Construction of Community Sanitary Complex at Government Tribal Welfare PM College Hostel for Boys in Chodavaram Mandal of Anakapalli District - (6 No of Units) Estimate cost of Rs.18.00 Lakhs

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring, strutting, sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for finished iem of work for foundation of building.

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including Cost and conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc., hire charges of T & P etc., complete for finished item of work.

Vibrated Cement Concrete (1:4:8) M 7.5 Grade using 40mm HBG Metal (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental and labour charges such as mixing, laying, curing concrete for 21 days etc., complete for finished item of work.

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Footings

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Plinth beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Columns

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof slab 125mm thick

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work in all floors

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Basement alround

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Super structure

Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work for ceiling

Providing Acco proof Plastering with CM (1:3) 12mm thick over RCC roof slab (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials like cement, sand, water proofing compound, water etc., to site, on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing Dadooing to toilet walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand , water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Cost supply and fixing of Door with steel sheet as pet IS standards framed with mild steel flat of 20mm width 5mm thick alround the attached to 25mm angular and centre and necessary accessories and all labour charges etc., complete

Whaite washing to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete for finished item of work.

Painting to new walls with 2 coats of white cement paint over prime coat of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls

Painting to MS steel sheets for door with new work Anti corrosive bitumen paint grade 1 Indocem or equivalent on red oxide paint single coat over a primery coat including codt and conveyance of all materials and labour charges etc., complete

Supplying & Delivery of Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long BMW-D.01 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supplying & Delivery of Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock BMW-D.26

Cost, supply and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G.13 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

110mm dia - Double Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 28.60mm OD Pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 22.20mm OD Pipe

Provision for taps S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 223 183 BMW-E.10 b) list of approved Brands/ Manufacturers/ Suppliers) including labour charges as per SSR BMW-E.09

Supplying and Fixing of 25mm dia 2.0 mm thick PVC Conduit pipe concealed in wall with all required accessories including chiselling the wall whereever necessaty including masonary work for Light,fan and separate plug point with T.W.Deep box including all labour charges etc. Ele-1.2.1 (B)

Supply of 1.50 Sqmm ISI marked FRLS/FRLS-H/ HFFR/ ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply of 9W Pin type CFL Lamp.Makes: Wipro / G.E. / Phillips / Crompton / Bajaj / Havells / Surya / HPL / Halonix. ELEC-3.7.4 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply of not less than 1100mm length, Box type powder coated tube light luminaire with necessary wiring suitable for fixing 2 Nos retrofit T8 LED tubes but without tube and choke. including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete. Makes: As per list of recommended., complete.

Supply of 200mmX250mmX75mm size (length x width x depth) 18 SWG sheet steel boxes duly finished with two coats zinc chromate red oxide paint and enamel paint of matching colour to wall including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

FLUSH TYPE SWITCHES - 6A, 1 Way flush type Switch including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring, strutting, sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for finished iem of work for foundation of building.

Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including Cost and conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc., hire charges of T & P etc., complete for finished item of work.

Vibrated Cement Concrete (1:4:8) M 7.5 Grade using 40mm HBG Metal (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental and labour charges such as mixing, laying, curing concrete for 21 days etc., complete for finished item of work.

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Footings

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Plinth beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Columns

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof slab 125mm thick

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work in all floors

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Basement alround

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Super structure

Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work for ceiling

Providing Acco proof Plastering with CM (1:3) 12mm thick over RCC roof slab (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials like cement, sand, water proofing compound, water etc., to site, on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing Dadooing to toilet walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand , water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Cost supply and fixing of Door with steel sheet as pet IS standards framed with mild steel flat of 20mm width 5mm thick alround the attached to 25mm angular and centre and necessary accessories and all labour charges etc., complete

Whaite washing to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc, complete for finished item of work.

Painting to new walls with 2 coats of white cement paint over prime coat of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls

Painting to MS steel sheets for door with new work Anti corrosive bitumen paint grade 1 Indocem or equivalent on red oxide paint single coat over a primery coat including codt and conveyance of all materials and labour charges etc., complete

Supplying & Delivery of Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long BMW-D.01 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supplying & Delivery of Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock BMW-D.26

Cost, supply and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G.13 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

110mm dia - Double Tee - UPVC/SWR Pipe fittings including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 28.60mm OD Pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 22.20mm OD Pipe

Provision for taps S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 223 183 BMW-E.10 b) list of approved Brands/ Manufacturers/ Suppliers) including labour charges as per SSR BMW-E.09

Supplying and Fixing of 25mm dia 2.0 mm thick PVC Conduit pipe concealed in wall with all required accessories including chiselling the wall whereever necessaty including masonary work for Light,fan and separate plug point with T.W.Deep box including all labour charges etc. Ele-1.2.1 (B)

Supply of 1.50 Sqmm ISI marked FRLS/FRLS-H/ HFFR/ ZHFR PVC insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply of 9W Pin type CFL Lamp.Makes: Wipro / G.E. / Phillips / Crompton / Bajaj / Havells / Surya / HPL / Halonix. ELEC-3.7.4 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supply of not less than 1100mm length, Box type powder coated tube light luminaire with necessary wiring suitable for fixing 2 Nos retrofit T8 LED tubes but without tube and choke. including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete. Makes: As per list of recommended., complete.

Supply of 200mmX250mmX75mm size (length x width x depth) 18 SWG sheet steel boxes duly finished with two coats zinc chromate red oxide paint and enamel paint of matching colour to wall including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

FLUSH TYPE SWITCHES - 6A, 1 Way flush type Switch including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.