Construction of 120 Nos. Girls MBBS Hostel building at Dr.RPGMC Kangra at Tanda in Distt. Kangra, HP (SH - Providing E.I. therein)

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group A. Makes:- Switches:-Legrand (Myrus), L&T (Oris), Anchor Roma (Plus)

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2-way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group A. Makes:- Switches:-Legrand (Myrus), L&T (Oris), Anchor Roma (Plus)

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:- KEI/Anchor

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

2x6.0 Sq. mm.

2x16 Sq. mm.

Makes:- KEI/Anchor

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:-KEI/Anchor

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Makes:-KEI/Anchor

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

Makes:-KEI/Anchor

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm dia

Make:- Diplast/BEC/Finolex

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

TV. Socket outlet, modular.

Makes:- L&T (Attero)/ Legrand / Schneider

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Makes:- Legrand (Myrus), L&T (Oris), Anchor Roma (Plus)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Makes:- Legrand (Myrus), L&T (Oris), Anchor Roma (Plus)

Supplying and erection Main panel (confirming to IEC code - 61439) following depth sheet metal cubical pedestal of dimensions 2100mm (high) x 1650mm (wide) x 450mm (deep), made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with 11 Nos. compartments to hose 630 Amps TP&N MCCB 1 No. (incoming), 315/400 Amps. TP&N MCCB 1 No. (outgoing), 250 Amps TP&N MCCB 1 No. (outgoing), 100 Amps TP&N MCCB 4 Nos.(outgoing) 1 No. meter module, 1 No. main busbar 800 amp. & 2 Nos. for cable alley. The Main panel is complete with copper busbar strips 800 Amps., 400 Amp., 300 Amp & copper busbar strip100 Amp.and meter module, Voltmeter, Ammeter, ASS + VES C.T., Indicator, wiring and connection etc. as required complete in all respects but excluding the cost of switchgears. The cubical pedestal shall have cable entry box at both side, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form as required complete in all respects and the panel should be Approved/Tested from CPRI lab and should confirm IS 64139. Make: EVA/Power system control/DB Electromatic Pvt. Ltd.

450 mm deep (nominal)

Supplying and erection light and power sub-panel (confirming to IEC code - 61439) wall/floor mounted of following depth sheet metal cubical pedestal of suitable dimensions 1000mm (height) x 750mm (width) x 300mm (deep) with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with 5 Nos.compartments to hose 63/100 Amp. TP&N MCCB 1 No., 1 No. face indicator set, 100 Amp. busbar & both sides cable alley. The sub-panel is complete with copper busbar strips 100 Amps., and face Indicator set, wiring and connection etc. as required complete in all respects but excluding the cost of switchgears. The cubical pedestal shall have cable entry box at both side, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form as required complete in all respects and the panel should be Approved/Tested from CPRI lab and should confirm IS 64139. Make: EVA/Power system control/DB Electromatic Pvt. Ltd.

300 mm deep (nominal)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

40 Amp. - 18 KA

63 Amp. - 18 KA

100 Amp. -16 KA

200 Amp. -25 KA

400 Amp. - 50 KA

Makes:- L&T/Legrand/Schneider

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

Single pole. 6 Amp Cat-A.

Single pole. 16 Amp Cat-A.

Makes:- L&T/Legrand/Schneider

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider

Supplying and fixing following rating, four pole, 415 volts, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- L&T/Legrand/Schneider

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.

Double door-12 way

Double door-16 way

Makes:- L&T/Legrand/Schneider

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Riveting, sweating and soldering of copper/ G.I. tape (with another copper/G.I. tape, base of the finial or any other metallic object) as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required (for vertical run)

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required (for horizontal run)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Makes:- KEI/Havells

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Makes:- KEI/Havells

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

25 Liter capacity water heater (Cat-A)

35 Liter capacity water heater (Cat-A)

Makes:- Jaquar/Racold/Usha

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep, (Category-A)

Exhaust Fan, Heavy duty, 300 mm sweep, (Category-A)

Makes:- Jaquar/Racold/Usha/Crompton

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-

40 mm dia. G.I. pipe, heavy class

Makes:- TATA/Jindal/Ravindra

Supplying and fixing following LED street light comes with pressure die cast housing, with street optic LENS for uniform light distribution with secondary optics and IP66 protection including connections, testing etc. as required complete in all respects.

45 Watt LED Street Light

Makes:- Wipro(Cat No. LR02-501-XXX-57-XX)/Panasonic/Bajaj

Supplying and fixing LED integrated channel 10 Watt (1000 lumen), Neutral White and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.

LED integrated channel 10 Watt

Makes:- Bajaj(Cat No. BCLSB 10 NW)/Panasonic/Wipro

Supplying and fixing of LED Bulkhead with a nominal system output of 1000 lumens,CCT 6500K Ceiling and wall mount LED bulk head serves as an excellent energy efficient alternative to CFL/incandescent bulkhead luminaires suitable for surface and wall mounting application as required complete with all accessories, connections, testing and commissioning etc.

LED Bulkhead, 10 Watt

Makes:- Panasonic (Cat No. PBHM01107)\Bajaj\Wipro

Supplying and fixing IP 43- metal door Per Phase Isolation (Tier PPI) DB 8 Ways, suitable for four pole isolator as incomer, sub-incomer 2+2+2 modules and O/G : 8+8+8 modules including connections, testing & commissioning of the respective accessories of the same as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Per Phase Isolation (PPI) 8 Way

Makes: L&T (Cat. No. DBTP1008DD)/Legrand/ Schneider

Supplying and fixing IP 43- metal door Per Phase Isolation (Tier PPI) DB 12 Ways, suitable for 3/4 pole MCCB as incomer, sub-incomer 2+2+2 modules and O/G : 12+12+12 modules including connections, testing & commissioning of the respective accessories of the same as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Per Phase Isolation (PPI) 12 Way

Makes: L&T (Cat. No. DBTPL012DD)/Legrand/ Schneider

Supplying and fixing of LED Study Light 4 Watt and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.

Study Light LED 4 Watt

Makes:- Phillips ( Code 56240) / Jaquar / Changi

Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.

Ceiling Fan 1200 mm sweep, Category-A

Makes:-Usha (Technic plus minimum 3 star rating / Bajaj (Ultima) / Crompton Greaves

Ceiling Fan 1400 mm sweep, Category-A

Makes:-Usha (Striker 1 star rated)/ Bajaj (Ultima)

Supplying and fixing surface mounted round LED fixture 22 Watt size L/dia Ø168mm,H 50mm (2000 lumen), 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required complete in all respect.

Surface Mounted Round LED fixture 22 Watt (Non Chinese Make)

Makes:- K-lite (Bema round Cat. No. 7326)Wipro/Panasonic/Phillips/Tisva (Non Chinese Make)

Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 18Watt (1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required. complete in all respects.

led 18 Watt Tube fixture (4 feet)

Makes:-Havells(Batten Cat No. REGALBATTENT5UPTO1X18WDSBSWH + Tube Rod PHOTONULTRA+1213T8SSTL18WLED865SPC )\Bajaj\Wipro

Supplying and fixing circular surface mounted LED Luminaire 36 Watt (Ø500x57), 3600 lumen), 6000K suitable for surface application with the use of the latest technology and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required. complete in all respects.

36 Watt LED circular surface mounted.

Makes:- K-Lite ( Cat No: 2877) /Panasonic/Phillips/Tisva (Non Chinese Make)

Supplying and fixing LED linear compact strcture luminaire 40 Watt (3957 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required. complete in all respects.

LED linear compact strcture 40 Watt (4 feet)

Makes:- Wipro (Cat No. LL24-541-XXX-57-XX) / Phillips/ Tisva (Non Chinese Make)

Supplying and laying of Rubber insulation mat having thickness 12 mm conforming to IS:5424-1969 black / plain / design as required complete in all respects.

Providing and fixing Aluminium composite panel Sheet for exhaust fan as required complete in all respects.

Supplying and fixing of 32 Amp power unit for geyser including connections,installation, testing and commissioning etc. as required.

32 Amp Power Unit for Geysers

Makes:- Legrand ( Cat No 572154) /L&T /Schneider

Providing and fixing LED Lamp 9 Watt B22 suitable for Wall Bracket, Batten holder etc. as required complete in all respects.

Makes:- C&S (Cat No. LTHOLED LAMP 7WB22/ Panasonic/Osram

Supplying of self supporting platform ladder heavy duty made out of side Aluminium "C" Section 66x31mm & Climbing steps made of Aluminium 63mm wide (2.1/2") non slipery both side steps, Side plug Fire & Rust proof having serviceman platform 16"x12" at the top & rubber shoes are fitted at four legs. Ladder Size 8 feet. as required complete in all respects.

JAMWAL ELECTRICAL WORKS

SHARMA ELECTRICAL CO.

Malhotra Associates