Karjan Irrigation Project

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified by

the Engineer and valued at the rates and prices tendered in the priced Bill of Quantities,

where applicable, and otherwise at such rates and prices as the Engineer may fix within

the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as

it is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to enter

a rate or price shall be deemed to be covered by other rates and prices entered in the Bill

of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant sections

of the contract documentation shall be made before entering rates or prices against

each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping with a

tractor of at least 150 kw with a single rear mounted heavy dutyripper.

BILL OF QUANTITIES

Name of Work: Providing and Erecting of Street Light, Cable, Cable tray, Earthing Works

Stabilizer and Power Panel at Karjan Dam.

Items Quantities Item of Work Estimated Unit Total amount

Items Quantities Item of Work Estimated Unit Total amount

No. estimated Rates(In according to

figures) estimated

1 1 Supplying 3 Phase Isolation Transformer 253858.28 No.

followed by 3-Phase automatic digital micro

processer. based servo control voltage

stabilizer, air cooled, with indoor enclosure

with bottom cable entry with MCB at input &

contactor at output for tripping at various fault

condition. Stabilizer suitable for unbalanced

input voltage & unbalanced load. Protection

for over voltage, under voltage, over load,

short circuit & single phasing preventer. With

LCD display, with back light for displaying

input/output voltages & load current along

with fault/trip messages/Class-C surge

protection device included copper wound

winding.Input: 320‐500/400V, 3‐Phase,

Hz, 3‐Wire + Earth, Output: 400VAC+/-1%,

3‐phase, 4‐Wire + N + Earth FOLLOWING

(a) Rating 40 KVA[ Approved Make-

Voltamp, Kiloaskar, L&T, Siemens]

2 80 Supplying and erecting LED street light / 3345.12 No.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage

protection. (a) 48 watts [Approved Make -

Philips, Wipro, Crompton, Havells, Surya,

2a 24 (b) 250 watts [Approved Make - Philips, 10818.11 No.

Wipro, Crompton, Havells, Surya, Bajaj,

3 1200 Supplying and erecting Flexible PVC 46.46 Mtr.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

(a) 1.50 Sq.mm 3 core round PVC sheathed

[Approved make - Polycab, Havells,

RRKabel, Finolex, Anchor]

4 400 Supplying and erecting Flexible PVC 284.82 Mtr.

insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.(a) 3 1/2 core 50 Sq.

mm ( 25 Sq. mm 1/2 core) [Approved make

- Polycab, Havells, RRKabel, Finolex,

5 180 Providing and, fixing heavy duty flange type 38.38 No.

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

(a) 4 core 6 Sq. mm

5a 60 (b) 4 core 10 Sq. mm 38.38 No.

5b 20 (c) 4 core 16 Sq. mm 47.47 No.

5c 30 (d) 4 core 25 Sq. mm 51.51 No.

6 30 Providing and, fixing heavy duty flange type 75.75 No.

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating

tape etc for following size of cables.

(a) 3 & 1/2 core 35/50 Sq. mm

7 500 Solder less crimping type Aluminium lugs 6.06 No.

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts

in an approved manner. (a) 1.5/ 2.5/4/6

8 100 Providing & Erecting perforated G.I. Cable 698.16 Mtr.

Tray size as below with all necessary

accesS.O.R.ies for fitting like coupler S.S.

Nut bolt.Cable tray with cover fabricated from

G.I.M.S.sheet having thicknes 2 mm.

(a) Cable tray size 100 x 50 x 2 mm

8a 200 (b) Cable tray size 200 x 100 x 2 mm 1133.83 Mtr.

8b 600 (b) Cable tray size 300 x 100 x 2 mm 1606.99 Mtr.

9 480 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

10 400 Providing & laying approved make ISI 249.47 Mtr.

marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of

cable. The pipes as following size of dia &

weight per 6 mtr.(A) 63 mm inner Dia.

[Approved Make - Dutron, Universal,

Duraline, Gamson, Dolphin, Rudra]

11 100 Supplying and erecting B class Galvanized 326.23 Mtr.

iron pipe having smooth finished bore of the

pipe on both ends erected nuts and bolts

along the pole / wall shaping the pipe as per

site requirement. Pipe dia as following.

12 100 Painting of street light pole with bracket 215.13 No.

complete with two coats of Aluminium paint

for following size of pole.

(A) up to 4 mtr

12a 80 (B) up to 6 mtr 265.63 No.

13 120 Supplying & erecting approved make SMC 515.10 No.

press moulded composite FRP. loop-in, loop-

out approx. 2mm thick box complete with

Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per

requirement having locking arrangements

with mounting clamp with nuts, bolts &

washers suitable for erection on pole with

cable clamps& earth bolt of following size of

(A) 250mm x 200mm x 100mm [deep]

[Approved Make - Sintex, National, EPP,

Hensel, Green composites]

14 2000 Providing and erecting XLPE (IS:7098)(I)-88 140.39 Mtr.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables.(A)

core 10 Sq. mm [Approved Make - Avocab,

Havells, Finolex, RRKabel, L&T, Polycab]

15 2 Supplying and erecting triple pole & neutral 10559.55 Rn.Mtr.

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.

(A) Suitable for 630 Amp. capacity

16 3 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

17 1 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.[Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

18 1 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration certificate.

[Approved Make-Gelco, Meco, Schneider,

Siemens, Techno]

19 3 Providing & erecting L.T. Current 274.72 No.

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

20 2 Supplying and erecting Ammeter / Voltmeter 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

21 3 providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

22 1 Supplying & erecting approved make Four 22255.35 No.

Pole 415V change over switch interior for

panel mounting with operating mechanism

A.C.23 duty confirming to IS for

(A)400A [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

23 1 Providing and erecting Approved make Four 28173.95 No.

pole moulded case circuit breaker having

breaking capacity ICU of 50 K.A. and above

at 415 V having normal current rating up to

630A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

24 1 Providing and erecting Approved make Four 25228.79 No.

pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A.

with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

25 3 Providing and erecting Approved make Four 20946.39 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A.

with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

26 3 Providing and erecting Approved make Four 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

G.M.S.housing ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

27 3 Providing and erecting Approved make Four 8055.76 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

28 3.75 Providing & erecting weather proof, dust & 14902.55 Sq mtr

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.The panel size: 2.5 mtr(W) X

1.5 mtr (H)(A) The standard companies

switch gear shall be used and only

manufacturers at CPRI approved factory (i)

with 350mm depth [Approved make- Make

will be approved by Engineer-in-charge]

29 100 Providing and erecting XLPE (IS:7098)(I)-88 79.79 Mtr.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables.(A)

core 4 Sq. mm [Approved Make - Avocab,

Havells, Finolex, RRKabel, L&T, Polycab]

30 2000 Providing and erecting XLPE (IS:7098)(I)-88 140.39 Mtr.

ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

(A) 4 core 10 Sq. mm [Approved Make -

Avocab, Havells, Finolex, RRKabel, L&T,

31 1500 Providing and erecting XLPE (IS:7098)(I)-88 153.52 Mtr.

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

(A) 4 core 16 Sq. mm [Approved Make -

Avocab, Havells, Finolex, RRKabel, L&T,

31a 1330 (B) 4 core 25 Sq. mm [Approved Make - 190.89 Mtr.

Avocab, Havells, Finolex, RRKabel, L&T,

32 400 Providing and erecting XLPE(IS:7098)(I)-88 220.18 Mtr.

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

of following size of cables

(A) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

core) [Approved Make - Avocab, Havells,

Finolex, RRKabel, L&T, Polycab]

33 12 Providing approved make junction box 20200.00 No.

outdoor type made from 1.6 mm thick

Stainless steel AISI 304. Confirm to IS

part-V Sheet .The box size 400 mm x300mm

x250mm deep . The junction box provided

with 1 nos 63A 4 pole MCB

(C&S,L&T,siemens, havells make only),cable

termination kit suitable for 70sqmm to

120sqmm cable, 63Amp industrial-socket,

complete with internal wiring

sq.mm copper wire & suitable lugs,

necessary Accessories The box shall be

provided with front hinged door And locking

arrangement, rubber packing,bakelite sheet

for erection of above items in junction box

and Danger notice board on door. (Welding

Junction box at Spillway) [Approved Make -

Sintex, National, EPP, Hensel, Green

34 3 Supplying approved make Junction Box 21478.41 No.

outdoor type in two compartments made from

1.6 mm thick Stainless steel AISI 304 confirm

to IS 1570 part-V Sheet .The power

compartments size 400 mm and Control

compartment size 200 mm Junction box sizes

600 x 600x 300 mm with 300 mm leg made

from 35x35x3 mm angle complete fabricated.

The junction box provided with 3 Nos 32 A

MCB FP (C&S, L&T, Siemens) & 1 nos 63A

pole MCB (C&S, L&T, Siemens) complete

with internal wiring 4 sq.mm copper wire &

suitable lugs. All necessary AccesS.O.R.ies

including the item. The box shall be provided

with front door hinged at one end. And

locking at other end, rubber packing should

be provided on closing door. And having

cover inside for M.C.B.& Danger notice board

on door.[Approved Make - Sintex, National,

EPP, Hensel, Green composites]

35 10 Supplying and erecting approved make 5556.01 No.

Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall

be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be

erected With Suitable foundation (Included)

as per details given by manufacturer

considering site requirement.(A) 4 Mtr. Long

70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base

plate, 4-M16 Bolts and 450mm long with

necessary G.I. J Bolts .Approx weight 37 kg

[Approved Make- Utkarsh, Bajaj, RR ISPAT,

FAB, Crompton, Tranrail]

35a 40 (B) 5 Mtr. Long 70 mm Top X 130 mm 6874.06 No.

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16

Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg [Approved

Make- Utkarsh, Bajaj, RR ISPAT, FAB,

Crompton, Tranrail]

36 50 Supplying and erecting Street light pole 491.87 No.

bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with

suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for

76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded

stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide /

PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr [Approved

Make - Sintex, National, EPP, Hensel, Green

36a 12 [B] Double Arm Bracket 0.5 Mtr [Approved 622.16 No.

Make - Sintex, National, EPP, Hensel, Green

37 1200 Providing & laying approved make ISI 108.07 No.

marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of

cable. The pipes as following size of dia &

weight per 6 mtr.

(A) 40 mm inner Dia. [Approved Make -

Dutron, Universal, Duraline, Gamson,

Dolphin, Rudra]

38 10 Supplying and erecting B class galvanised 343.40 No.

iron pipe 32 mm outside dia 45 cm long duly

welded on 20 cm x 20 cm x 3 mm thick M.S.

base plate, erected on wall or corner for

mounting street light luminaire with necessary

hardware materials duly painted.

39 2 Supplying Feeder pillar outdoor stand 35713.43 No.

mounted made from 1.6 mm thick Stainless

steel AISI 304 Confirm to IS 1570 part-V

Sheet, Size 500 mm x 500 mm x 300 mm

deep with leg made from 35x35x3 mm angle

complete fabricated. The Feeder pillar with

A TPN MCB incomer (C&S, L&T, Siemens),

single dial time switch, 45A TP contactor

(C&S, L&T, Siemens) for the automatic

switching of luminaries, power tool control

with 2 no 9 A contactors and raise lower push

button, Incoming 35 sq.mm and outgoing

& 2.5 sq.mm terminal complete with internal

wiring 4 sq.mm copper wire & suitable lugs.

All necessary AccesS.O.R.ies including the

item. The box shall be provided with front

door hinged at one end. And locking at other

end, rubber packing should be provided on

closing door. And having cover inside for

M.C.B.& Danger notice board on door.

40 7 Supplying & erecting earth pit of minimum 4591.46 No.

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover. (A)(approved make OEM has to

submit test certificate including value of earth

resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to

retain moisture for long time Necessary test

report must be submitted by Agency.

(a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

[Approved Make- Make will be approved by

Engineer-in-charge]

41 40 Providing and erecting required size HOT 77.77 Kg

deep Galvanised iron strip for earthing of H.T.

, OCB/ ACB/ Transformer LT panel board,

Motors etc. using proper clamp.

42 1500 Providing & laying approved make Double 62.62 Mtr.

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench

for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer

dia [Approved Make - Veronica, Dutron, Rex,

Gemini, Duraline]

43 10 Labour charges for Magnetic brake servicing 795.28 No.

including cleaning, oiling, setting, testing &

connection wire cable from D.H.U. etc.& put

magnetic brake in operation in all respect.

44 4 Rewinding of Coil for Magnetic brake drum 2022.45 Set

dia. 7" and 5 1/2" by using Super enamel

Copper wire of suitable size. (Or as per

sample of dam site)

45 10 Labour charges for forward & reverse motor 593.26 No.

starter panel servicing & repairing including

supply of wire, ferrul, lugs & other misc.l item,

complete repairing & put into operation.

46 20 Providing & erecting Push button with 186.98 No.

elements. (BCH, L&T, Siemens, Tecknik or

equivalent make approved by Engineer in

47 20 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

48 5 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration

certificate.[Approved Make-Gelco, Meco,

Schneider, Siemens, Techno]

49 5 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate. [Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

50 12 Supplying and erecting LED street light / 4819.72 No.

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

ranges shown.)(A) Post Top Lantern LED

fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with

opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories

wired upto terminal block.IP 65(i)40W

[Approved Make - Philips, Wipro, Crompton,

Havells, Surya, Bajaj, Orient]

51 2500 Making trench in soft soil of suitable width of 55.55 Mtr.

90 cm deep for laying cable or locating the

fault all over the run and back filling the

same and making the surface as normal

52 2500 BY back old GI pipe, panel board, cable,PVC 30.30 Kg. -75750.00

pole box, old pole, Bracket, MCB, MS box all

Electrical scarp Item.

53 1 Supplying and erecting triple pole & neutral 3202.71 Rn.Mtr

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.(A) Suitable for

200 Amp. capacity

54 3 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

55 1 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.[Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

56 1 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration

certificate.[Approved Make-Gelco, Meco,

Schneider, Siemens, Techno]

57 3 Providing & erecting L.T. Current 274.72 No.

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

58 2 Supplying and erecting Ammeter / Voltmeter 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

59 3 Providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A suitable to operate on

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

60 1 Supplying & erecting approved make Four 12241.20 No.

Pole 415V change over switch interior for

panel mounting with operating mechanism

A.C.23 duty confirming to IS for

(A)200A Approved Make - Siemens,

Schneider, L&T, ABB, Havells, C&S]

61 1 Providing and erecting Approved make Four 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

ICS=100% of ICU only [Approved Make -

Schneider, L&T, ABB, Siemens, Havells,

62 3 Providing and erecting Approved make Four 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

63 21 Providing & erecting 240 V MCB double pole 278.76 No.

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

64 2 Providing & erecting 415 V MCB Four Pole 595.90 No.

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

:8828 in existing box having following

(A) 32 Amp. [Approved Make - Schneider,

L&T, ABB, Siemens, Havells, MDS, C&S]

64a 6 (B) 63 Amp. [Approved Make - Schneider, 737.30 No.

L&T, ABB, Siemens, Havells, MDS, C&S]

65 3.6 Providing & erecting weather proof, dust & 14902.55 Sq mtr

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.The panel size: 2.0 mtr(W) X

1.8 mtr (H)(A) The standard companies

switch gear shall be used and only

manufacturers at CPRI approved factory (i)

with 350mm depth [Approved Make- Make

will be approved by Engineer-in-charge]

66 1 Supplying and erecting Direct-on-line, Starter 2046.26 No.

with 15A.rating contractor and with 4-14A.

range, directly operated thermal overload

relay in sheet steel enclosure for 3phase

415V.50 c/s. A.C. motor up to

H.P.complete erected on P.W. Block with

necessary connection.

67 40 providing and erecting Mains with ISI marked, 17.17 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays,

power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts

and bolts if required.

(A) One wire 1.50 sq. mm

67a 45 (B) One wire 6.00 sq. mm 56.56 Mtr.

67b 40 (C) One wire 10.00 sq. mm 91.91 Mtr.

67c 40 (D) One wire 16.00 sq. mm 142.41 Mtr.

68 70 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

69 1 Supplying and erecting triple pole & neutral 7319.47 Rn.Mtr

440V / 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. /

sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each bar, erected in existing cubical panel

with necessary connections.(A) Suitable for

400 Amp. capacity

70 3 Supplying and erecting approved make 43.43 No.

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

71 1 Supplying and erecting approved make panel 1275.63 No.

mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all

connection, wiring etc .with manufacturers

calibration certificate.[Approved Make-Gelco,

Meco, Schneider, Siemens, Techno]

72 1 Supplying and erecting approved make panel 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc

.with manufacturers calibration

certificate.[Approved Make-Gelco, Meco,

Schneider, Siemens, Techno]

73 3 Providing & erecting L.T. Current 274.72 No.

Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA

box duly secured with insulating materials

connected to the meter

74 2 Supplying and erecting Ammeter / Voltmeter 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

75 3 providing and erecting Miniature circuit 112.11 No.

breaker single pole 6A suitable to operate on

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

76 1 Supplying & erecting approved make Four 22255.35 No.

Pole 415V change over switch interior for

panel mounting with operating mechanism

A.C.23 duty confirming to IS for

(A)400A [Approved Make - Schneider, L&T,

ABB, Siemens, Havells, MDS, C&S]

77 2 Providing and erecting Approved make Four 25228.79 No.

pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at

415 V having Normal current rating 400A.

with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only [Approved

Make - Schneider, L&T, ABB, Siemens,

Havells, MDS, C&S]

78 2 Providing and erecting Approved make Four 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

variable Thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing

G.M.S.housing ICS=100% of ICU only

[Approved Make - Schneider, L&T, ABB,

Siemens, Havells, MDS, C&S]

79 1 Providing and erecting Approved make Four 20946.39 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A.

with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only [Approved

Make - Schneider, L&T, ABB, Siemens,

Havells, MDS, C&S]

80 3.60 Providing & erecting weather proof, dust & 14902.55 Sq mtr

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.The panel size: 2.0 mtr(W) X

1.8 mtr (H)(A) The standard companies

switch gear shall be used and only

manufacturers at CPRI approved factory (i)

with 350mm depth [Approved Make- Make

will be approved by Engineer-in-charge]

81 40 providing and erecting Mains with ISI marked, 17.17 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat

resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays,

power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts

and bolts if required.(A) One wire 1.50 sq.

81a 10 (B) One wire 25.00 sq. mm 236.34 Mtr.

81b 30 (C) One wire 35.00 sq. mm 300.98 Mtr.

82 80 Providing , erecting , fabricating the M.S. 77.77 Kg

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding,

grinding & finishing duly painted with one

coat of red oxide with erection on site as per

direction of engineer in charge with

necessary grouting, cementing, plastering &

finishing complete.

* All rates are exclusive of GST

I/We am/are willing to carry out the work at…………………….% above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our Quotation works out as under.

Estimated amount put to Quotation Estimated amount put to Quotation

Deduct……………% below Add……………….…% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge and as per GR No. MIS/102010/17(2)/k-1 of dtd. 29/01/2011 for which no extra

payment shall be made.

2. The labor cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and

hold good for work under all conditions, site, moisture, weather etc.

5. The quoted rates should be inclusive of cost of minor rectification work which may have to be done for

correcting the distortion caused during transportation of the gate components.