SPECIAL REPAIRS TO CERTAIN SMQS AT AF STATION 1 JAMNAGAR

Amount

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debris to outside MOD land complete all as specified and directed.

Demolition of stone / brick / concrete block masonry built in Cement mortar complete including removal of debris to outside MOD land complete all as specified and directed, all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of debristo outside MOD land complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land

Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all specified and directed.

M&L for PCC solid blocks masonry 1:5:8 (20mm graded stone aggregate) exc 10 cm in width and setting in CM 1:6 as in wall/pillars etc. complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, bed blocks for hold fasts and similar works etc. complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT steel bars as in reinforcement 10 mm dia and over, cut to length, bent to shape as required including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.

Use and waste of formwork to soffits of suspended slabs n exc 200 mm thick such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:4 over PCC block masonry wall surface, finished the surfaces even and smooth without using extra cement all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, including finishing the surface even and fair complete all as specified and directed.

M & L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) as in levelling course in flooring complete all as specified and directed.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.06 sqm but not exeeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid, joint free (edgecut) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) of size 300 mm x 450 mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed by Engineer-In-Charge.

S&F 35 mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to wooden shutters complete.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint r all as specified and as directed by Engineer-In-Charge.

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including alumminium anodised butt hinges 100mm long, 100 mm long tower bolt and handle 150mm long as per specification and drawing complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737)

(e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736). Note:- Section No given above are of make Jidal, Contractor may use similar section of make Hindalco / Indal / Nalco

S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of make Hindalco / Indal / Nalco

M & L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for 100 mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified.

S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and as directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy.

S & F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L Mild steel flat iron as in hold fast and similar work fixed to chowkhat complete all as specified and as directed by Engineer-In-Charge.

M & L for cutting holes in brick wall built in cement mortar or stone wall built in lime mortar exc half brick and n. exc one brick thick for inserting holdfasts and making good dismantling portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified

S&F in repair white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including cast iron bracket comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete. (c) PVC waste pipe 32 mm dia 750 mm long complete.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with alumininium hinging device, including all connection complete.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

Supply and fix in repairs 10 Litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle & flush pipe,PVC connection fixed in position and connecting complete.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repairs brass peg set, solid body, 175 mm to 250 mm of Minimum 05 hooks complete all as specified and directed.

S& F in repairs brass chromium plated shower rose 125mm size with arms 15 mm inlet complete.

S&F in repair 15 mm size stop cock (concealed type), cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm size angular stop cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm size bib cock(short body) cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm size bib cock(long body) cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair soap dish stain less steel all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Supply and fixing 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified.

Supply and fixing 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified.

All as per item No 55 above but refaxing of old pipes of 15 mm dia retrieved from BOQ Item No 53 above.

All as per item No 56 above but refaxing of old pipes of 20 mm dia retrieved from BOQ Item No 54 above.

S&F in repair SS Grating of size 150 mm x 150 mm/100mm x 100mm fixed with white or grey cement complete all as specified.

S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

Dismantling of 75 / 100 mm dia cast iron drain pipes, jointed in cement mortar fixed on wall.

S&F 100 mm dia cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete all as specified and directed.

S&F 100 mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm dia Cast iron sand cast pipe, for soil, waste and vent in any length with or without ears, fixed on wall with MS clamp, with cement joints, complete.

S&F 100 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.

S&F 75 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.

S&F 100 mm dia bore cast iron branch piece single, equal or unequal, ordinary or inverted (Spigot or socketed type) or parallel branches with oval access door complete.

S&F cast iron vent cowl 100 mm bore dia

S&F cast iron vent cowl 75 mm bore dia

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or stone walls to be finished even and smooth (without using extra cement) complete all as specified and directed .

M&L for 15 mm thick rendering in cement mortar 1:4 on stone or concrete surfaces of wall, incl mixing water proofing compound as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed. Note - WPC will be measured & paid separately.

M & L for cement plaster 5 mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of Distemper oil emulsion over a coat of primer over and including cement base wall cair Putty on wall surfaces complete.

M&L for preparation of new plastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete.

M & L for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

All as per item No 77 above but on ceiling surfaces complete all as specified and directed.

M & L for preparation of old distempered/ decorated surfaces incl washing, rubbing down, stopping, brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of oil bound distemper on walls complete all as specified and directed.

M&L for preparation of old decorated external surfaces of walls and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and directed.

M & L for 15 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:6 complete.

Labour only for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, Including 75 to 110 mm CP waste coupling, PVC flexible waste pipe complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 31" x 36" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete. Make:- Blue star, Prayag, Nirali.

M&L for plan cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, (Avg 50 mm thickness) in roof for padding to achieve the 1:40 slope complete all as specified and as directed.

M&L for screed bed 10 mm thick on concrete surface in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed Note:- WPC will be measured & Paid separately

Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and as directed.

Taking down carefully (copper/aluminium) unserviceable point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions separately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings , street light , flood LED lights etc all as specified and directed.

Material & Labour for point wiring for One Light point /Fan point controlled by one switch with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing capping of suitable size as per IS with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes/concealed of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge Make of wire: L&T/RR Kabel/Finolex Make of PVC Capping: Finolex/Precision/Prince Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

All as per Item No 91 but for one 3 pin socket outlet 5Amps on the same board with other switches

All as per Item No 91 but for one 3 pin 5 Amp socket out let controlled by one switch on independent board

All as per Item No 91 but for one bell /Buzzer point controlled by one bell push 5 amp on the same board with other switches or independent

All as per Item No 91 but for one light point controlled by two 2-way switch with cable 1.5 sqmm

Material & Labour for point wiring for one light point /Fan point controlled by one switch with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC concealed conduit of suitable as per IS with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes/concealed of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge. Make of wire: L&T/RR Kabel/Finolex Make of PVC Conduit: Finolex/Precision/Prince Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

All as per Item No 96 but for one 3 pin socket outlet 5Amps on the same board with other switches

All as per Item No 96 but for one 3 pin 5 Amp socket out let controlled by one switch on independent board

Material & Labour for point wiring for power point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC concealed conduit of suitable as per IS with all accessories suitable for modular type fitment including provision for fixing of modular flush/concealed boxes of suitable size and thickness as per IS complete alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge Make of wire: L&T/RR Kabel/Finolex Make of PVC Conduit: Finolex/Precision/Prince Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

All as per item No 99 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as continuous earth wire connected to common earth dolly. Make of wire : L&T/RR Kabel/Finolex

M&L for Ceiling rose ceiling rose , 2 to 3 terminal PVC/ polycarbonate , isolated body type suitable for AC 230 volts Make : Anchor/Havells/SSK

M & L for Switch piano flush type single pole, one way 5 Amp 230 V Make : Anchor/Havells/SSK

M & L for Socket outlet 2 in 1, 3 pin, 5A Make : Anchor/Havells/SSK

M & L for Switch piano flush type single pole, one way 15 Amp. Make : Anchor/Havells/SSK

M & L for Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type Make : Anchor/Havells/SSK

M & L for Switch socket combination 2 in 1 , 3 pin, 5 and 15 amp flush type universal Make : Anchor/Havells/SSK

M & L for Switch socket combination 2 in 1 5A flush type Make : Anchor/Havells/SSK

Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and as directed Make : Anchor/Havells/SSK

M & L for switch Piano type 2 way 5 amp 230 volts Make : Anchor/Havells/SSK

M & L for Bell push 5 Amp 230 volts Make : Anchor/ Havells/SSK

M & L for Bell AC 230 Volts, single pole Make : Anchor/Havells/SSK

M & L for module cover plate with frame for following modules Make : Legrand/C&S Electric/Havells

(a) 1 module

(b) 2 module

(c) 3 module

(d) 4 module

(e) 6 module

(f) 8 module

M & L for Modular metal Flush box as per site requirement. Make : Legrand/C&S Electric/Havells

(a) 1/2 module

(b) 3 module

(b) 4 module

(d) 6/8 module

M & L for modular switch 1 way 6 Amp 1 Module Make :- Legrand Arteor series Cat Part No :-573400 /Anchor/Havells

M & L for Modular switch 2 way 6A , 1 Module Make :- Legrand Arteor series Cat Part No :-573402 /Anchor/Havells

M & L for Modular Switch 1 way 16/20 Amp 1 Module ,Make :- Legrand Arteor series Cat Part No :-573410 /Anchor/Havells

M &L for Modular Socket 6A 2/3 Pin universal 2 module , Make :- Legrand Arteor series Cat Part No :-573470 /Anchor/Havells

M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module , Make :- Legrand Arteor series Cat Part No :-573471 /Anchor/Havells

M &L for Modular fan step regulator 100 watt 2 module , Make :- Legrand Arteor series Cat Part No :-573416 /Anchor/Havells

M & L for Modular Bell push 6A1 way, 1 Module , Make :- Legrand Arteor series Cat Part No :-573413 /Anchor/Havells

Supply and fix in repair of Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete. Make : Legrand/C&S Electric/Havells

Supply and fix in repair of Bell musical type AC 230 Volts, as directed including connecting complete. Make - Anchor, Legrand, Cona

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 21 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engr –in-charge. Make :--Philips cat part no. BN O21C LED120S PSU CDL/NW GR(6500K) or equivalent in Havells / Wipro

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engr –in-charge. Make :-Philips cat part no. BN O21LED10S(6500K) or equivalent in Havells / Wipro

S & F Decorative wall mounting light fitting, SS finish fixture with opal glass diffuser suitable for 10W LED Ball lamp including 10watt B22 cool day light LED ball lamp complete with fixing arrangement duly internally pre-wired, fixed in position & connecting complete all as specified and directed by Engr –in-charge. Make :- Havells cat part No LHJE01106499 or equivalent in Philips/Wipro

Supply and fix in repair LED 12 W Porch light along with necessary fixing arrangement all as specified and directed by Engr-in-charge all as specified and directed. Make: Havells cat part No LHEOFJP7CUZ1W012/Wipro, Cat Part No P15127 or equivalent in Philips/CG

Supply and fix in repair 35W LED building security light luminaire complete with pressure die cast aluminium housing and prismatic poly carbonate cover to ensure better uniformity of light distribution fixed on bldg. wall surface including provision of GI pipe bracket complete with clamps, nuts , bolts and washers and making good the disturbed surface of wall complete all as specified and directed. by Engr in charge. Make :Philips model No BRPO5O LED O36 CW R1 MF PC S1 PSU GR or equivalent in Havells / Wipro

Supply and fix in repair LED lamp 5 watt cap complete all as specified and directed Make :- Wipro TEJAS cat part No :- N55001 or equivalent in Philips, Havells

Taking down carefully (copper/aluminium ) submain wiring complete of any type (batten/surface conduit or concealed ) for socket point or power point complete with all fittings such as switches sockets pendants etc complete and making good disturbed surface of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/colour washing to match with the existing surface complete all as specified and directed

M&L Sub main wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge of the following sizes of cables. .

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 4sqmm copper cable & 1 run of 4.0sqmm copper cable earth wire in and including 20mm PVC casing capping shall be measured as one unit

Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire Note :2runs of 6sqmm copper cable & 1 run of 6.0 sqmm copper cable earth wire in and including 25mm PVC casing capping shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed. Make : Legrand Model: IP 54 IK 09 507641 Ekinox or equivalent in L & T (Hager) / Schnieder (Multi-9).

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts with in built MCCB 160 Amps, 10 KA, 01 No.,2neutral bar and 2 earth bar IP 54 protection, cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounting to wall, including provision of new MCB SP 6 to 32 Am,10KA -12 nos alongwith TPN DB complete all as specified and directed. Make : Legrand Model: No.507750 Ekinox DPX 160MCCB IK-09 or equivalent in L & T (Hager) / Schnieder (Multi-9).

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to63)Amps capacity IP 20 complete all as specified and directed Make - Legrand/Siemens/ L & T (Hager)

M&L for MCB triple pole & neutral 415 volt C curve 10 KA, 63Amps capacity IP 20 complete all as specified and directed Make - Legrand/Siemens/ L & T (Hager)

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed Make - Legrand/Siemens/L & T (Hager)

Supply and fix wall mounted Cabinets Made with Metal Textured polyester coating providing excellent corrosion and scratch resistance front door Openable along with inbuilt accessories made as per IP- 55 standard along with (a) inbuilt one two pole contactor of 25 Amp rating make BCH Cat part No :- CPG 216, (b) one nos 32 Amp two pole MCBs (c) one No 32 amp single pole MCB, the box size will be 200 mm x 200mm x 120 mm ( H X W X D) BCH cat No :- BIL - 50000 (d)Digital timer clock type 110-240 VAC 1 C/O Base/DIN 25 ON/OFF Make L & T , cat Part No :- 67DDTO complete all as specified and as directed by Engr-in-Charge. Make : BCH or equivalent in GE / Klinkmann / Wipro

M & L for earthing with SAFE EARTHING ELECTRODE (S.E.E) conforming to IS :3043-1987 with zinc coated earthing electrode with coating thickness of 100 microns using pipe in pipe technology method with 3 Mtr long, 42mm inner dia and 76mm outer dia GI rod connected with and including 25 mm x 3 mm size GI strip upto 7.5 m, fixing of electrode by boring 150 mm dia hole up to 3.30 meter depth in any type of soil with mechanical apparatus, returning filling with back fill compound(BFC) 25*2 KG compound bags including GI tubing 40 mm dia with necessary fittings light grade as protection to GI strip complete with FRP earthing protection chamber along of size 420 mm x 420 mm at top, 340 mm x 340 mm at bottom, height 210 mm with FRP chamber cover and including FRP Earthing result display board of size 254 mm x 380 mm made out of plastic material showing the information replated to type of earthing, earthing result, due date of testing etc along with fixing stand 610 mm height made of angle iron as per manufactures instruction and as specified and directed by Engr - in- charge including taking out old earthing. Make:- POWERTRAC McML Earthing solution / Ashlock

S & F bulkhead fitting 10watt made die cast aluminium housing with complete assembly and PC opal diffuser suitable for surface/wall mounted dust and water resistant complete all as specified and as directed . Make: Wipro cat part no. LW07-141-XXX-57-XX /Havells/Philips

Supply and fix danger notice plate made of 1.6 mm thick mild steel sheet , vitreous enamelled white, of size 20 x 15cm with figures, letter, and conventional skull bones in signal red colour and fixed with mild steel clamps made of 25 x 3 mm including MS flat iron, nuts, bolts and washers etc for LT poles / Panels / Sub station etc with voltage and danger indicated in Hindi and English complete all as specified and directed.

S & F in repair poly propylene plastic louver shutter(flp type) of size 350x350mm ,circulating opening 310mm dia fixed on wall for exhaust fan with screw complete all as specified and directed. Make: OMAX plastic/sintex or equivalent make as approved by the GE

Supply and fix in repair plastic louvers for exhaust fan along with connected accessories suitable for 200 to 300mm sweep exhaust fan complete all as specified and as directed by Engr-in-charge.

MAYUR ENTERPRISE

Raj brothers

JAMNAGAR ELECTRIC AND MACHINERY CO