PVC seat cover for EWC of white colour complete all as specified and directed.

Supply only Jet, chromium plated, screwed down high pressure with or without lettered Hot or Cold with lenght not less than 1.0mtr long , fixed for flange with WC complete all as specified and directed.

Supply only 15mm bore steel water tubing medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.

Supply only 20mm bore steel water tubing medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, solvent and etc complete all as specified and directed.

Supply only 15mm size PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

Supply only 15mm size PVC connection with PTMT nuts of length 600mm complete all as specified and directed.

Supply only 15mm bore size GI nipple, and socket complete all as specified and directed.

Supply only 20mm bore size GI nipple and socket complete all as specified and directed.

Supply only 15mm bore size GI elbow, and Tee complete all as specified and directed.

Supply only 20mm bore size GI elbow, and Tee complete all as specified and directed.

Supply only 20mm bore size socket reducer, and tank connection complete all as specified and directed.

Supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F 15 mm bore dia ball brass valve high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20 mm bore dia ball brass valve high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 500 ltr capacity rotational mounded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling unserviceable PVC/ cement water storage tank of 500 Ltr capacity complete all as specified and directed.

S&F 1000 ltr capacity rotational mounded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling unserviceable PVC/ cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

Attending day to day complaints pertaining to different type of repair of steel windows, handles, door springs, frame, rolling shutter garrages, repair by welding etc (run or spot welding as per site requirement) on all working day to attend the complaint cell by rep of contractor at 0900am along with welding machine, gloves, welding glass, welding rod etc any other tools required and report to complaint cell at same day at 0500pm on daily basis after satisfactory complition, , as per time to time requirement complete all as specified and directed. Note :- (i) The above task shall be carried out by deploying Minimum 01 No Welder and 01 No of helper on daily basis. (ii) Necessary T&P, equipment and safety gear shall be provided by the contractors. (iii) Contractor or his auth rep shall sign the Attendance register and Demand register daily. (iv) Rs. 125.00/day shall be recovered for non deployment of labour as per demand register. (v) Material will be measured (after fixing) and paid separtely as supply only under respective items.

Supply only 100 mm long MS butt hings medium weight cold rolled complete all as specified and directed.

Supply only 75 mm long MS butt hings medium weight cold rolled complete all as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding 1 : 2 : 4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.

S&F in repair 15 mm bore fancy type chromium plated central hole wash basin Mixer without popup waste system with 450mm long braided hoses, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore fancy type chromium plated wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, screwed down high pressure with or without lettered hot and cold screwed for iron pipe complete all as specified and directed.

S&F in repair 28mm dia fancy type drapery rod of mild steel duly powder coated wood finished with fixing bracket and fancy type finale, stops etc complete all as specified and directed

S&F in repair stainless steel chromium plated soap dish of standard size complete all as specified and directed

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respects as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D; type, 60 cm long between flanges complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm swivel type complete all as specified and directed

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and directed.

S&F in repair stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 0.50mm and weight not less than 7.50 kg of approved design/ pattern as approved with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall complete all as specified and directed.

S&F in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair vitreous china coloured european type WC (single piece) including connection to drain,'S' trap and fixing bolts, plastic water closet seat cover complete all as specified and directed.

Dismantling laid bedded and pointed stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for 18 to 20mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of brick work of stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement includig mixing of water proofing compound of approved complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces with CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound disterper complete all as specified and directed.

M&L for preparation of new plstered surfaces of walls and applying two coats of cement base paint complete all as specified and directed

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets etc complete all as specified and directed.

S&F powder coated GI everest ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the main tee 28x24x3mm thick, cross tee 28x24x3mm thick and wall angle 24x24x3mm thick sections complete all as specified and directed.

S&F 4 mm thick everest designer ceiling (E-board classic) board/ tiles for insulation and accoustic purpose, 595 X 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying two coats of oil bond distemper over a coat of primer complete all as specified and directed.

M&L in repair 18/19 mm thick perlaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cupboards/ kitchen cupboard with teak beading of all sides fixed complete all as specified and directed.

S&F in repair 6mm thick decorative PVC sheet hollow/ solid for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as required, including with panelling to vertical surfaces, fixed with rawl plugs and screws complete all as specified and directed.

S&F in repair parquet flooring 8.3mm thick, hard board plank both side laminated with decorative surface laid above with and including thermoplastic sheet complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. complete all as specified and directed.

S&F 0.63 mm thick plain galvanised mild sheet, as in ridges, hips, valley gutter, drip, straight flashing etc., fxed in any pattern complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each.& removing to or from store all as specifed & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each. removing to or from store all as specifed & directed.

Taking down shutters ( per leaf ) of any description exceeding 1.00 sqm each but not exceeding 2 Sqm each complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F factory made shutters 2nd class HW rail and style 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treat complete all as specified and directed.

S&F 30 mm thick glazed and skeleton shutters using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(b); supplied and fitted in chowkats complete all as specified and directed.

S&F fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and complete all as specified and directed.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and complete all as specified and directed.

S&F 100 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed

S&F 150 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed

S&F 75 mm size mild steel butt hinges, medium weight and fixed complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight and fixed complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Dismantling of boarding, any description fixed in any position like wall, wooden flooring and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.

S&F in repair to existing floors in patches, including cutting out, piecing, heading joints etc, softwood sccond class 30mm thick wooden boarding in floors planed one side, with butt joints and fixed with screws incl necessary support whereever necessary complete all as specified and as directed.

S&F 2nd class hardwood 25 mm boarding plain one side with butt joint fixed with screws in any situation complete all as specified and directed.

S&F 2nd class hardwood 40 mm boarding plain one side with butt joint fixed with screws in any situation complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as sub floor or sub base or similar work including necessary form work complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base complete all as specified and directed.

M&L for screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L for chequered cement concrete tiles of size 300 x 300 x 25mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surface of tiles as fllor/ steps/ path complete all as specified and directed.

M&L for sand filling under floors, interlocking tiles or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping/ kerbing/ side of interlocking/ flooring/ hardstanding etc. including weathering and throating including necessary form work etc. complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L complete removal of existing treatment on old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling including cornices etc by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots applying one coat of white wash complete all as specified and directed.

M&L for washing, rubbing down and stopping of old distempered surface of walls and applying one coat of distemper oil emulsion white or tined complete all as specified and directed.

M&L complete removal of existing treatment on old distempered surfaces of walls and applying two coats of distemper oil emulsion white or tined complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying each subsequent coat of synthetic enamel paint on wood and wood based surfaces of any description over 10 cm width or girth complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces by knotting, stopping etc of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of CGI/ PGI sheet roof of any description not otherwise described over 10 cm width or girth by straightening, cleaning, removing rust and washing cleaning etc to receive painting and making good with red lead putty whenever required and applying one coat of synthetic enamel paint as roof paint complete all as specified and directed.

M&L for applying each subsequent coat of synthetic enamel paint as roof paint on steel and iron surfaces of CGI/ PGI sheet roof of any description not otherwise described over 10 cm complete all as specified and directed.

M&L for preparation of old decorated surface and applying one coat of exterior emulsion paint on chequred concrete tiles or interlocking tiles (old painted) complete all as specified and directed.

M&L for french polishing two or more coats on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work till to obtain the mirror finish look of the surface complete all as specified and directed.

M&L for tucking on old plastered wall surface and applying a thick layer of 2mm thick (Average thickness) Plaster of Paris (POP) complete all as specified and directed.

M&L for synthetic enamel paint two coats over a coat of primer including preparation of old plastered /unplastered wall surface (any type) of size 60cm*40cm and writing the following details with two coats of synthetic enamel paint :- Bldg No----------Vintage ----------- Last periodical carried on -------------- Last Special Repair carried on----------------- Addn/Altn last carried on----------

M&L for writing letters or figures (block, roman, italic, or indian) not exc 30cm high complete all as specified and directed.

M/s JS Constructions

Shri Varada Enterprises

SS Construction Co