Under CDP-3 Repair, Renovation and New Construction work of Jilla Panchayat Dahod Ta. Dahod Dist.Dahod.

Name of Work :- Under CDP-3 Repair, Renovation and New Construction work

of Jilla Panchayat Dahod Ta. Dahod Dist. Dahod.

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

1 Removing dry or oil bound distemper by a washing and scraping and sand 14614.70 Sq.m. 11.82

papering the wall surface smooth including necessary repairs to scratches

2 Applying priming coat over wall / new steel and other surface after and including 14920.46 Sq.m. 35.91

preparing the surface by throughly cleaning, oil, grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

3 Applying two coats of putty & two coats of primer of approved brand and 15829.49 Sq.m. 40.50

manufacture of new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

4 Finishing wall with weather proof exterior emulsion paint on wall surface (two 4556.55 Sq.m. 121.56

coats) to give an required shape even shade after thoroughly brushing surface to

remove all dirt, dust and remains of loose powdered materials etc. complete.

5 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 243.85 Cum 124.61

of useful materials and disposing the excavated stuff for all lead and lift (A)

Loose or soft soil.

6 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 130.67 Cum 159.30

of useful materials and disposing the excavated stuff for all lead and lift (B)

Dense or Hard soil

7 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 17.50 Cum 272.60

of useful materials and disposing the excavated stuff for all lead and lift (C) Hard

8 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 9.11 Cum 3617.44

graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth.

9 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 31.74 Cum 3903.39

4- graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base or columns and Mass concrete

10 Filling available excavated earth (excluding rock) in trenches plinth side of 305.22 Cum 136.11

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

11 Filling in plinth with sand under floors including watering, ramming, consolidating 79.07 Cum 415.66

and dressing complete.

12 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm 187.59 Cum 270.37

thickness including watering, ramming and consolidating etc. complete.

13 Providing formwork of ordinary timber planking so as to give a rough finish 639.05 Sq.m. 186.24

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain concrete work in (A) Foundations

Footings bases of columns etc. and mass concrete.

14 Removing and scraping of old deteriorated plaster of any thickness from wall / 268.80 Sq.m. 20.16

R.C.C member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

15 Providing and laying controlled cement concrete M-250 and curing complete 60.32 Cum 4590.29

excluding the cost of formwork and reinforcement for reinforced concrete work in

(D) Columns, pillars posts and struts, upto floor two level.

16 Extra for additional lift of concrete for all R.C.C. work above floor two level 235.40 Cum 39.68

excluding cost of reinforcement.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

17 Providing formwork of ordinary timber planking so as to give a rough finish 706.08 Sq.m. 323.39

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain concrete work in (G) Columns

Pillars Posts and struts. (1) Square Rectangular Polygonal in plan.

18 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 71932.22 Kg. 76.52

including bending, binding and placing in position complete upto all floor level.

19 Extra for additional lift of reinforcing steel for all R.C.C. work above floor two 34295.01 Kg. 1.06

20 Providing and applying anticorrosive treatment with polymer base materials to 71932.22 Sq.m. 4.13

the steel reinforcement including descaling the dust and applying the preventive

coating of approved make (for the R.C.C. structures near coastal area only) etc.

21 S.S. Railing pipe 50 mm x 16 G ASIS 304 grade 28.80 Rmt. 1004.24

22 S.S. Railing pipe 16 mm x 16 G ASIS 304 grade 54.00 Rmt. 366.10

23 Marble Slab Polished granite stone 20 to 25mm thick colour. 242.68 Sq.m. 3644.07

24 Providing 20mm thick sand faced cement plaster on walls upto height 10 1144.29 Sq.m. 350.48

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

25 Chicken wire mesh 16 x 24. 1215.21 Sq.m. 182.20

26 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 87.75 Cum 636.06

useful materials and disposing off the excavated stuff upto 50 Meter lead. (E)

27 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and 284.85 Cum 660.16

stacking of useful materials and disposing off the excavated stuff upto 50 meter

lead. (E) Hard Rock

28 Providing formwork of ordinary timber planking so as to give a rough finish 200.00 Sq.m. 247.20

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain concrete work in (C) Vertical

surface such as walls (any thickness) partitions and the like including attached

buttresses & string course & the like.

29 Providing formwork of ordinary timber planking so as to give a rough finish 841.63 Sq.m. 270.90

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work in (B) Flat

surfaces such as soffits of suspended floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

30 Providing 10mm thick cement plaster in single coat on brick/concrete walls for 296.00 Sq.m. 149.18

interior plastering upto floor two level and finished even and smooth in cement

mortar 1:3 (1 cement : 3 sand)

31 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 500.00 Rmt. 826.12

U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other

end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160mm diameter x 210mm length x 196mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

32 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 500.00 Rmt. 888.90

U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain and

other end socketed with rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110mm diameter x 149mm length x 145mm high at every 2000mm center

to center or shall be concealed in wall as directed including necessary fitting

such as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

33 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 5.00 Each 10933.41

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement : 2-Coarse sand :4-stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement : 5 Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter

34 Constructing brick masonry chamber for underground C.I. Inspection chamber 4.00 Each 7109.35

and bends with bricks having crushing strength not less than 35 Kg/Cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (iii) Inside dimensions 600mm

x 850 mm and 450mm deep for pipe lines with three or more inlets.

35 Providing and laying controlled cement concrete M-250 and curing complete 16.18 Cum 2975.72

excluding the cost of form work and reinforcement for reinforced concrete work

in Foundations, footings bases of columns and mass concrete.

36 Providing and laying controlled cement concrete M-250 and curing complete 160.71 Cum 4205.16

excluding the cost of form work and reinforcement for reinforced concrete work

in Foundations, footings bases of columns and mass concrete.

37 Filling in foundation and plinth with brick bats, chhara in layers of 20cm. 77.99 Cum 619.28

thickness including watering, ramming and consolidating etc. complete.

38 Anti-Termite System : Providing and laying of permanent piping technology anti- 254.56 Sq.m. 133.00

termite treatment before flooring work by installing LLDP (Low linear density

polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having working pressure of

2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP

pipe shall be installed at the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr.

c/c distance (adjusted as per building layout) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level, entering into

a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction boxes & test every junction

during injecting chemicals for termite control treatment.

The anti termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of

water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes dully approved by

Engineer-in-Charge with bond of 5 year warranty.(i)Anti Termite chemical

injected area (Chemical injecting incl. labour cost)

39 Providing and laying controlled cement concrete M-250 and curing complete 231.97 Cum 4485.93

excluding the cost of form work and reinforcement for reinforced concrete work

in Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

40 Providing formwork of ordinary timber planking so as to give a rough finish 895.32 Sq.m. 209.95

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain concrete work in (H) (1) Sides and

soffits of Beams, Beam Haunchings cantilevers Girders Bressumers and Lintels

not exceeding 1 M. in depth.

41 Providing formwork of ordinary timber planking so as to give a rough finish 54.00 Sq.m. 264.13

including centering shuttering strutting and propping etc. height of propping and

centering below supporting floor to ceiling not exceeding 4 M. and removal of the

same for in situ reinforced concrete and plain concrete work in (M) Staircase

with sloping or stepped soffits including risers and stringers excluding landing.

42 Providing and laying brick work using common burnt clay building bricks having 197.40 Cum 4299.25

crushing strength not less than 35 Kg./Sq.cm. in foundation and plinth in cement

mortar 1:5 (1 cement : 5 fine sand) (C) Fly Ash bricks including the cost of all

materials and labour charges etc. complete.

43 Extra for brick work in super structure above plinth level upto floor two level (C) 197.40 Cum 285.57

Fly Ash Bricks.

44 Providing and laying half brick work using common burnt clay building bricks 436.23 Sq.m. 638.14

having crushing strength not less than 35 Kg/Sq.cm in cement mortar 1:4 (1

cement : 4 coarse sand) in foundation and plinth (C) Fly Ash bricks including the

cost of all materials and labour charges etc. complete.

45 Extra for half brick work in super structure above plinth level upto floor two level 436.23 Cum 55.17

(C) Fly Ash Bricks.

46 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 2.93 Cum 3952.91

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

47 Providing 10mm thick cement plaster in single coat on brick/concrete walls for 2777.57 Sq.m. 134.10

interior plastering upto floor two level and finished even and smooth in cement

mortar 1:4 (1 cement : 4 sand)

48 Providing 15mm thick cement plaster in single coat on rough (similar) side of 1909.71 Sq.m. 177.78

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in cement mortar 1:4 (1-cement :4-sand)

49 Providing and fixing window having extruded aluminum colour anodized section 75.00 Sq.m. 2119.14

frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m,

vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@

kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with

mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc. complete for window.

50 Extra for using ground glass (frosted or obscured on one side) instead of plain 75.00 Sq.m. 37.91

51 Providing and fixing standard extruded of alluminium section of size 63.50 x 75.00 Sq.m. 1815.14

38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour powder coated alluminium

frame with 5 mm thick transparent bronze colour tinted float glass as details etc.

complete for fix window.

52 Providing and fixing standard extruded of alluminium section of size 63 x 38.10 x 4.68 Sq.m. 1163.92

1.2 mm @ Wt. 0.643 Kg / Rmt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc. complete for Ventilation.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

53 Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM 15.12 Sq.m. 2214.00

PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of

gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails. M.S.

frame shall have a coat of steel primer of approved makde and manufactures.

M.S frame covered with 5mm thick heat moulded prelim PVC ‘C’ channel of size

30mm thickness, 70 mm width of which 50mm shall be flat and 20mm shall be

tapered in 45 degree Angle on either side forming stiles and 5mm thick, 95mm

wide pream PVC sheet out of which 75mm shall be flat and 20mm shall be

tapered in 45 degree on the inner side of form top and bottom rail and 115mm

wide prelim PVC sheet out of which 75nmm shall be flat and 20mm shall be

tapered on both side to form lock rail, Top, bottom and lock rails shall be

provided either side of the panel. 10mm (5mm x 2) thick 20mm wide cross PVC

sheet shall be provided as gap insert for top rail and bottom rails.

Panelling of 5mm thick both side prelim PVC sheet to be fitted in the M.S. frame

welded, sealed to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm

wide PVC sheet beading on inner side, and joined together with solvent cement

adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the

interior side of the ‘C” channel using PVC solvent adhesive etc. complete as per

direction of Engineering in charge, manufacture’s specification and drawing.

54 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory 31.50 Sq.m. 5478.89

windows including Indian teak wood frames 12 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete. (ii) Fully Panelled.

55 Fixing Metallic tower bolts of sizes with necessary screws etc. complete (Tower 25.00 Each 52.15

bolts and screws to be paid under separate items)

56 Fixing metallic mortice night latches with necessary screws including making 25.00 Each 98.55

necessary holes in wooden door shutter etc. complete (Mortice night latches and

screw to be paid under separate items)

57 Fixing metallic floor door stoppers of sizes with rubber cushion screws etc. to 25.00 Each 4.41

suit shutter thickness complete (Floor door stopper with rubber cushion and

screws to be paid under separate items)

58 Fixing metallic door handles or knobs for mortice locks with necessary screws 50.00 Each 3.90

etc. complete (Door handles / knobs and screws to be paid separately)

59 Providing and fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge 76.44 Sq.m. 679.12

designation 85 G. with wire of dia.0.56 mm to windows and celevating windows

including 60 x 20mm beading of teak wood.

60 Providing and fixing M.S. grills of required pattern to wooden frames of windows 1528.80 Kg. 109.22

etc. with M.S. flats at required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws (A) Plain Grill.

61 Steel work, welded in built up sections framed work including cutting, hoisting, 4049.10 Kg. 93.54

fixing in position and applying a priming coat of red lead paint. (D) In trusses and

trussed purlins, upto 25 M. span and 15 M. overall height.

62 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 209.04 Sq.m. 1420.54

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finished with flush

pointing & cleaning the surface etc. complete for light shade.

63 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 24.60 Sq.m. 1458.33

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finished with flush

pointing & cleaning the surface etc. complete for anti skid.

64 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm 96.60 Sq.m. 1508.58

/ 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

65 Providing and laying marble stone slab flooring over 20mm (average)base of 86.40 Sq.m. 2267.88

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 -

coarse sand) laid and jointed with gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick

66 Labour charges half round edge for granite. 285.30 Sq.m. 85.00

67 Providing and laying Vitrified tiles 8 to 10 mm thick, in skirting risers of steps and 82.61 Sq.m. 1576.63

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed

with white cement slurry.

68 Providing and laying polished Kota stone slab flooring over 20mm (average) 546.02 Sq.m. 1009.30

thick base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

69 Wall painting two coats with plastic emulsion paint of approved brand and 3583.49 Sq.m. 83.98

manufacture on undecorated wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

70 Painting two coats (excluding priming coat) on new steel and other metal surface 334.56 Sq.m. 68.47

with synthetic enamel paint, brushing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matter.

71 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 498.76 Sq.m. 1657.57

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC. for the best

thermal Insulation. The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone / Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 x 595 mm to be laid on

true horizontal level suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get required length and size of 24 x

38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24 x 28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to centre to form

agrid of 1200 x 600mm and secondary cross ’T’ of

length 600mm and size 24 x 28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200 x 600mm panel to form grid of size 600 x

600mm resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24 x 24 x 3000mm made of 0.40mm thick (minimum) sheet

with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine Fissured / Cosmos /

Spintone) in the grid including, cutting /making opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size

x 35 x 1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners,

4mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x

0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester

baked paint, for all heights, as per specifications, drawings and as directed by

engineer-in-charge. Note :- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for exposed frames /

opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling

tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured / Spintone /

Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity.

0.043° w/m KC for the best thermal insulation.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

72 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 254.56 Sq.m. 771.98

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

73 Providing and fixing water closet squatting pan (Indian type W.C. pan) size 2.00 Each 1009.10

580mm (Earthwork, bed concrete, foot rest and trap to be measured and paid

for separately) (A) Vitreous China. (I) Long pattern = White colour

74 Providing and fixing wash down water closet (European type, W.C. Pan) with 3.00 Each 1343.38

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1

(1-Cement : 1-fine sand) (Seal and cover to be measured and paid for

separately) (A) vitreous china pattern (i) in white colour.

75 Providing and fixing 100mm size P or S trap for water closet squatting pan 5.00 Each 350.48

including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1-

Cement : 1-Fine sand) (A) Vitreous China.

76 Providing and fixing in cement mortar 1:3 (1-Cement : 3-coarse sand), a pair of 5.00 Each 118.95

white vitreous china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet.

77 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or 5.00 Each 2346.92

mild brackets, complete with fittings such as lead valve less syphon, 15mm

nominal size brass ball valve with polythene float, C.P. brass handle unions and

couplings for connections, with inlet, outlet and overflow pipes, 40mm dia.

porcelain enamelled flush bend including cutting holes in walls and making good

the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately) (A) Vitreous China (I) In white colour.

78 Providing and fixing in position with clamps etc. 32mm nominal internal diameter 20.00 Each 344.07

galvanised steel tube flush pipe for high level flushing cistern including

connecting the flush pipe with cistern and closet and making good the walls and

79 Providing and fixing G.I. inlet connection for flush pipe with W.C. pan. 5.00 Each 41.31

80 Providing and fixing plastic seat and cover for wash down water closer with C.P. 5.00 Each 288.45

brass hinges and rubber buffers. (B) Black plastic seal and cover.

81 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 4.00 Each 1471.33

brackets painted white including cutting holes and making good the same but

excluding fittings. (A) Vitreous china (ii) Flat Back washbasin 550 mm x 400mm

size. (i) In white colour.

82 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 2.00 Each 2303.62

including cutting holes in walls and making good the same but excluding fittings.

(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size.

83 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. 6.00 Each 88.94

84 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. 10.00 Each 36.61

85 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 2.00 Each 279.37

100mm dia. each

86 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass 5.00 Each 850.90

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

87 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed 6.00 Each 610.32

to wooden plugs with C.P. brass screws. (B) 600 mm x 20 mm size.

88 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and 6.00 Each 553.66

guard rail complete mixed to wooden plug with C.P. brass screws.

89 Providing and fixing toilet paper holder. (A) C.P. Brass 5.00 Each 423.75

90 Providing and fixing screw down bib taps of following size (A) Brass screw down 6.00 Each 212.68

bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge for all

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

91 Providing and fixing pillar tap, capstan head screw down high pressure with 5.00 Each 351.18

screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.

92 Providing and fixing brass screw down stop tap. (B) 20mm dia. as directed by 10.00 Each 221.59

Engineer in charge.

93 Providing and fixing Gun metal check or non return full way wheel valve. (B) 20 3.00 Each 201.80

94 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 2.00 Each 416.47

95 Providing and fixing chromium plated brass half turn flush cock of approved 2.00 Each 252.26

quality including fixing in pipe line etc. complete. (i) 20mm dia. as directed by

Engineer in charge.

96 Providing and fixing chromium plated brass half turn flush cock of approved 2.00 Each 261.16

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by

Engineer in charge.

97 Providing and fixing Urinal of approved quality including connection with trap and 2.00 Each 1657.57

with integral longitudinal flush pipe. (A) Squatting plate pattern white

earthenware 550mm x 300mm.

98 Providing and fixing Rubber plug for sink or wash basin. 7.00 Each 16.98

99 Providing and fixing chromium plated, bottle trap with necessary couplings of 5.00 Each 292.87

approved quality for wash basin.

100 Providing and fixing ball cock of approved quality as directed. (A) Copper metal 5.00 Each 131.57

101 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 2.00 Each 948.68

less than 35 Kg.

102 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 10.00 Each 100.90

103 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 100.00 Rmt. 206.73

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (F) 20 mm dia.

104 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 100.00 Rmt. 251.31

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (B) 25 mm dia.

105 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 100.00 Rmt. 334.89

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (D) 32 mm dia.

106 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 100.00 Rmt. 443.29

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (E) 40 mm dia.

107 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. U.P.V.C 100.00 Rmt. 71.93

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

108 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. U.P.V.C 100.00 Rmt. 90.93

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

109 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. U.P.V.C 100.00 Rmt. 117.97

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

110 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. U.P.V.C 100.00 Rmt. 146.65

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

111 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 10.00 Each 594.29

with jali of the following nominal diameter of self cleaning design with C.I.

screwed down or hinged grating including the cost of cutting and making good

112 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75mm diameter 10.00 Each 582.44

with jali of the following nominal diameter of self cleaning design with C.I.

screwed down or hinged grating including the cost of cutting and making good

113 Providing and laying (two level or slopes) and jointing with stiff mixture of cement 50.00 Rmt. 223.24

mortar in proportion 1:1 salt glazed stone ware pipes following nominal internal

diametre including testing of pipes and joints etc. complete. (A) 100mm dia.

114 Providing and laying (two level or slopes) and jointing with stiff mixture of cement 50.00 Rmt. 314.19

mortar in proportion 1:1 salt glazed stone ware pipes following nominal internal

diametre including testing of pipes and joints etc. complete. (B) 150mm dia.

115 Providing and laying cement concrete 1:5:10 (1-Cement : 5 fine sand :10 graded 50.00 Rmt. 125.90

stone aggregate 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete. (A) 100 mm

dia. (112 mm Ave.bed thickness)

116 Providing and laying cement concrete 1:5:10 (1-Cement : 5 fine sand :10 graded 50.00 Rmt. 211.59

stone aggregate 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete.(B) 150mm dia.

(166mm avg. bed thickness)

117 Extra over item 24.1 for providing salt glazed stoneware fittings. (i) Bends of 5.00 Each 59.78

required degree (any radious) of following nominal diameters. (A) 100mm dia.

118 Extra over item 24.1 for providing salt glazed stoneware fittings. (i) Bends of 5.00 Each 63.16

required degree (any radious) of following nominal diameters. (B) 150mm dia.

119 Extra over item 24.1 for providing salt glazed stoneware fittings. (ii) Taper bend 5.00 Each 73.59

of required degree of following internal diameters. (A) 100mm x 150mm

120 Extra over item 24.1 for providing salt glazed stoneware fittings. (iii) Single 5.00 Each 67.15

junction of required angle of following internal diametrs. (A) 100mm.

121 Extra over item 24.1 for providing salt glazed stoneware fittings. (iii) Single 5.00 Each 119.23

junction of required angle of following internal diametrs. (B) 150mm.

122 Providing and laying jointing and pointing with stiff mixture of cement mortar 1:1 100.00 Rmt. 185.20

(1-cement : 1 fine sand) 150 mm internal diameter salt glazed stoneware half

round channels.

123 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber 10.00 No. 1234.57

and water tight C.I. cover with frame of 300mm x 300 mm size (inside) with

standard weight (i) Square mouth traps. (B) 150mm x 100mm size P or R type

124 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 100.00 Rmt. 254.59

non-pressure pipes I.S. class NP-2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (B)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

125 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 1.00 Each 19158.05

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3 coarse sand : 6 brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement : 2 coarse sand : 4 stone aggregate 20mm nominal size) finished

smooth complete including curing and fasting (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35 Kg. / Sq.cm. in Cement Mortar 1:5 (1

Cement : 5 coarse sand) (2) B type depth 1.50 Metre for 150mm diameter

126 (A) With 230mm thick walls of brick masonry using brick having crushing 2.00 Each 29993.85

strength not less than 35 Kg./Sq.cm. in Cement Mortar 1:5 (1 Cement : 5 Coarse

sand) (4) D type depth 3.15 Metre for 150mm diameter sewer.

127 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and 2.00 Each 205.60

painting with two coats of Anti-corrosive paint etc. complete.

128 Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap 2.00 Each 492.22

(Standard pattern) the weight of cover to be not less 4.53 Kg.)

129 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 Each 3624.51

and bends with bricks having crushing strength not less than 35Kg/cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (ii) Inside dimensions 500mm

x 700 mm and 450mm deep for pipe line with one or two inlets.

130 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling 2.00 Each 3252.82

brickbats with dry masonry work at top for 45cm. height including covering the

top with stone including providing vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

131 Providing erecting and fixing double coated PVC (I.S.I.) mark water tank of 5000.00 Litre 3.18

required capacity each with all necessary fittings & connection etc. comp on

Electrical Items

132 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 58.00 Pt. 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected

on PVC / Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ ceiling complete, Cat-III [1-2-1]

133 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 34.00 Pt. 674.68

are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic / Wooden box,

single mounting base frame covered with textured / metallic / white front plate

modules erected on/ in wall / ceiling as per pipe erected with necessary ceiling

rose / H.D. Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling complete, Cat-III [1-2-2]

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

134 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 3.00 Pt. 603.98

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic / Wooden

box, single mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected with necessary

batten/angle holder or ceiling rose or H.D. Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete, Cat-III [1-2-5]

135 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of 18.00 Pt. 745.38

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below

type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC/ Metallic / Wooden box covered with appropriate front plate modules

erected on/ in wall/ ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete, Cat-III [1-2-3]

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switch 6.00 Pt. 510.05

board / mcb db board, (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat-III

136 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 17.00 Pt. 257.55

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on/ in wall/

ceiling with following type accessories, Cat-III [1-2-4]

137 Decorative call bell Ting-tong box type 250 volts complete erected [1-6-12] 2.00 Nos. 71.71

138 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 70.00 Mtr. 33.33

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps with following dia

of pipes, in approved manner as directed (b) 25 mm [1-3-2]

139 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 350.00 Mtr. 82.82

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.mm [1-4-

(A) With medium class Rigid PVC pipe and accessories, (a) 2 wire 1.5 sq.mm 25.00 Mtr. 62.62

140 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 70.00 Mtr. 147.46

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq.mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (a) with medium class

Rigid PVC pipe and accessories, (b) 2 wire 6 sq. mm [1-4-2-a-b]

141 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade 60.00 Mtr. 46.46

ISI marked copper wires of following size to be erected as directed. (e)

Sq.mm 3 core round PVC sheathed [1-4-5]

142 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 20.00 Nos. 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box confirming to IS 8828/1996 with ISI Mark, Cat-III [3-10-1-B]

143 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 12.00 Nos. 270.68

and having breaking capacity 10 KA to be erected in existing box confirming to

IS 8828/ 1996 with ISI Mark, Cat-III [3-10-1-A]

144 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 3.00 Nos. 278.76

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat.III [3-10-3]

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

145 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 3.00 Nos. 1492.78

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs. (The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing, (b)

sheet steel double door (IP-43), (iv) 12 way [3-11-5-a-b-ii]

146 Approved make ELCBs/ RCCBs conforming to IS: 12640 and having sensitivity 3.00 Nos. 2235.13

of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation

on single phase 240 V having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for following

Max. rating erected as directed (ii) 40 A DP, Cat-III [3-12-1]

147 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium 360.00 Mtr. 92.92

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (B) 2 core 6 Sq. mm [4-3-1]

148 Providing & laying approved make Double walled corrugated pipes (DWC) of 320.00 Mtr. 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting accessories

of same material at required depth in existing trench for laying of cable below

ground/ road surface for enclosing cable. (A) 50 mm outer dia [4-5-8]

149 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 300.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground. [4-5-1]

150 Providing and erecting Annealed bare Copper wire 8 to 16 SWG.[3-14-4] 7.00 kg. 794.87

151 Supplying & erecting approved make low noise decorative exhaust fan having 9.00 Nos. 1703.87

square frame ABS body with inbuilt lowers & square frame. 200mm with

RPM Cat.II [5-3-3]

152 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1.00 Nos. 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover. (A)

(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long

time necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil,

Length of pipe - 1 Mtr, Back filling compound -

1 Nos Bag of 15 Kg. [3-14-9/a]

153 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 32.00 Nos. 108.07

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box/ Heavy Duty PVC box complete erected concealed in Ceiling with necessary

finishing. [5-2-3]

154 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star 32.00 Nos. 2629.03

rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite

magnet Motor, class of insulation: B, Rust free 3 nos. Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, compitible with

electronic regulator unit for Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and

overload protection, 50 Hz, Single phase AC Supply, earthing etc. Complete as

required. [Make shall be approved by Engineer in charge] (A) 1200 mm Sweep

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

155 Supplying and erecting approved make Octagonal pole made from HR sheet 12.00 Nos. 6874.06

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm x 7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected with suitable foundation

(Included) as per details given by manufacturer considering site requirement. (C)

5 Mtr. Long 70 mm top x 130 mm bottom dia, 3 mm thickness with 200mm x

200mm x 12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J

Bolts. Approx Pole weight 46 kg [6-1-4]

156 Supplying and erecting Street light pole bracket comprising main B Class GI pipe 12.00 Nos. 491.87

of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing

of approx. 45cms length and suitable for 76.5mm / 80mm / require size of pole

top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg. with vertical plane and suitable welded stiffener reducer

and nipple with check nut complete painted with one coat.of Red oxide/ PU base

primer and two coats of Aluminium/ PU paint paint with following nos of arms. [A]

Single Arm bracket 0.5 Mtr [6-5-4-b]

157 Supplying & erecting approved make IP 55 grade Company fabricated Timer 1.00 Nos. 12399.77

Panel of following capacity for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power painted inside and outside

with hinged doors and locking arrangement consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III) with analog time switch, auto manual switch

of same make and suitable input and output Bakelite terminals and with door

earthing approved by Engineer in charge. (A) 32 Amp [6-7-6]

158 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 47.00 Nos. 535.30

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/ CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/ name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT

3000 K to 6500K, Luminaire efficacy> 85, lumens/ watt , LED driver efficiency >

85 % (fitting required LM-79 & LM-80 Certificates), (NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer incharge

may select any wattage capacity between the ranges shown) (A) Tube Light with

integral driver, (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet, Cat-III [2-

159 Supplying and erecting led lamps with following wattage capacity of 220 to 240 9.00 Nos. 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf

>= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder, (ii)

watts, Cat-III [2-15-2]

160 Supplying and erecting LED street light / Flood light fittings with High power 12.00 Nos. 4997.48

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/ name engraved or embossed 160 to 270 V, Power Factor

more than 0.95, THD < 10%, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/ watt LED driver efficiency > 85%. (fittings

required LM-79 & LM-80 certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings. The Engineer incharge may select

any wattage capacity between the ranges shown) (A) Street Light (IP-65), Surge

protection- 4KV integral and Light must have 440VAC line supply with over-

voltage protection. (ii) above 48 to 60 Watts, Cat-lll[2-16-2]

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and 2.00 Nos. 4819.72

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block. IP 65 (ii) 32-

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

161 Providing & erecting full SS Body (SS 304) Split type water cooler having 1.00 No. 61115.10

storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per

hour @ an ambient temp of 350 C.The outlet temp. of the water should drop by

150C within a hour, The water cooler should be comprising of hermetically

sealed Reciprocating compressor with R134A, fan motor, Copper Condensing

unit with company fabricated Outdoor Unit water tank surrounded by evaporating

coil, thermostats, relay etc. complete with necessary copper tube & Insulation,

M.S Chanel Stand with Painting for water tank & M.S. Powder Coated Stand for

Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for

connection. 8-13-2.

162 Supplying & erecting reverse osmosis (RO) water purification system with M.S. 1.00 No. 77891.20

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed] (D) 100 LPH with 1 phase / 3 phase Raw water pump of

500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1

No), Micron cartridge filter 20" x 2.5" (1 No), High pressure pump 500LPH @

10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO

membrane of 40 x 40 - (1No), RO pressure tube 4" x 1E - (1 No), 0 - 1200 LPH

Rotameter -(2 Nos), with Recovery Rate 50%.'8-13-6 (D)

163 Providing & erecting Deep Freezers effective and economical Solutions for safe 1.00 No. 34922.77

storage of perishable foods. The range of hard - top deep freezers Technical

Specification Gross Capacity 400 ltr., Temp. Range -18°C to -22°C, Power

Supply 230 Volts, Single phase, 50Hz, Refrigerant R134A, No of lids 2, Inner

Cabinet Pre-painted GP Steel, Puf thickness 60 x 60,Over all No of Baskets

Wheels / Legs Heavy Duty Castors.8-14-6.

i.e. Rs. Two Crore Seventy lacs Fourty Nine thousand Six hundred Seventy Five and Fifty Four paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division Panchayat (R & B) Division