REPLACEMENT / RENEWAL OF CERTAIN BER FURNITURE ETC AT ARMY AREA BANAR UNDER GE BANAR

Almirah Large steel (FD/E6/MAP/18) The overall size shall be of 1900mm x 910 mm x 490mm made of MS sheet. The body, legs & shelves shall be made of 1mm thick MS sheet . Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. . 04 Nos adjustable shoe shall be provided to each leg . All steel surfaces ext/internal shall be powder coated with two coats of synthetic enamel paint of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC . All joints (gaps) shall be filled with putty/primer before painting complete all as specified and directed by Engineer-in-Charge.

Almirah med steel (FD-1032) The overall size shall be of 1270mm x 765 mm x 440mm made of MS sheet. The body, legs & shelves shall be made of 1mm thick MS sheet. Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. 04 Nos adjustable shoe shall be provided to each leg . All steel surfaces ext/internal shall be powder coated of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for powder coating and colour shall be approved by GE/EIC . All joints (gaps) shall be filled with putty/primer before powder coating complete all as specified and directed by Engineer-in-Charge.

Almirah Mess Utencil (D-93M) Top / Sides / Shutters / bottom / partition shall be made of 18 mm thick prelaminated MDF board colour/shade shall be approved by EIC/GE. Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per sample kept at BSO yard. 12mm thick plywood BWR grade shall be provided on back side .Teak wood Legs frame of size 75mm X 30mm thick shall be made all around the bottom of almirah mess utencil with 02 Nos stiffener (25 x 25mm) complete as directed by Engr-in-Charge. PVC/metal corner shall be used in fabrication body/structure of item. 4 mm thick teak wood beading shall be used to exposed surfaces parts as directed by Engr-in-Charge or as shown on drg .All wooden surfaces / wood based materials shall be french polished with high class finish complete all as specified and directed by Engineer-in-Charge.

Bed Hard Steel (FD/E6/MAP/08(R)) The complete frame work shall be made of MS square section with 18 guage thickness . Bed top shall be 12mm thick BWR grade plywood and shall be fitted with sunken nuts/bolts and washer as directed by EIC. The foot board / head board shall be covered with 18mm thick prelamintated MDF board ext grade with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . Bottom framing work of foot rest shall be of 18 mm MS square section with 18 Guage thick shall be used. Inner hard rubber shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge.

Chair dinning officers (FD/MAP-II/04) Timber shall be first class teakwood , seasoned free from knots & cracks . Seat shall be made from 75mm PU foam with 40 density pasted with adhesive on 12mm thick BWR plywood covered with fabric/tapestry. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC.PVC rings shall be screwed to each legs. All wooden portion shall be smoothened to apply best quality french polish glossy finish complete all as specified and directed by Engineer-in-Charge.

Chair easy (FD-229) Timber shall be first class teakwood , seasoned free from knots & cracks . canning of seat and back shall be done as per Godrej pattern with 2 mm wide half round and border with 4 mm wide half round first quality cane. PVC rings shall be screwed to each legs. All wooden portion shall be smoothened to apply best quality french polish glossy finish complete all as specified and directed by Engineer-in-Charge.

Chair Computer (FD/MAP/E6/01) The overall size of chairs shall be of 1050 mmx500mmx550mm . 12 mm thick hot pressed plywood shall be used in seat and back.Arm rest shall be made of PU. Seat and back shall be made of PU foam 60 mm thick with 40 density and fabric not less than Rs 350 per meter. Base shall be nylon ,synchrotilt machanism ,PVC beading on seat and back .Rest all as per existing trade pattern or sample held with BSO yard complete all as specified and directed by Engineer-in-Charge.

Chair Verandah (FD-256) The complete frame work shall be made of 19 mm MS round tube with 16 guage thick as per IS-4923. Chair verandah shall be weaved of with white PVC cane 1st quality 4 mm wide and half round thick as per matt pattern in place of Nylon Newar . Canning work shall be approved by EIC.Complete steel frame work shall be of white powder coated . Inner PVC shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge.

Chair writing (FD/E6/MAP/12 ) The overall size of chairs shall be of 820mm Hx450mm Wx450mm D . 12 mm thick hot pressed plywood shall be used in seat and back.arm rest shall be made of PU. Seat and back shall be made of PU foam 50 mm thick with 50 density and fabric not less than Rs 350 per meter. ABS in seat and back shall be provided.frame shall be made of 25 mm MS Round pipe 14 guage thick with black powder coated . Sample of chairs shall be approved by EIC/GE before supply or as per sample held with BSO Yard complete all as specified and directed by Engineer-in-Charge.

Charpoy IP plytop (FD/E6/MAP/01) The complete frame work shall be made of MS box section with 16 guage thick as per IS-4923.12mm thick BWR grade plywood shall be fitted on top with shunken nuts/bolts and washer as directed by EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . hard rubber shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge.