ADDITION ALTERATION SPECIAL REPAIR OF BUILDING NO P 133 P 276 AT CTW K AND SPECIAL REPAIR REPLACEMENT OF EXISTING CONVENTIONAL LIGHTS TO SUITABLE LUMINANCE LED LIGHTS IN DR KALAM AUDITORIUM IN P 49 BUILDING AT NIAT UNDER GE NW KOCHI

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

S&F Non skid Ceramic tiles 7-8 mm thick coloured tiles (square/ rectangular) polished, of size 600X600 mm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed bed or bedding layer of mortar in CM 1:4 all as specified and directed.

S&F Non skid Ceramic tiles 7-8 mm thick coloured tiles (square/ rectangular) polished area of each tile exceeding 0.18 Sqm not exceeding .38 sqm, in vertical surfaces as skirting over and including 10 mm thick cement plaster 1:3 and pointed in white or coloured cement to match the colour of tiles all as specified and directed.

M&L for non-skid rectified ceramic tile 7-8mm thick area exc 0.11sqm and n.exc 0.18sqm over and incl cement screed 10 mm thick in CM 1:4 with WPC as per manufacturer's instruction over and including 25 mm thick PCC 1:2:4 type B0 levelling course on RCC slab complete all as specified. Note:- WPC shall be measured and paid separately.

M&L for Glazed ceramic tiles in vertical surface 450 x 350 x 7 / 350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10 mm thick rendering CM 1:3 complete .

Taking down cement plaster on brick/ concrete walls incl raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and directed.

M&L for renderinf 8 mm thick in CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6. mm thick plaster on fair faces of brick or concrete surfaces finished even and smooth without using extra cement.

Supply only integral liquid water proofing compound.

M&L for preparation new plastered internal surfaces and applying two coats of Interior Emulsion (Asian Royale interior emulsion or equivalent) over a coat of primer incl 1.5mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation of new plastered External surfaces for preparation of surface and applying two coats of weather proof antifungal paint (Asian- apex Ultima Protek or equivalent) over a coat of suitable primer incl 1.5mm thick wall care putty, complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame).

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame).

S&F powder coated anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

M&L for 12 mm thick pre-laminated particle board , interior grade, prelaminated both side with decorative choice lamination , fixed with screws to aluminium frame work complete all as specified and as directed.

S&F Sheet glass ordinary quality and glazing without oil putty in square pane exc 0.50 sqm in each pane and 5.5 mm thick fixed with rubber beadings to aluminium frame work complete all as specified and as directed. .

S&F hydraulic door closer designation No:03 universal type suitable for door shutters of 851 to 1000 mm in width aluminium extruded section body all as specified.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

S&F Powder coated aluminium window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F Powder coated aluminium 10 mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bidding complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in squares not exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width and girth complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, & fixing in opening as per specification & drawing.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing shown in SSR all as specified.

S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised complete all as specified and as directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of size 150 mm long complete all as specified and as directed.

S&F in repair 150 mm aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts etc complete all as specified and as directed.

S&F 125mm SS Butt hinges complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete, PVC or any material with any diameter) set in cement mortar fixed in floor or in wall with clamps complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in wall / floor in any length with rubber ring joints complete.

S&F PVC (SWR) pipes 110mm dia single socketed, in wall / floor in any length with rubber ring joints complete.

PVC (SWR) bends with access door any radius 110mm

PVC (SWR) bends with access door any radius 75mm

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F in repairs 15mm bore Pillar taps cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs CP brass towel rail 60 cm long fixed complete all as specified.

S&F in repairs vitreous china urinals coloured half stall type including all fittings complete all as specified and as directed. Make: Parry ware cat No - C0578 White Colour / Johnson Cat No-P0519PW / Jaguar Cat No- URS-WHT-13261

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe

S&F in repairs Chinaware partition for urinal of size 310 x 700 mm all as specified and as directed.

S&F in repairs Push tap high pressure suitable for urinals complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle incl brackets, and Flush pipe of polyethylene low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore). Make:- Parry ware Cat No- T3203A1 or Johnson Cat No- T0060C or Jaguar Cat No- ALD-769L300x190

Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof (antifungal, Asian Ultima Protek) paint over a coat of suitable primer over 1.5mm thick wall care putty, complete all as specified and as directed by the Engineer-In-Charge. Note:- The painting shall be carried out through authorised applicator of manufacturere. Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for preparation and complete removal of existing treatment and applying two coats of Interior Emulsion (Asian Royale interior emulsion) over a coat of primer and 1.5mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6, exc 10 cm in width and setting in mortar in CM 1:6, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed brackets of angles s cut to shape, drilled and counter sunk for screw, including welding and bending angles, as necessary, gusset plates, riveting etc all as specified and as directed,

Demolition of unreinforced cement concrete in any description and in any position not otherwise specifically provided for

M&L for plain cement concrete type B2 1:2:4 in walls or retaining walls, any thickness, size or shape including columns pillars for inserting angles to sea wall etc all as specified and as directed

M&L for preparation of new Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete (Make-Asian Apcolite or Equal from Berger, Nerolac)

S&F 3 coil concertina coil of 610mm diameter made out of 2.6mm dia spring steel core wire 240 g/m 2 (min) dipped with corrosion preventive fluid (rusilo 901) of Castrol make in white colour Each coil having a minimum 50 turns(circles) and an average weight not less than 8.57Kg (Plus or minus 5%) of coil erected in position on top of compound wall (length of each coil -6.2mtr) (ragger length min 10mm and spacing between raggers max 25mm centre to centre all as specified and as directed.

S&F in repairs galvanised 2 strand steel, barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wires, staples, steel pins etc all as specified and as directed. Note : Each line wire to be measured.

Demolition of wall and ceiling boards or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.

S&F Suspended false ceiling consisting of 8mm thick calcium silicate seamless board suspended on GI framework with staggered joints, consist of GI perimeter channel 25mmX20mm of 22 gauge along perimeter of false ceiling, Channel section of 50X25mm of 22 gauge and at 300mm centre to centre throughout one way fixed with screw/nut bolt and other direction 40x15 mm 22 gauge channel provided with interlocking with GI cleat and expansion fasteners including hangers 6mm dia GI fixed to roof truss, Boards are to be joined and finished so as to have a flush look which includes finishing the tapered and square edges of the calcium silicate board with joining compound paper tape and two coats of plastic emulsion paint over one coat of primer suitable for calcium silicate board including necessary scaffolding and shuttering complete as directed as specified and directed by Engr-in-Charge.

S&F in repair on wall/concealed on wall high pressure CPVC pipes 40mm dia, SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents complete all as specified and directed.

S&F in repair on wall/concealed on wall high pressure CPVC pipes 25mm dia SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents complete all as specified and directed.

S&F in repair on wall/concealed on wall high pressure CPVC pipes 20mm dia SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents complete all as specified and directed.

Taking down old bib tap, stop cock, shower ,pillar tap, sink cock,angle valve, health faucet, Self closers Pressmatic & angle cock etc complete all as specified and as directed.

S&F Bib cock , CP quarter turn with flange and aerator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge. Make : Model No F2004151 of Cera or equivalent model of other manufactureres from list.

S&F CP Bib cock short body with flange and nozzle for garden / washing machine of size 15 mm including necessary fixing accessories to GI/CPVC pipes complete all as specified and as directed by the Engineer-in-charge. Make: CERA : Model No 2003153 of Cera or equivalent model of other manufactureres from list.

S&F concealed stop cock regular body, Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directed by the Engineer-in-charge. Make : Model NO: F2002362 of Cera or equivalent model of other manufactureres from list)

S&F 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for CPVC pipe complete specified and as directed by the Engineer-in-charge. Make : Model No: F2004201 of Cera or equivalent model of other manufactureres from list)

Taking down old PVC connection complete all as specified and as directed.

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed by the Engineer-in-charge.

S&F Health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , including taking out old one all as per specified and directed (Make : Model No: F8030102 of Cera or equivalent model of other manufactureres from list.

S&F pillar taps, swan neck spout with aerator, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, complete all as specified and directed by the Engineer-in-charge. Make : Model No:F2004105 of Cera or equivalent model of other manufactureres from list.

Supply and Fixing of Kitchen sink cock quarter turn wall mounted with long swivel spout not less than 150 mm and wall flange complete all as specified and as directed . Model No: F2004251 of CERA or equivalent model of other manufactureres from list.

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed by the Engineer -in-Charge. Make:- Cat Part No. F7020101 of Cera or equivalent model of other manufactureres from list.

M&L for cutting chasses on walls floor etc not exceeding 20 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed by the Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness, above ground level in the foundation

Material and labour for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed .

Taking down old rotational moulded polythene water storage tanks of capacity 2000 ltrs complete all as specified and as directed.

Taking down old rotational moulded polythene water storage tanks of capacity1000 litres complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed.

Taking down old CPVC ball valve of size 20 mm /25 mm/40mm complete all as specified and directed.

S&F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed.

S&F float valve synthetic (PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and fly nut complete all as specified and directed.

S&F CP angle cock, Self closers Pressmatic with wall flange and 200 mm connecting pipe for urinal pots to fixed in 15/20 mm Pipe, complete all as specified. Make : Cera Model No: F 9020203 or equivalent model of other manufactureres from list.

Taking down old float valve synthetic(PVC) of size 25 mm complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. and making good disturbed surfaces of walls, floors, etc.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting, modular white cover plate, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch

All as per item No. 86 above but for One fan point / exhaust fan point controlled by one switch & regulator on independent board.

All as per item No. 86 above but for One 5 pin 5 Amps Socket point controlled by one switch on same board.

All as per item No. 86 above but for One 5 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No. 86 above but for One bell point controlled by one switch on independent board.

All as per item No. 86 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board.

All as per item No 86 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure

S & F modular switch 1 way 6 Amps,1 module

S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body

S & F Modular socket 6 Amps and 2/3 pin combined 2 module.

S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module

S & F Modular type switch 15 A One way SP

S & F bell push button flush type 5 Amps

S & F ding dong bell AC 230 V single pole

Taking down existing Light fittings of any type and size and removing to store yard.

S&F LED indoor commercial suspended lighting solution with 52mm width and 75mm height with efficacy 100LM/W, 18 W, WW,240 volt all as directed. Make:- CG Cat Part No. CCP-121-18-57-SL-NWH or equivalent model of other manufacturers from list.

S&F LED Tube light fitting 25W, 4 ft with extruded aluminium batten for continuous operation connected accessories complete all as specified and directed. Make:- Philips Cat Part No BN 021 LED25S 6500 PSU GR S1 or equivalent model of other manufacturers from list.

S&F LED Surface Mounted square shaped luminaire with low height housing and High transitivity diffuser 32 W,240 volt all as per specified and directed. Make:- Philips Cat Part No.SM365C LED32-6500 PSU OD WH or equivalent model of other manufacturers from list.

S&F LED Mirror light fitting 10 watt with connected accessories complete all as specified & directed. Make:- Philips Cat Part No. BN 021 LED10S 6500 PSU GR S1 or equivalent model of other manufacturers from list.

S&F LED indoor wall decorative light 14 W WW 240 volt all as per specified and directed. Make:- Luker Cat Part No. LWL 110-2 or equivalent model of other manufacturers from list.

S&F Building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt including suitable GI bracket of 25 mm dia 1.5m long (max) and fixing arrangement on walls all as specified and directed. Make:- Crompton Cat Part No. LSTS-45-CDL-M or equivalent model of other manufacturers from list.

S&F LED flat panel with high brightness with glare free recessed 2 feet by 2 feet 36 Watt 4000k fitting including all connection all as specified and directed. Make:- Philips Cat Part No. RC380BLED36S-6500G4L60W60 PSUOD or equivalent model of other manufacturers from list.

S&F Flame proof/ Weather proof LED tube light fitting (4 feet) suitable for 2 x 20 watt with glass & connector suitable for LED tube light with all accessories prewired, product in Aluminium die cast alloy LM6 construction of Gas Gr. IIA, IIB certified by CIMFR (No Suggestions) &CCOE(PESO) Nagpur along with ISI marking including testing complete all as specified and directed. Make :- Cat part No. CG part No EXTN2LT8-16/20 or equivalent model of other manufacturers from list.

S&F Ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete incl taking down all as specified. Make:- CG Cat Part Energion HS BLDC or equivalent model of other manufacturers from list. Note :-Old exhaust fans shall be deposited to MES store yard. The cost of transportation shall be included in the quoted rate.

S&F Heavy duty exhaust fans AC single phase 230/ 240 V of size 450 mm sweep, 900 rpm complete incl taking down all as specified. Make:- Havells Turbojet SP of M/s Havells or equivalent model of other manufacturers from list. Note:- Old exhaust fans shall be deposited in MES store yard.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / re-fixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

All as per item Ser No 113 above but wall mounted fan of 400 /450 mm sweep complete all as specified.

S&F Exhaust fans AC single phase 230/ 240 V of size 250 mm sweep, White, Plastic 1200 rpm complete all as specified. Make:- Havells Ventil Air -Dx white or equivalent model of other manufacturers from list. Note:- Old exhaust fans shall be deposited to MES store yard.

S&F Fan regulator electronic step type, modular type, 120W, 2 module complete all as specified and as directed.

M&L for galvanised iron Strip of size 25x4 mm as in Earth continuity or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified ans as directed.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete.

Taking down old Changeover/DBs with MCCB/MCBs of any size

S&F Sheet metal enclosure vertical TPN for DB's when MCCB's to be used 4 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed. Make L & T cat No DBVTL006GD /Havells/Legrand

S&F Sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar double door IP 43 glazed door complete all as specified and as directed. Make L & T cat No DBTPN004GD or equivalent model of other manufacturers from list.

S&F On load changeover switch with Sheet metal enclosure 100 amps 415 V 3ph complete all as specified and as directed. Make Havells cat No IHCNFE0100 or equivalent model of other manufacturers from list.

S&F SPN sheet metal enclosure for DB 8 ways Double door.

S&F MCCB 3 pole, 415 Volt fixed type 125 Amps with breaking capacity 16 KA complete all as specified and directed.

S&F MCB 'B' Curve 63 Amp 4 pole, 415 Volts, all as specified and directed. Make L&T Cat Part No. BB40630B or equivalent

S&F MCB 'B' Curve 6-32 Amp SPN ,240 Volts all as specified and directed. Make L&T Cat Part No. BB20320B or equivalent

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, all as specified and directed. Make Schneider Cat Part No. BB10060B to BB10320B or equivalent

Taking down old sub main wiring of any size

M&L sub main wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 4 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connecting with suitable size thimble complete all as specified and as directed. Note:02 run of 4 sqmm size PVE cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

All as per item No 127 but 2 single core 6 Sqmm cable with with 6 Sqmm earth wire complete.

M&L sub main wiring with 4 runs of 10 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC conduits and all accessories, with 1 run of 10 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls/floors/ceiling etc all as specified Note:- Five run of cable and one run of PVC conduits shall be measured as one unit

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm as earthing lead by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point including taking down old earthing all as specified or indicated including testing on completion.

S&F Single phase starter in sheet metal enclosure 1ph 240 Volt, 50Hz MU-2P maximum motor output 3 HP motor including taking down old single phase starter all as specified and directed Make L & T cat Part NO CS90319KODO /Legrand/ Havells

T L ALOSIOUS

MS BUILDERS

JESWIN BUILDERS

ANIE JOHN CONTRACTORS