State Tax Office at Petlad. (Repairing of Toilet Block, Furniture, Plumbing Work, Water Proofing, Pest Control Treatment, Door-Ventilation, Street Light and Other Misc. Works)

Name of Work: - State Tax Office at Petlad [Reparing of Toilet Block, Furniture, Plumbing work,

Water Proofing, Pest control treatment, Door- Ventilation, Street ligth and Other Misc. Work.]

Sr Clause no Page

1 Principle Approval Date and t.26/05/2025, Rs.8.25 Lacs

Amount (Attach letter)

2 Administrative Approval Date

and Amount (Attach letter )

3 Technical Approval Date and t.24.11.2025

Amount (Attach letter)

4 SOR Year 024-25

6 Tender Fee Rs. .900.oo

(As per GR- PRCH-102000-1B-

Above 10.0 Cr.- Rs 18000)

7 Earnest Money Deposit (Bid IFB 4 .6,ooo.oo

Security-I point

% of DTP amount)

8 Time Limit (Months) Section 3 41 02 (TWO) Months

9 Annual Financial Turnover Section 1 9 s.

Amount Rs. cl. 4.5.3(a)

10 Defect Liability Period (In Section 3 46 1 (ONE) YEARS

Months & includes no. of cl.

11 Free Maintenance Guarantee Section 3

Period (for Road & Bridge cl.

12 Registration/Category - 'E-2" Class & above

13 Site Possession Date Section 3 1 day of Work order#

14 Period between Program Section 3 44 15 days

U date (Days) cl.

15 Amount to be withheld for late Section 3 44 - 1 Lakh

submission of Program cl.

16 Milestone: - Section 3 53 Davs

Milestone 1 25% 15 days

(B) Milestone 2 30 days

(C) Milestone 3 75% 45 days

(D) Milestone 4 100% 60 days

case of LA/FRA is in progress give likely date.

17 Price Adjustment Components Section 4 66 Input

24 index/ rice*

Labour, PL Section 4 66 PL=22.530/0

(B) Cement, Pc Section 4 66 -

(C) Steel, Ps Section 4 67 Ps=OO.OOO/0

(D) Bitumen, Pb Section 4 67 00.00%

(E) POL, Pf Section 4

(F) Plant and Machinery Spares Pp Section 4 68 Pp=08.540/0

Other Materials, Pm Section 4

18 Amount to be withheld for Section 3 56 Lakhs

failing to supply "as built" cl.

19 Percentage Rate Contract Section 7 78 Percentage Rate Contract

(upto INR 50 Cr. )/ Item Rate

Contract (above INR 50 cr.)

*Input index/price for each component on 28 days preceding the date of opening of technical

bid shall be noted.

This is to certify

that the contract document

prepared for the work State Tax Office at Petlad [Reparing of Toilet Block,

Furniture, Plumbing work, Water Proofing, Pest control treatment, Door-

Ventilation, Street ligth and Other Misc. Work.] is based on the Standard Bidding

Document Procurement of Civil Works published by R&B department letter No.

No further modification and alteration in this standard format has been made

Deputy ecutive Engineer Executiv Engineer

R&B Sub Division R&B Division

Khambhat Anand.

Name of Work :- State Tax Office at Petlad [Reparing of Toilet Block, Furniture, Plumbing work,

Water Proofing, Pest control treatment, Door- Ventilation, Street ligth and Other Misc.Work.l

INDEX OF SPECIFICA TION

Item No. Specification

as per Item Description Applicable specification Booklet

Tender Attached

1. Providing and fixing Impulse Blackout Roller Blinds with As per separate sheet attached Separate

fabric of 0.53mm thickness and top channel of non- herewith sheet

rusting aluminium alloy with 1.25 mm thickness and

bottom channel of 1.50 mm thickness and 21 mm

diameter. Tilt channel of ABS plastic with 1.50 mm

polyester cord with 4.50 mm balls with stop lock

arrangement including all necessary fixture, fasteners,

fittings, labour material machinery etc. complete of

premium quality and as selected and directed by

Engineer-in-charge.

2. Providing and supplying High Back Premium executive As per separate sheet attached Separate

Revolving Chair Sigma chrome Base with Knee Tilt herewith sheet

Synchro Mechanism with any Position back Lock, Seat

and Back Made from High Density U -

Aluminium Die Casted with Cushion Pad including all

materials and labour etc. complete as directed by

Engineer in charge. Size : max. Height: 1290 mm to Min.

1170 mm, Seat: 530 mm x 520 mm, back 740 mm x

mm. (Model Zoro 451)

3. Providing and supplying Wooden Table having 40 mm As per separate sheet attached Separate

thick top overall thickness made from 18 mm thick MR herewith sheet

grade plywood, top and side finish with 1 mm thick

laminate both side (inside and outside) to be laminated

and top back side 0.8 mm balancing laminate including

teak wood border patty of size 40 mm x 12 mm with

appron to be made from 18 mm thick MR grade finish

mm thick laminate and whole table having MS

CRCA Pipe framing of 50 mm x 50 mm x 1.6 mm size

and 50 mm x 25 mm x 1.8 mm size finished with epoxy

powder coated of 50-micron thickness as per drawing /

photograph and details including all materials and

labour etc. complete as directed by Engineer in charge.

(with T.W. border with melamine polish) Table minimum

size: 2400 mm x 900 mm x 750 mm.

INDX SPECI Page

Item No. Specification

as per Item Description Applicable specification Booklet

Tender Attached

4. Providing and supplying Side unit with top 37 mm As per separate sheet attached Separate

overall thickness made from 18 mm thick MR grade herewith sheet

plywood with 1 mm thick laminate on top with

melamine finished polish. Side and drawer made of

mm thick MR grade plywood with 4 mm thick veneer

with melamine finished polish and inside

balancing laminate of approved shade. Teak wood

border with melamine finished polish of specified size to

be provided all around the borders of plywood. Drawer

run on heavy duty telescopic channel with heavy duty

lock with two keys and shutter fixed with auto hinges,

including allnecessary fixtures and fastening as

approved and back of the unit with 6 mm thick marine

grade plywood with 0.8 mm thick laminate of approved

shade with nylon bullet including all materials and

labour etc. complete as directed by Engineer in charge.

Side Unit minimum size: 900 mm x

5. Providing and supplying Three-Seater Sofa of premium As per separate sheet attached Separate

make with structure made from 18mm MR grade h erevVith sheet

plywood supported with Maranti Solid wood, back side

and curved part covered with 3mm flexi ply, sofa

made from 12mm thick MR grade plywood supported

with maranti solid wood. Elastic Belt, 75mm board and

2.25 mm thick elastic webbing stapling in seat frame at

100 mm centre to centre distance, belt fastener in X and

Y axis of seat, elastic belt elongation 45 perc. tensile

strength 350 kg. Foam 100 mm x 40 density Premium

Quality foam covered with 25mm x 32 density super soft

Premium Quality Foam for soft touch filling in seat.

mm x 40 density Premium Quality foam covered with

25mm x 32 density super soft Premium Quality foam for

soft touch filling in back.

Stitching work done with well-

known German brand (Aman / Gutermann) Thread.

Nylon and Polyester thread used as per application.

mm x 50 mm Wooden Legs applied with polishing.

Including all materials Hardware and labours etc.

complete as directed by Engineer in charge. (HOF Make:

Cierzo 3-Seater Sofa or equivalent premium make) Size:

minimum 1925 mm x 850 mm x 850 mm (H).

INDX SPECI Page

Item No. Specification

as per Item Description Applicable specification Booklet

Tender Attached

6. Providing and fixing wash down water closet (European Item No. 23.112 (A) (1) / P-165 + Building

type W C pan) with integral P and S trap including Item No. 23.120 / P-167. Work

•ointing the trap with soil pipe in cement mortar 1:1 (1 10 Litre PVC flushing cistern with

cement five sand) including providing and fixing plastic a pair of C.I. or Mild steel

seat cover for wash down WC with CP brass hinges and Brackets. The cost also includes

rubber buffers back plastic seat and including providing plastic seat & cover. The seat &

and fixing PVC flushing tank with a pair of C I or MS cover shall match with the same

bracket with complete fitting such as PVC valve siphon of W.C. pan or as directed. Plastic

15 mm dia brass ball valve with polythene float CP brass seat cover and jet spray heavy

handle unions including Hand Faccet and couplings for duty with S.S. braided hose 60 cm

connection with inlet out let and over flow pipes 40 mm long as per item description. The

dia porcelain enameled flush bend including cutting contract rate shall be inclusive of

holes in walls and making good the same connection all above items & the payment

the flush bend, Flush Tank capacity of 10 Lit. with shall be made for a unit of

cistern and closet vitreous china.{Hindustan, Cera, No. basis. The European type W.C.

Parryware or equivalent } Pan shall be Hindustan, Cera,

Parry ware or equivalent or as

7. Providing and fixing wash basin (Hindware, Perry, Cera Item No. 23.127 / P-167 + Building

or equivalent approved quality) with single hole / Table Item No. 23.95 (A) / P-170 + Work

top for pillar tap with C.I. or M.S. brackets painted white Item No. 23.00.4 / P-171 +

including cutting holes and making good the same Item No. 23.135 (A) / P-168 +

including fittings such as 15 mm pillar tap, chromium Item No. 23.136 (A) / P-168 +

plated bottle trap, C.P. brass waste pipe and 15 mm stop Item No. 23.96 (A) / P-171.

cock, M.I. fisher union (ii) Flat back wash basin 500mm x The Wash basin all necessary

400mm size including all necessary pacca fittings etc. fittings shall be of Jaquar,

complete as directed. Hindustan, Cera, Parry ware,

Hindware or equivalent as

directed. The contract rate shall

be for a unit of One Number basis

for completed item.

8. Providing and fixing Urinal or approved quality Item No. 23.122 / P-172 Building

including conecting the Urinal with waste pipe tap etc. The contract rate shall be for a

complete.(A) White earthenware flat back or corner unit of One Number basis for

type size 430mm x 260mm x 350mm. completed item.

9. Providing and fixing Urinal of approved quality Item No. 23.124 / P-172 Building

including connection with trap and with integral The contract rate shall be for a Work

longitudinal flush pipe.(A) Squating plate pattern unit of One Number basis for

white earthenware 550mm x 300mm. completed item.

10. Providing and fixing chromium plated brass half trun Item No. 23.00 (11) / P-171 Separate

flush cock of approved quality including fixing in pipe The contract rate shall be for a sheet

line etc. complete.(ii) 25mm dia. unit of One Number basis for

completed item.

INDX SPECI Page I I

Item No. Specification

as per Item Description Applicable specification Booklet

Tender Attached

11. Providing and fixing screw down bib taps of following Item No. 23.92 / P-170 Separate

screwdown bib tap polished bright. The contract rate shall be for a sheet

15mm dia. unit of One Number basis for

completed item.

12. Providing and fixing 600mm x 450mm bevelled edge Item No. 23.143 / P-169 Separate

mirrror of superior glass mounted on 6mm thick A.C. The contract rate shall be for a sheet

sheet or plywood sheet and fixing to wooden pluge with unit of One Number basis for

C.P. brass screws and washers. completed item.

13. Dismentling doors, windows, ventilators etc. (wood or Item No. 20.49 (1) / P-150 Separate

steel) shutters including chowkhats architraves, holdfasts The contract rate shall be for a sheet

and other attachment etc. complete and stacking them unit of One Number basis for

within all lead and lift.(i) Not exceeding 3 Sq.M. in area. completed item.

14. Providing and fixing standared extruded of alluminium As per separate sheet attached Separate

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 herewith sheet

Kg/mt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

15. Providing and fixing 35 mm thick shutters for Doors, Item No. / P-69 Separate

windows and clerestory windows including Indian teak Expect the 35 mm thick shutters sheet

wood frames 10 cm x 7 cm. size including black for Doors, windows and

enamelled iron oxidixed fixtures and fastenings clerestory windows including

including primer coat of approved quality and two coats Indian teak wood frames

of oil painting etc, complete. (ii) Fully Panelled. 7 cm. size including black

enamelled iron oxidixed fixtures

and fastenings including primer

coat of approved quality and two

coats of oil painting etc,

complete. (ii) Fully Panelled. The

contract rate shall be for a unit of

One Sq. meter basis for

completed item.

16. Providing and laying water proofing treatment on As per separate sheet attached Separate

terrace with broken China mosaic tiles flooring over herewith sheet

average 40 mm C.C. 1:2:4 bedding for maintaining slope

for plain and curve surface and 12 mm to 20 mm of

broken piece of ceramic / glazed tiles (one for more

colour as directed) to be laid over cement mortar

bedding of C. M. 1:3 (1 cement : 3 sand) contain one KG

of water proofing materials per bag of OPC at plain or /

and slops and to be tempered to bring mortar ceramic

up to surface with using white cement and colour

pigment, including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends

any patterns or design as per drawing and cleaning by

using oxalic acid etc. complete.

INDX SPECI Page

Item No. Specification

as per Item Description Applicable specification Booklet

Tender Attached

17. Providing erecting and fixing double coated ISI water As per separate sheet attached Separate

tank of required capacity each with all necessary fittings herewith sheet

and connection etc. complete on terrace

18. Applying general insecticide pest control treatment to As per separate sheet attached Separate

floors, cupboards etc including labour materials etc. herewith sheet

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part

II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water application

0.5 litre chemical /Sqm of surface is recommended as

19. Carring out plinth treatment to post construction / As per separate sheet attached Separate

existing structure by spraying chemical solution for herewith sheet

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

20. Providing and fixing Safety grill / Compound wall Gate As per separate sheet attached Separate

of required pattern for window / door using 16mm herewith sheet

diameter M.S. polished bars and rectangular CRC pipes

of size 50 x 30 x 2mm at required spacing as per design

and hold fasting with coach bolts including applying a

priming coat of red lead paint and two coats of oil

painting etc. complete for all floor.

21. Providing and fixing extruded colour anodized As per separate sheet attached Separate

(0 aluminium two track sliding window having aluminium herewith sheet

section having outer frame for bottom member of size

92.00 x 31.75 x 1.50 mm size weight of 1.248 KG / Mtr

and outer frame for top and sides members size 92.00 x

31.75 x 1.50 mm size weight of 1.06 KG / Mtr, for

shutters using top and bottom size 50 x 20 x 1.50 mm

size weight 0.642 KG / Mtr & interlock member size 50 x

29 x 1.50 mm size weight 0.697 KG / Mtr & handle

member size 50 x 20 x 1.50 mm size weight 0.571 KG /

Mtr with mosquito net shutter work etc. complete or as

Dated Signature of Deputy ecutive Engineer Executive Engineer

the Contractor. (R & B) Sub-Division, (R & B) Division,

KHAMBHAT. ANAND.

INDX SPECI Page

LIST OF APPROVED MAKES

1. Plywood (B. W. R.) Century Ply, Green Ply, Samrat Ply, Specewood or equivalent

2. Wood Ghana Teak wood, Burma wood or equivalent

3. Laminate Century Ply, Green Ply, Olive, Specewood or equivalent

4. M. S. CRC Flat .. Jindal, Tata or equivalent

5. M. S. CRC Round, Square pipe

Jindal, Tata Precision or equivalent

6. Aluminium Extrusion . JM, Mann, Hindalco or equivalent

7. PU Foam Kurlon, Sleepwall, Feather foam or equivalent

8. Fabric Tapestry .

Sarom, Neptune, Decor or equivalent

9. Mattress Sleepzone, King koli, PEPE, Specewood, Coridoam or equivalent

10. S.S. Hinges Hettich, Hafele, Specewood or equivalent

11. S.S. Handle Hettich, Hafele, Specewood or equivalent

12. S.S. Stud .

Hettich, Hafele, Specewood or equivalent

13. S.S. Auto Hinges Hettich, Hafele, Specewood or equivalent

14. Locks Hettich, Godrej or equivalent

15. Chairs HOF, Godrej, Classic or equivalent

16. Anchor Fasteners Hettich, Hafele, Ebco, Specewood or equivalent

17. Drawer Channel Hettich, Hafele, Mepal, Specewood or equivalent

18. Drawer Lock Godrej, Kombo, Specewood, Hettich or equivalent

19. Sliding Rail / Channel Hettich, Mepal, Ebco or equivalent

. Saint Gobain, Modi Guard, Asahi or equivalent

Fevicol, Henkel or equivalent

22. Miscellaneous Hardware .

Hettich, Hafele, Ebco, Kombo, Specewood or equivalent

Approved Makes Page

GENERAL TECHNICAL SPECIFICATIONS

1. In the specifications, "as directed" / "Approved" shall he taken to mean "as directed" /

"approved" by the Engineer in charge.

2. Wherever a reference to any Indian Standard appears in the specifications, it shall be taker to

mean as a reference to the latest edition of the same in force on the date of agreement.

3. In "Mode of Measurement" in the specifications wherever a dispute arises in the absence of

specific mention of a particular point or aspect, the provisions on these particular points or

aspects in the relevant Indian Standards shall be referred to.

4. All measurements and computations, unless otherwise specified, shall be carried out nearest to

the following limits:

Length, width and depth (height)

(iii) Cubic Contents •

In recording dimensions of work, the sequence of length, width and height (depth) or thickness

shall be followed.

5. The distance which constitutes lead shall be determined along the shortest practical route and

not necessarily the route actually taken. The decision of the Engineer in charge in this regard

shall be taken as final.

6. Where no lead is specified; it shall mean "all leads".

7. Lift shall be measured from plinth level.

8. Up to "floor two level" means actual height of floor (Maxi. 4 M.) up to 3 Mt. above plinth level.

9. Definite particulars covered in the items of work, though not mentioned or elucidated in it,

specifications shall be deemed to be included therein.

10. Reference to specifications of materials as made in the detailed specification of the items of

work is in the form of a designation containing the number of the specification of the material

and prefix 'M' e.g. 'M-5'.

11. Approval to the samples of various materials given by the Engineer in charge shall not absolve

the contractor from the responsibility of replacing defective material brought on site or

materials used in the work found defective at a later date. The contractor snall have no claim to

12. The contract rate of the item of work shall be for the work completed in all respects.

13. No collection of materials shall be made before it is got approved from the Engineer in charge.

14. Collection of approved materials shall be done at site of work in a systematic manner. Materials

shall be stored in such a manner as to prevent damage, deterioration or intrusion of foreign

matter and to ensure the preservation of their quality and fitness for the work.

15. Materials, if and when rejected by the Engineer-in-charge, shall be immediately removed from

the site of work.

16. No materials shall be stored prior to, during and after execution of a structure in such a way as

to cause or lead to damage or overloading of the various components of the structure.

17. All works shall be carried out in a workmanlike manner as per the best techniques for the

particular item.

18. All tools, templates, machinery and equipment for correct execution of the work as well as for

checking lines, levels, alignment of the works during execution shall be kept in sufficient

numbers and in good working condition on the site of the work.

19. The mode, procedure and manner of execution shall be such that it does not cause damage or

loading of the various components of the structure during execution or after completion

of the structure.

20. Special modes of construction not adopted in general Engineering practice, if proposed to be

adopted by the Contractor, shall be considered only if the contractor provides satisfacto

evidence that such special mode of construction is safe, sound and helps in spee

construction and completion of work to the required strength and quality. Acceptance of the

the contractor of the responsibility

same by the Engineer in charge shall not, however, absolve

same in the course of execution

of any adverse effects and consequences adopting

completion of the work.

21. All installations pertaining to water supply and fixtures thereof as well as drainage lines and

sanitary fittings shall be deemed to be completed only after giving satisfactory tests by the

22. The contractor shall be responsible for observing the rules and regulations imposed under

Minor Minerals Act", and such other laws and rules prescribed by Government from time to

23. All necessary safety measures and precaution (including those laid down in the various relevant

Indian Standards) shall be taken to ensure the safety of men, materials and machinery on the

works as also of the work itself.

The testing charges of all materials shall be borne by the Contractor unless recovery at o

percent towards testing charges is separately made.

25. Approval to any of the executed items for the work does not in any way relieve the contractor

of his responsibility for the correctness, soundness and strength of the structure as per the

drawings and specification.

26. The work shall be carried out with the best practice followed in the industry. The contractor

shall make sure that the item to be carried out in its perfect state as per the standards practice.

Additionally, executed work shall not be damaged and shall be free from any dents or

scratches. It is the duty of the contractor to make proper arrangements for protection of the

items during execution till handover. The contractor shall get the items inspected and

approved by Engineer in charge before execution / installation. Any claim, upon rejection of

any item by the Engineer in charge will not be entertained. The contractor shall execute the

item as directed by Engineer in charge at all floors / all heights and all levels.

27. The rate shall be consolidated for all items. The Rate shall also include all tools, plants,

equipment, scaffoldings, labour, taxes, conveyance, and other incidentals for satisfactory

completion of the work, including necessary wastage involved for the work. No extra payment

will be given for any reason.

[II Minimum Specification for Pre-laminated particle board:

ISI Specification conforming to IS

Sr. No. Property

1 Density 500-900 Kg/m3

2 Moisture content 5-15 0/0

3 Max Water Absorption In Percent

Thickness swelling (2 hours)

4 Minimum Modulus of Rupture In N/mm

Up to 20mm thick

Up to 20mm thick

5 Tensile Strength Perpendicular to surface (min) In N/mm

Up to 20mm thick

Up to 20mm thick

6 Screw withdrawal strength (min) In N

7 Abrasion Resistance (min) Number of revolutions

[21 Minimum Specification and for Powder Coating:

Not lesser than 50 microns thick and standard colours

Powder coating shall be with Epoxy powder of a standard shade or as required.

The specific gravity of powder should be such that it gives DFT (Dry Film Thickness) of 50 —

It should withstand salt spray test of not less than 1000 hrs

Scratch Hardness Test as per DIN 53153 shall be conducted and results should be such that no

scratch shall show bare metal with a load of 3 kgs.

(10) Ten steps Phosphating process treatment shall be conducted before powder coating.

Hot water rinse

Knock of Degreasing

(iii) De-rusting

(iv) Cold water rinse

(v) Surface Activation

(vi) 2 stage Phosphating

(vii) Water rinse

(viii) Passivation

(ix) Oven drying

(x) Powder Coating

[3] List of Brand for various hardware materials:

Sr. No. Description Brand

1 BWR Plywood Century Ply, Green Ply, Samrat Ply,

Specewood or equivalent

Commercial Kitply, Anchor, Green Ply

Marine Kitply, Anchor, Green Ply

2 Pre-laminated Particle Board Novapan, Merino, Associate

3 Laminate Formica, Merino, Decolam

Greenlam, Kitply, Associate

4 Screws GKW, nettlefold

5 Powder coating Marpol, Nerocoat, Berger

6 Adhesive, Wooden Adhesive, Tile adhesive & grouting Fevicol, Blue Coat

7 Structural Roller Steel Section-beam, channels, tee, flats, Tata, Sail

angles, bars (Round, Square hexagonal)

8 MS ERW (CRC) Pipes (Square, Rectangular & Tubular) Tata, Asian, Jindal

9 Structural Tubular Section Tata, Asian, Jindal

10 Marine Grade Plywood As per IS-710 (any thickness) Archild Gold-MR, Century (VIN-MR)

11 4 mm thick Veneer Archild, Century, Green

12 MDF (any thickness) Nuwood, Duratuff (exterior grade

13 Laminate sheet 1 mm thick Archild, Century, Green

14 Furniture Locks Multipurpose locks Godrej, Ebco, Hettich, Europa

15 Drawer Channels Godrej, Ebco, Hettich, Hafele

16 Auto closing hinges Godrej, Ebco, Hettich, Hafele

17 But hinges Kich, Ebco

18 Handles Kich, Ebco

19 Back painted Glass / clear float glass AIS, Asahi, Saint Gobain

20 Grid tiles for ceilings Armstrong

21 Silicon Sealant / Silicon Paint Polysulphide sealant P.U. Wacker, Dowcorning, GE, Soudal,

sealant. Bostic pedilite, chawksey, sika,

(Exterior grade —

22 Paint, Primer, putty Asian, Berger, ICI, Birla Putty

23 Lacquer / Melamine Asian, MRF, Berger

24 Oil & Water finish Double boiled CAT brand linseed oil

and MTO of reliance

25 Aluminium Sections (any type) Jindal, Hindalco

26 Teak wood Selected & sorted, seasoned Indian

Teak Wood with uniform veins and

with anti termite treatment.

27 Magnet Catchers Magnum, EPPW

28 Castors Rexeloo Castors / Bombay Star

29 Screw GKW, Nettlefold

30 Powder Coating Marpol, Newcoat, Berger

[41 Specifications for French / Melamine Polishing:

1.0. Materials:

1.1. The French polish required tint and shade shall be prepared with the below mentioned

ingredients and other necessary materials: (i) Chandra (ii) Shellac (ic) Pigment. The French

polish so prepared shall conform to I.S. 348-1968.

2.0. Workmanship:

2.1. Preparation of surface:

2.1.1. All unevenness shall be rubbed down to smoothness with sand paper and the surface shall be

well dusted. The proper in the wood shall be filled up with a filler made of a paste of whiting in

water or methylatéd spirit (with a suitable pigment like burnt sienna or umber if required):

otherwise the French polish will get absorbed and a good gloss will be difficult to obtain.

2.2. Application:

2.2.1. A pad of wooden cloth covered by a fine cloth shall be used to apply the polish. The pad shall

be moistened with polish and rubbed hard on the surface in a series of overleaping circles

applying the polish sparingly but uniformly

over the entire area to give an even surface. A trace

of linseed oil on the face of the pad may be added which shall facilitate this operation. The

surface shall be allowed to dry and the remaining coats applied in the same way. To finish

the pad shall be covered with a fresh piece of clean fine cloth, slightly damped with methylated

spirit and rubbed lightly and quickly with circular motions. The finished surface shall present a

uniform texture and high loose.

[51 Oil Painting

on Wood surfaces:

1.0. Materials:

1.1. The ready mixed paint, brushing, wood primer pink shall conform to I.S. 3536-1966

2.0. Workmanship:

2.1. Preparation of surface:

2.1.1. All wood work shall be dry and free from any foreign matter incidental to building operations.

Nails shall be punched well below the surface to provide a film key for stopping. Mouldi

shall be carefully smoothened with abrasive paper and projecting fibres shall be removed. Flat

portions shall be smoothened off with abrasive paper used across the grain prior to painting

prior to painting and with the grain prior to staining or if the wood is to be left in its natural

colour, wood work which is to be stained may be smoothened by scraping instead of by glass

papering if so required.

2.2.2. Any knots, resinous, streaks or bluefish sap wood that are not large enough to justify cutting

out shall be treated with two coats of pure shellac knotting applied thinly and extended about

25 mm beyond the actual area requiring treatment.

3.1. Application of Primer:

3.1.1. After the preparation of the surface, the priming coat shall be applied immediately. The

brushing operations are to be adjusted to the spreading capacity advised by the manufacturer

of the particular primer. The paint shall be applied evenly and smoothly by means of crossing

and laying off. The crossing and laying off consists of covering the area over with paint,

brushing alternately in opposite directions, two or three times and then finally brushing lightly

in a direction at right angles to the same. In this process, no brush marks shall be left after the

laying off is finished. The full process of crossing and laying off wall constitute one coat.

3.1.2. During painting, every time, after the priming coat has been worked out of the brush bristles or

after the brush has been unloaded, the bristles of the brush shall be opened up by striking the

brush against portion of the unpainted surface with the end of the bristles, held at right angles

to the surface, so that bristles thereafter will collect the correct amount of paint when dipped

again in to a paint container The prima/y coat shall be allowed to dry completely before

painting is started.

3.1.3. No hair marks from the brush or clogging at pain puddles in the corner of panels angles of

moulding etc. shall be left on the work.

3.1.4. Special care shall be taken while painting over bolts, nuts, rivets, overlaps etc.

3.1.5. The container when not in use shall be kept close and free from air so that paint does not

thickness and also shall be kept guarded from dust.

Detail Item Specification

Name of Work :- State Tax Office at Petlad [Reparing of Toilet Block,

Furniture, Plumbing work, Water Proofing, Pest control

treatment, Door- Ventilation, Street ligth and Other

DETAIL ITEM SPECIFICATION

Providing and fixing Impulse Blackout Roller Blinds with fabric of 0.53 mm thickness and

top channel of non-rusting aluminium alloy with 1.25 mm thickness and bottom channel of

1.50 mm thickness and 21 mm diameter. Tilt channel of ABS plastic with 1.50 mm

polyester cord with 4.50 mm balls with stop lock arrangement including all necessary

fixture, fasteners, fittings, labour material machinery etc. complete of premium quality and

as selected and directed by Engineer-in-charge.

Providing and Fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness and Top channel c

non-rusting aluminium alloy with 1.25mm thickness and bottom channel of 1.50mm thickness & 2 Imr

diameter. Tilt channel of ABS plastid with 1.50mm polyster cord with 4.50mm balls with stop loc

arrangement including all necessary fixture, fastners, fittings, labour material machinary etc complete

seletced and diretced by Engineer Incharge. Roller Blinds : of premium Quality as Aproved By EIC.

Type of Fabrics Blackout

Composition of Fab. 100 % Polyester woven

Visibility Zero

Light Transparent Zero

Available Width 2.50 Mtrs.

Fabric Thickness 0.53 MM (+-0.05)

Weight 475 g/m2 (+-5%)

Tearing Strength Very High

Hanging Properties Excellent

Coating Acrylic coating resistant to Cracking & Fraying

Cleaning Conditionally cleanable with damp cloth

Roller Blind top channel extruded by Non rusting Aluminum alloy with 1.25 mm thickness, with anodize

for long life. The Channel is designed with support beam to keep it straight and shall have a pocket fc

holding the fabrics in position. Available in 32 & 38 mm diameters for small and big blind respectively.

Bottom Channel of Roller Blinds is again none rusting Aluminum powder coated with 1.50 mm thicknes

and 21 mm diameter. The fabric shall be enclosed in the suitably created pocket along with tube. Th

channel shall be closed from sides with the end caps to give a neat look. 10 colors available to match wit

the fabrics perfectly.

The tilt chain made by unbreakable ABS plastic, 1.50 mm polyester cord with 4.50 mm balls. The blind can

be stop in desire position with help of stop lock.

Detail Item Specification

This operating mechanism made by High strength ABS plastic, consist of a ultra smooth gear with sprin

booster. High carbon steel spring to transmit motion from driving to driven members. The mechanism sha

be operate with the use of tilt chain.

Fixing Brackets

The Brackets are made by steel with powder coating to give greater finish. Brackets shall b

accommodating overhead or side mounting with clutch assembly on either end of the blind.

2 Workmanship :

The work shall be carried out with the best practice followed in the industry. The contractor shall make sur

that the item to be installed is in its perfect state as per the standards established by its manufacture

Additionally, the items installed shall not be damaged and shall be free from any kind of damages. It is

duty of the contractor to make proper arrangements for protection of the items during stackinf

transporting, loading/unloading till handover. The contractor shall get the items inspected and approved b

the architect and/or EIC before installation. Any claim, upon rejection of any item by the EIC will not b

floors/all heights and all levels.

entertained. The contractor shall install the item as directed by EIC at all

3 Mode of Measurement

The rate shall be consolidated for all above items. The rate shall include cost of all materials, fixture

joineries hardwares etc & labour charges for all height to complete the work satisfactorily includin

of Engineer-in-charge.

supplying and arranging as per layout plan at site of work and as per the instruction

No Extra charge will be paid for any other reasons. The rate shall be for an unit of one Sq.Mt.

Providing and supplying High Back Premium executive Revolving Chair Sigma chrome

Base with Knee Tilt Synchro Mechanism with any Position back Lock, Seat and Back

Made from High Density U Foam, Arms -

Aluminium Die Casted with Cushion Pad

including all materials and labour etc. complete as directed by Engineer in charge. Size :

max. Height: 1290 mm to Min. 1170 mm, Seat: 530 mm x 520 mm, back 740 mm x

(Model Zoro 451)

All materials shall be as per item description and specified item's Manufacturer's specifications or

as approved by Engineer in charge and associated with General Technical Specifications for

Building Works shall be applicable.

The work shall consist of Providing and supplying High Back Premium executive Revolving Chair

Sigma chrome Base with Knee Tilt Synchro Mechanism with any Position back Lock, Seat and

Back Made from High Density U -

Aluminium Die Casted with Cushion Pad

including all materials and labour etc. complete as directed by Engineer in charge. Size : max.

Height: 1290 mm to Min. 1170 mm, Seat: 530 mm x 520 mm, back 740 mm x 500 mm. (Model

The whole work / readymade product is to be completed as per design, sample, shade, drawing

photographs and it shall be of premium quality as per instruction of Architect or as directed by

Engineer in charge,

Detail Item Specification

Mode of Measurements & Payment:

All the work shall be measured based on finished dimensions

as executed at site and shall be

paid. The rate includes the cost of all materials,

labour, machineries, tools and plants, fabrication,

erection, hoisting, scaffolding, protective measures required for proper completion of the item of

work as directed. The rate also includes the wastage and breakage involved in the process. No

extra payment will be given for any reason.

The payment will be made on Piece / Number basis of the finished work. This item is Self

Descriptive Providing and supplying High Back Premium executive Revolving Chair Sigma

chrome Base with Knee Tilt Synchro Mechanism with any Position back Lock, Seat and Back

Made from High Density U -

Aluminium Die Casted with Cushion Pad including all

materials and labour etc. complete as directed by Engineer in charge. Size : max. Height:

mm to Min. 1170 mm, Seat: 530 mm x 520 mm, back 740 mm x 500 mm. (Model Zoro 451) the

all Complete as per Drawing attached herewith. All fitting & fixing etc. and materials shall be ISI

approved or equivalent. including Loading from Factory as direction by engineer in charge etc.

completed work done.

The rate shall be for a unit of one Set.

Providing and supplying Wooden Table having 40 mm thick top overall thickness made

from 18 mm thick MR grade plywood, top and side finish with 1 mm thick laminate both

side (inside and outside) to be laminated and top back side 0.8 mm balancing laminate

including teak wood border patty of size 40 mm x 12 mm with appron to be made from

mm thick MR grade finish with 1 mm thick laminate and whole table having MS CRCA Pipe

framing of 50 mm x 50 mm x 1.6 mm size and 50 mm x 25 mm x

mm size finished with

epoxy powder coated of 50-micron thickness as per drawing / photograph and details

including all materials and labour etc. complete as directed by Engineer in charge. (with

T.W. border with melamine polish) Table minimum size: 2400 mm x

All materials shall be as per item description and specified item's Manufacturer's specifications or

as approved by Engineer in charge and associated with General Technical Specifications for

Building Works shall be applicable.

The work shall consist of Providing and supplying Wooden Table having 40 mm thick top overall

thickness made from 18 mm thick MR grade plywood, top and side finish with 1 thick

laminate both side (inside and outside) to be laminated and top back side 0.8 mm balancing

laminate including teak wood border patty of size 40 mm x 12 mm with appron to be made from

18 mm thick MR grade finish with I mm thick laminate and whole table having MS CRCA Pipe

framing of 50 mm x 50 mm x 1.6 mm size and 50 mm x 25 mm x 1.8 mm size finished with epoxy

Detail Item Specification

powder coated of 50-micron thickness as per drawing /

photograph and details including all

materials and labour etc. complete as directed by Engineer in charge. (with T.W. border with

melamine polish) Table minimum size: 2400 mm x 900 mm x 750 mm.

The work shall be carried out with the best practice followed in the industry. The contractor shall

make sure that the item to be carried out in its perfect state as per the standards practice.

Additionally, executed work shall not be damaged and shall be free from any dents or scratches.

It is the duty of the contractor to make proper arrangements for protection of the items during

execution till handover. The contractor shall get the items inspected and approved or as directed

by Engineer in charge before execution / installation. Any claim, upon rejection of any item by the

Engineer in charge will not be entertained. The contractor shall execute the item as directed by

Engineer in charge at all floors / all heights and all levels.

The whole work / readymade product is to be completed as per design, sample, shade, drawing /

photographs and it shall be of premium quality as per instruction of Architect or as directed by

Engineer in charge.

Mode of Measurements & Payment:

All the work shall be measured based on finished dimensions as executed at site and shall be

paid. The rate includes the cost of all materials, labour, machineries, tools and plants, fabrication,

erection, hoisting, scaffolding, protective measures required for proper completion of the item of

work as directed. The rate also includes the wastage and breakage involved in the process. No

extra payment will be given for any reason.

The payment will be made on Piece / Number basis of the finished work. This item is Self

Descriptive Providing and supplying Wooden Table having 40 mm thick top overall thickness

made from 18 mm thick MR grade plywood, top and side finish with 1 mm thick laminate both side

(inside and outside) to be laminated and top back side 0.8 mm balancing laminate including teak

wood border patty of size 40 mm x 12 mm with appron to be made from 18 mm thick MR grade

finish with 1 mm thick laminate and whole table having MS CRCA Pipe framing of 50 mm x

1.8 mm size finished with

epoxy powder coated

mm x 1.6 mm size and 50 mm x 25 mm x

micron thickness as per drawing / photograph and details including all materials and labour etc.

complete as directed by Engineer in charge. (with T.W. border with melamine polish) Table

minimum size: 2400 mm x 900 mm x 750 mm. all Complete as per Drawing attached herewith. All

fitting & fixing etc. and materials shall be ISI approved or equivalent. including Loading from

Factory as direction by engineer in charge etc. completed work done.

The rate shall be for a unit of one Set.

Detail Item Specification

Providing and supplying Side unit with top 37 mm overall thickness made from 18 mm

thick MR grade plywood with 1 mm thick laminate on top with melamine finished polish.

Side and drawer made of 18 mm thick MR grade plywood with 4 mm thick veneer with

melamine finished polish and inside 0.8 mm thick balancing laminate of approved shade.

Teak wood border with melamine finished polish of specified size to be provided all

around the borders of plywood. Drawer run on heavy duty telescopic channel with heavy

duty lock with two keys and shutter fixed with auto hinges, including all necessary fixtures

and fastening as approved and back of the unit with 6 mm thick marine grade plywood

with 0.8 mm thick laminate of approved shade with nylon bullet including all materials and

labour etc. complete as directed by Engineer in charge. Side Unit minimum size: 900 mm x

All materials shall be as per item description and specified item's Manufacturer's specifications or

as approved by Engineer in charge and associated with General Technical Specifications for

Building Works shall be applicable.

The work shall consist of Providing and supplying Side unit with top 37 mm overall thickness

made from 18 mm thick MR grade plywood with 1 mm thick laminate on top with melamine

finished polish. Side and drawer made of 18 mm thick MR grade plywood with 4 mm thick veneer

with melamine finished polish and inside 0.8 mm thick balancing laminate of approved shade.

Teak wood border with melamine finished polish of specified size to be provided all around the

borders of plywood. Drawer run on heavy duty telescopic channel with heavy duty lock with two

keys and shutter fixed with auto hinges, including all necessary fixtures and fastening as

approved and back of the unit with 6 mm thick marine grade plywood with 0.8 mm thick laminate

of approved shade with nylon bullet including all materials and labour etc. complete

Engineer in charge. Side Unit minimum size: 900 mm x 450 mm x 750 mm (H). The work shall be

carried out with the best practice followed in the industry. The contractor shall make sure that the

item to be carried out in its perfect state as per the standards practice. Additionally, executed

work shall not be damaged and shall be free from any dents or scratches. It is the duty of the

contractor to make proper arrangements for protection of the items during execution till handover.

The contractor shall get the items inspected and approved or as directed by Engineer in charge

before execution / installation. Any claim, upon rejection of any item by the Engineer in charge will

not be entertained. The contractor shall execute the item as directed by Engineer in charge at all

floors / all heights and all levels.

The whole work / readymade product is to be completed as per design, sample, shade, drawing /

photographs and it shall be of premium quality as per instruction of Architect or as directed by

Engineer in charge.

Detail Item Specification

Mode of Measurements & Payment:

All the work shall be measured based on finished dimensions as executed at site and shall be

paid. The rate includes the cost of all materials, labour, machineries, tools and plants, fabrication,

erection, hoisting, scaffolding, protective

measures required for proper completion of the item of

work as directed. The rate also includes the wastage and breakage involved in the process. No

extra payment will be given for any reason.

The payment will be made on Piece / Number basis of the finished work. This item is Self

Descriptive Providing and supplying Side unit with top 37 mm overall thickness made from 18 mm

thick MR grade plywood with 1 mm thick laminate on top with melamine finished polish. Side and

drawer made of 18 mm thick MR grade plywood with 4 mm thick veneer with melamine finished

polish and inside 0.8 mm thick balancing laminate of approved shade. Teak wood border with

melamine finished polish of specified size to be provided all around the borders of plywood.

Drawer run on heavy duty telescopic channel with heavy duty lock with two keys and shutter fixed

with auto hinges, including all necessary fixtures and fastening as approved and back of the un

with 6 mm thick marine grade plywood with 0.8 mm thick laminate of approved shade with nylon

bullet including all materials and labour etc. complete as directed by Engineer in charge. Side Unit

minimum size: 900 mm x 450 mm x 750 mm (H). all Complete as per Drawing attached herewith.

All fitting & fixing etc. and materials shall be ISI approved or equivalent. including Loading from

Factory as direction by engineer in charge etc. completed work done.

The rate shall be for a unit of one Set.

Detail Item Specification

Providing and supplying Three-Seater Sofa of premium make with structure made from

18mm MR grade plywood supported with Maranti Solid wood, back side and curved part

covered with 3mm flexi ply, sofa arm made from 12mm thick MR grade plywood supported

with maranti solid wood. Elastic Belt, 75mm board and 2.25 mm thick elastic webbing

stapling in seat frame at 100 mm centre to centre distance, belt fastener in X and Y axis of

seat, elastic belt elongation 45 perc. tensile strength 350 kg. Foam 100 mm x 40 density

Premium Quality foam covered with 25mm x 32 density super soft Premium Quality Foam

for soft touch filling in seat. 50 mm x 40 density Premium Quality foam covered with 25mm

x 32 density super soft Premium Quality foam for soft touch filling in back. Stitching work

done with well-known German brand (Aman I Gutermann) Thread. Nylon and Polyester

thread used as per application. 50 mm x 50 mm Wooden Legs applied with polishing.

Including all materials Hardware and labours etc. complete as directed by Engineer in

charge. (HOF Make: Cierzo 3-Seater Sofa or equivalent premium make) Size: minimum

All materials shall be as per item description and specified item's Manufacturer's specifications or

as approved by Engineer in charge and associated with General Technical Specifications for

Building Works shall be applicable.

The work shall consist of Providing and supplying Three-Seater Sofa of premium make with

structure made from 18mm MR grade plywood supported with Maranti Solid wood, back side and

curved part covered with 3mm flexi ply, sofa arm made from 12mm thick MR grade plywood

supported with maranti solid wood. Elastic Belt, 75mm board and 2.25 mm thick elastic webbing

stapling in seat frame at 100 mm centre to centre distance, belt fastener in X and Y axis of seat,

elastic belt elongation 45 perc. tensile strength 350 kg. Foam 100 mm x 40 density Premium

Quality foam covered with 25mm x 32 density super soft Premium Quality Foam for soft touch

filling in seat. 50 mm x 40 density Premium Quality foam covered with 25mm x 32 density super

soft Premium Quality foam for soft touch filling in back. Stitching work done with well-known

German brand (Aman / Gutermann) Thread. Nylon and Polyester thread used as per application.

50 mm x 50 mm Wooden Legs applied with polishing. Including all materials Hardware and

labours etc. complete as directed by Engineer in charge. (HOF Make: Cierzo 3-Seater Sofa or

equivalent premium make) Size: minimum 1925 mm x 850 mm x 850 mm (H). The work shall be

carried out with the best practice followed in the industry. The contractor shall make sure that the

item to be carried out in its perfect state as per the standards practice. Additionally, executed

work shall not be damaged and shall be free from any dents or scratches. It is the duty of the

contractor to make proper arrangements for protection of the items during execution till handover.

The contractor shall get the items inspected and approved or as directed by Engineer in charge

Detail Item Specification

before execution / installation. Any claim, upon rejection of any item by the Engineer in charge will

not be entertained. The contractor shall execute the item as directed by Engineer in charge at all

floors / all heights and all levels.

The whole work / readymade product is to be completed as per design, sample, shade, drawing /

photographs and it shall be of premium quality as per instruction of Architect or as directed by

Engineer in charge.

Mode of Measurements & Payment:

All the work shall be measured based on finished dimensions as executed at site and shall be

paid. The rate includes the cost of all materials, labour, machineries, tools and plants, fabrication,

erection, hoisting, scaffolding, protective

measures required

proper completion of the item of

work as directed. The rate also includes the wastage and breakage involved in the process. No

extra payment will be given for any reason.

The payment will be made on Piece / Number basis of the finished work. This item is Self

Descriptive Providing and supplying Three-Seater Sofa of premium make with structure mad

from 18mm MR grade plywood supported with Maranti Solid wood, back side and curved part

covered with 3mm flexi ply, sofa arm made from 12mm thick MR grade plywood supported with

maranti solid wood. Elastic Belt, 75mm board and 2.25 mm thick elastic webbing stapling in seat

frame at 100 mm centre to centre distance, belt fastener in X and Y axis of seat, elastic belt

elongation 45 perc. tensile strength 350 kg. Foam 100 mm x 40 density Premium Quality foam

covered with 25mm x 32 density super soft Premium Quality Foam for soft touch filling in seat.

mm x 40 density Premium Quality foam covered with 25mm x 32 density super soft Premium

Quality foam for soft touch filling in back. Stitching work done with well-known German brand

(Aman / Gutermann) Thread. Nylon and Polyester thread used as per application. 50 mm x

mm Wooden Legs applied with polishing. Including all materials Hardware and labours etc.

complete as directed by Engineer in charge. (HOF Make: Cierzo 3-Seater Sofa or equivalent

premium make) Size: minimum 1925 mm x 850 mm x 850 mm (H). all Complete as per DrawinC)

attached herewith. All fitting & fixing etc. and materials shall be ISI approved or equivalent.

including Loading from Factory as direction by engineer in charge etc. completed work done.

The rate shall be for a unit of one Set.

Detail Item Specification

Item No. 14 Providing and fixing standared extruded of aluminium section of size

@ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

1.1 Standard extruded anodized alluminium section for ventilation allows used in the

manufacture of extruded section shall confirm to I.S. designation HEA -

1983 and also designation WVG -

1975 section shall be as specified in

the drawing a design or as directed by Engineer-in-charge. All section shall be free from

scratches holes or any damages on surface. All section shall have finished plaster surface

I.I.I. The work includes standard extruded of Aluminium section of size 63mm x 38.10 mm x

1.2mm (@wt. 0.643 Kg/mt.) with colour powder coated alluminium frame for ventilation as

directed by Engineer in charge.

1.2 Glass : The frosted glass of louvers fixed to alluminium strip blade shall be of approved

make having thickness of 5mm. The glass shall be clear and free from scratches and

cracks. The glass shall be provided on wall panel and fixed with tinted silicon gasket.

1.2.1 The glass shall be of the brief quality, free from specks, bubbles, smcken veins, air holes

distress and other defects. The kind of glass to be used shall be as mentioned in the item

or as shown in detailed drawing or as directed by Engineer-in-charge.

1.3. Glazing clips: Glazing clips shall be colour marble jambs all around the ventilator shall be

free from any scratches or holes or any damage of on surface all section shall have

finished luster surface on all sides.

1.4 Rubber Gasket : Rubber gasket shall be approved make shall be free from any scratches

or holes or any damage on surface and shall have finished luster surface on all sides.

1.5.1. Hinges shall be of approved make shall be free from any scratches or holes or any

damage on surface and shall have finished luster surface on all sides.

The work of standard extruded of Aluminium section for ventilation shall be done with

extreme finishing. The inclined blades shall be fixed as directed by Engineer-in-charge. 5mm thick

frosted glass as details as details etc. complete.

MODE OF MEASUREMENT & PAYMENT

The unit rate of standard extruded of Aluminium section for ventilation shall include the

cost of all labours, materials, anodizing charges, tools, plants, cost of necessary fixtures

The rate shall be for a unit of one square meter.

Detail Item Specification

Providing and laying water proofing treatment on terrace with broken China mosaic tiles

flooring over average 40 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface and 12 mm to 20 mm of broken piece of ceramic / glazed tiles (one for more

colour as directed) to be laid over cement mortar bedding of C. M. 1:3 (1 cement : 3 sand)

contain one KG of water proofing materials per bag of OPC at plain or / and slops and to be

tempered to bring mortar ceramic up to surface with using white cement and colour

pigment, including rounding of junctions and extending them up to 15 cm along the wall

and curing with bends any patterns or design as per drawing and cleaning by using oxalic

acid etc. complete.

The existing R.C.C. surface of slab shall be cleaned thoroughly.

Applying and grouting a slurry coat of neat cement using 2.75 KG Sqm of cement admixed

properly using water proofing compound conforming to IS: 2645 over the R.C.C. slab. The top

surface shall be finished rough surface as per the direction so as to receive the next

Laying 40 mm thick cement concrete 1:2:4 using stone aggregates of 20 mm to 40 mm size

admixed with properly water proofing compound conforming IS: 2645 and the item shall be as

(B) / P-100 shall be followed, except floating coat of neat cement slurry,

treating similarly the adjoining walls up to 150 mm height including rounding of junctions of walls

After two days of proper curing, applying a second coat of cement slurry admixed with proprietary

water proofing compound conforming to IS:

Finishing the surface with 12 mm thick joint less cement mortar of mix 1:3 (1 Cement :3 Coarse

sand) admixed properly using water proofing compound conforming to IS: 2645 than applying

glazed tiles pieces over cement mortar and finally finishing the surface with trowel with white

Triangular china mosaic pieces shall not be used. Rectangular or square pieces shall only be use

The broken pieces shall be soaked in water for 24 hours before using. The broken china pieces a

laid manually as close as possible over the specified bedding (before it sets/ gets hard), which

shall be laid to the required slope and gradient.

While laying the broken glazed tiles, neat cement paste shall be applied over the bedding. After

china mosaic is arranged, the entire surface shall be tampered by wooden piece with a wooden

mallet so that tile piece is properly embedded and leveled in the mortar and slurry starts oozing

from the joints. Vata shall be done along with the floor, keeping machine cut edges at the top end

of the vata. At the end of day's work, the entire work shall be cleaned with the minimum quantity

of water and moped with the cotton cloth. The joints shall be grouted firmly with white cement

paste with the help of steel trowel.

2.3. Unless otherwise specified proprietary waterproofing treatment shall be executed through

approved specialized water proofing agency. Contractor shall furnish a guarantee of 5 years on

stamp paper to the employer directly and the tender rate shall be inclusive of the same.

Detail Item Specification

A guarantee bond on appropriately stamp paper shall be given by the contractor to the client in

manner form prescribed below:

FORM OF GUARANTEE BOND

"1/We (Contractor) hereby guarantee that work will remain unaffected and will not be

in any way damaged by water or any other form of humid condition, for a period of 5 years after

completion of the work of water-proofing as per the terms and conditions of the contract and the

Contractor hereby indemnifies and agrees to save the Client from any loss and or damage that

might be caused on account of water and or other similar form of humid conditions and hereby

guarantees to make good any loss or damage suffered by the Client and further guarantees to

redo the affected work without claiming any extra cost."

2.4. This guarantee shall remain in force for a period of 10 years from the completion of the work

under the contract and it shall remain binding to the Contractor for period of 10 years. The

deposit at the rate of 50% of the cost of this item from the running and final bills shall be

recovered and retained for the first one year after completion of the work and 10% shall be

retained for the balance of guarantee period and shall be refunded only after the completion of

the guarantee period.

2.6.After two days of proper curing, applying a second coat of cement slurry admixed with

proprietary water proofing compound conforming to IS:

2.7. Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :

coarse sand) admixed properly using water proofing compound conforming to IS: 2645 than

applying glazed tiles pieces over cement mortar and finally finishing the surface with trowel with

white cement slurry. The joints of white glazed tiles pieces (China mosaic flooring) shall not be

more than 3 mm apart and joints shall be pointed with flush pointing.

2.8. Well defined cracks other than hair cracks in the treated structure shall be cut to 'V' section,

cleaned and then filled up flush with 1:1 cement sand mortar with polymer based waterproofing

2.9. The surface under treatment, part of parapet (in

case of balcony or terrace) and gutters, drain

mouths etc. over which the water proofing treatment is to be applied, shall be cleaned of all

foreign matter such as fungus, moss and dust by wire brushing and dusting.

2.10. Drain outlet shall be suitably placed with respect to the surface gradient to ensure rapid

drainage and prevention of local accumulation of water on the treated surface. Masonry drain

mouth shall be widened sufficiently and rounded with cement mortar.

2.11. In case of masonry parapet wall over 450 mm in height, for tucking in the water proofing

treatment, a horizontal groove 75 mm wide and 65 mm deep at minimum height of 300 mm

above terrace level shall be left in the vertical face at the time of construction, the horizontal face

of the groove shall be shaped with cement mortar 1:4.

2.12. In case of low parapet where the height does not exceed 450 mm, no groove shall be

provided and the water proofing treatment shall be carried right over the top.

2.13. In case of existing R.C.C. and stone wall cutting the chase for tucking in the water proofing

treatment is not recommended.

Detail Item Specification

2.14. At the junction between the terrace slab and vertical face of the parapet wall, a fillet 75-100

mm in radius shall be constructed.

2.15. At the drain mouths the fillet shall be suitably cut back and rounded off for each application

of water proofing treatment for easy flow of water.

2.16. Outlet at every low dividing wall about less than 300 mm in height shall be rounded smooth

and corners rounded off f or easy application of water proofing treatment.

2.17. The top surface shall be kept wired finish to receive the china mosaic. In case china mosaic is

not to be provided, the surface shall be kept cement finished @ 2.75 kg/ Sqm and marked with

300 x 300 mm false square (with string).

The whole terrace so finished shall be flooded with water for a minimum period of two weeks of

curing and for final test. All above operations to be done in order and as directed and specified by

the engineer in charge. The testing shall be done by ponding for at least 48 hours.

3.0. Mode of Measurement and Payment:

3.1. The rate includes cost of all materials and labour required to carry the works as per the abov

specifications. The rate also includes cleaning and hacking the R.C.C parapet and inverted beam

surface and treating the cracks shall not be paid separately. Cutting of horizontal grooves in

parapet walls for tucking in water proofing treatment shall not be measured or paid separately.

3.2. Measurements shall be based on the drawings or as executed on site, the lesser of the two

shall be given. No extra payment shall be made for rounding and vata at the junction of slab &

parapet. A deposit at the rate of 50% of the cost of this item from the running and final bills shall

be recovered and retained for the first one year after completion of the work and 10% of the same

or equivalent bank guarantee shall be retained for the balance of the guarantee period and shall

be refunded only after the completion of the guarantee period.

3.3. The contract rate shall be for a unit of

one Square meter basis of complete item.

Detail Item Specification

Providing, erecting and fixing double coated I.S.I. Mark P.V.C. water tank of

required capacity each with all necessary fittings and connection etc. complete on

terrace as directed by Engineer in charge.

This work shall consist of furnishing and placing providing and fixing I.S.I.

mark PVC water tank with necessary G.I. fittings of the shape and dimensions

shown on the drawings and conforming to these specifications or as approved

by the Engineer in charge.

1.1 PVC WATER TANK

PVC Water tank of specified capacity and of I.S.I. mark of approved in liters

of approved make and quality equivalent to syntax product.

Net capacity shall be net volume of water stored between the lowest level of

overflow and lowest specified level.

Galvanize pipe nipple shall be of approved make and of best quality. Relevant

specification given in Booklet of Building specification shall be applied for the

execution of this item.

Ball valve shall be of approved make and of best quality. Relevant

specification given in Booklet of Building specification shall be applied for the

execution of this item.

1.4 CONNECTIONS

Connection shall be of approved make and of best quality. Relevant

specification given in Booklet of Building specification shall be applied for the

execution of this item.

2.0 WORKMANSHIP

Detail Item Specification

2.1 Tank shall be approved quality and as per IS standard make. Material used in

manufacturing tank shall be confirmed to relevant IS code. The material of

tank and lead and fittings which may come in contact of water should be such

that it does not impart any taste, colour or odour. It does not have any toxic

effect and it does not contaminate the water. Thereby making it unpotable,

2.2 The tank shall be fixed properly in a level position and making all required

necessary correction like inlet outlet flushing overflow and air vent. Tank

shall be satisfying the standards of public health.

3.0 MODE OF MEASUREMENT AND PAYMENT

3.1 The unit rate of PVC Water tank shall include the cost of all materials, tools

and plant required for lifting to required height with all lead and lift, placing

and fixing in position, all required specials and jointing adhesive compound,

finishing as per direction of the Engineer-in-charge, and all other incidental

expenses for producing PVC water tank work of specified diameter

complete the structure or its components as shown on the drawings and

according to these specifications, they shall also include the cost of making,

fixing and removing of all scaffolding and forms required for the work.

The rate of PVC Water tank shall include the cost of all labour, materials

tools and plant scaffolding and all incidental expenses as described herein

3.2 The PVC water tank work shall be measured for its volume to specified

capacity to those specified on plan or as directed. The rate shall be for a unit

of one litre basis.

3.3 The payment will be made on litre basis of the finished work.

Detail Item Specification

Applying general insecticide pest control treatment to floors, cupboards etc

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

part -II( (0.075% concentration by mass) is recommended 10.5mI chemical diluted

with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended

The Imidacloprid 30.5 SC shall be used for anti-termite treatment & shall confirm to the

relevant IS Code & of approved make.

The chemicals used for the Anti-termite treatment shall be only one of the following with

concentration shown against each in aqueous emulsion.

Chemicals Concentration

Imidacloprid 30.5 SC. 0.50% (By mass)

1.0 WORKMANSHIP

2.1 The chemicals barrier shall be complete and continuous under whole of the structure to be

2.2 The bottom and the sides of foundations up to a height of 30 cm from the bottom of

excavation made for masonry foundation and for basement column pits shall be treated

with the chemical Concentration by Weight 0.50 percent is recommended i.e one liter

chemical emulsion dilute with 39 liter of IS concentration total dilute concentration will be

40 liter inclusive of one liter chemical emulsion application at the rate of 7.5 Liter chemical

Sq.mt of surface.

2.3 The chemical treatment shall be carried out when the surface is quite dry. Chemical

treatment shall not be carried out when it is raining or when the soil wet with rain or sub

2.4 Once formed, treated soil berries shall be not disturbed. If by chance, treated soil barriers

and disturbed, immediately steps shall be taken to restore the continuation and

compactness of the barrier system.

2.5 The treatment against termite infection shall remain fully effective for a period not less

than 10 years from date of issue of the final certificate to completion of work. If at any time

during this period, any defects in treatment are revealed or any evidence of infection in

any part of the building or structure is noticed, the contractor shall be rectify the concerned

failure to do so, the Engineer—in—charge any get the same rectified through any other

agency at Contractor's risk and cost, any decision of Engineer—in—charge as to the cost

payable by contractor for the same shall be binding to the contractor.

2.6 A Guarantee bond on appropriately stamped paper shall be given by the contractor to the

Department in the manner and form prescribed below.

Detail Item Specification

FORM OF GUARANTEE BOND

l/ We (Contractor) here by guarantee that work will

remain unaffected an will not be in anyway damaged by termite or any other germs of similar

types. For a period for 10 years after completion of the work of anti-termite as per the terms and

conditions of the contract and damage that might be caused on account of termite and or other

similar type of germs and hereby Guarantee to make good any loss of damages suffered by the

Govt. of Gujarat and further guarantee to redo effective work without claiming any extra cost.

2.7 This guarantee shall remain in force for the period of 10 years from the completion of the

work under the contract and lit shall remain binding to the contractor for period of

2.8 The deposit at the rate of 50% of the cost of this item from the running and final bills shall

be recovered and remained for the first one year after completion of the work or at least on

monsoon season passed whichever is later and 10% shall be retained for the balance o

the guarantee period land shall be refunded only after completion of the guarantee period.

3.0 MODE OF MEASUREMENT AND PAYMENT

3.1. The length and breadth shall be measured correct to a cm. as per the dimensions of

sanctioned plans. No deduction shall be made nor extra paid for any opening for pipes etc.

up to 0.1 .sq.mt. The rate shall include the cost of all labour and materials required for the

operation involved for satisfactory completion of this item. The sides of the trenches

cm, each side and bottom shall be measured under this item.

3.2. The rate shall be for a unit of One sq. meter.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As P

6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

The work shall be executed as per specification of Item No. 18 except the work is for

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-lI

Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical I Sqm of surface is recommended as per I.S

Detail Item Specification

Providing and fixing Safety grill / Compound wall Gate of required pattern for

window / door using 16mm diameter M.S. polished bars and rectangular CRC pipes

of size 50 x 30 x 2mm at required spacing as per design and hold fasting with coach

bolts including applying a priming coat of red lead paint and two coats of oil

painting etc. complete for all floor.

1.0 Scope of work : The item of safety grill required pattern for windows / Door using

16mm dia. comprises of M.S. polished bars, CRC pipe and oil painting work.

2.0 Materials: The M.S. bars, CRC pipe and all the fixture and fastening shall be of

standard approved quality.

3.0 Workmanship : The item covers the requirement of preparation of Safety grills of

required pattern for windows / Door using M.S polished bars, rectangular CRC

pipes of size selected by Architect or Engineer in charge at required spacing as

per design and hold fast with coach bolts including one coat of primer and two

coats of matt finished oil painting shall be of approved quality by the Engineer-in-

4.0 Mode of measurements and Payments:

The rates for safety grills for windows / Door shall be includes cost of providing all

required materials and painting etc. keeping in position as directed.

The dimension of the safety grill for windows Door shall be measured clear size of

the windows / Door.

The rate shall be for a unit of One Kg.

Detail Item Specification

Providing and fixing extruded colour anodized aluminium two track sliding window having

aluminium section having outer frame for bottom member of size 92*00 x 31.75 x 1.50 mm

size weight of 1.248 KG I Mtr and outer frame for top and sides members size 92.00 x

x 1.50 mm size weight of 1.06 KG Mtr, for shutters using top and bottom size

1.50 mm size weight 0.642 KG I Mtr & interlock member size 50 x 29 x 1.50 mm size weight

0.697 KG / Mtr & handle member size 50 x 20 x 1.50 mm size weight 0.571 KG I Mtr with

mosquito net shutter work etc. complete or as directed.

1.1 Aluminum standard section

I.I.I Window having extruded alluminium colour anodized section

Aluminum alloy used in the manufacture of window section shall confirm to I.S. designation HEA-

wp of I.S. 733-1975 and also designation WVG-WP of I.S. 1285-1975 section shall be as

specified in the drawing and design.

The work shall be included standard window having extruded colour anodized aluminium two

track sliding window having aluminium section having outer frame for bottom member of si

92.00 x 31.75 x 1.50 mm size weight of 1248 KG / Mtr and outer frame for top and sides

members size 9200 x 31.75 x 1.50 mm size weight of 1.06 KG

for shutters using top and

bottom size 50 x 20 x I .50 mm size weight 0.642 KG / Mtr & interlock member size 50 x 29 x

& handle member size 50 X 20 x 1.50 mm size weight 0.571 KG

mm size weight 0.697 KG

Mtr with mosquito net shutter work etc. complete or as directed by Engineer in charge.

All sections shall be free from any scratches or holes or any damages on surface. All section

shall have finished luster surface on all sides

1.2 Glazing clips: Glazing clips (structural mosquito net) shall be of size as directed by the

Engineer in charge around the glass allover shall be free from any scratches or holes or any

damage of on surface all section shall have finished luster surface on all sides.

1.3 Rubber Gasket

Rubber gasket shall be of approved make shall be free from any scratches or holes or a

damages on surface, and shall have finished luster surface on all sides.

Hinges shall be of approved make shall be free from any scratches or holes or any damages on

surface and shall have finished luster surface on all sides.

Handles shall be of approved make shall be free from any scratches or holes or any damages on

surface, and shall have finished luster surface on all sides.

All Bolts shall be of approved make shall be free from any scratches or holes or any damages on

surface and shall have finished luster surface on all sides.

Detail Item Specification

Stoppers shall be of approved make shall be free from any scratches or holes or any damages on

surface, and shall have finished luster surface on all sides.

Product is from reputed company having ISO 9001-2000 certificate and with three years

performance guarantee.

2.0 WORKMANSHIP

The work of window having extruded alluminium colour anodized section frame shall be done

with extreme finishing the partial board shall be fixed in the bottom panel and glass shall be fitted

on top panel as directed by Engineer in charge, using glazing clips and rubber gaskets as

required. All the fixtures and fastenings shall be fitted at right place and as directed by Engineer in

charge floor spring shall be fitted properly so as to align the window properly and shall be given

trial of opening and closing properly.

3.0 Mode of Measurement & Payment

3.1. The unit rate of window having extruded alluminium colour anodized section frame shall

include the cost of all materials, cost of anodizing, cost of all necessary fixtures and fastenings,

labour charges for fixing frames, shutters and fixing the window in wall at the place shown in

drawing and as instructed by Engineer in charge, all tools and plant required for assembling and

fixing in position, finishing as per direction of the Engineer-in-charge, and all other incidental

expenses for preparing frame and shutter of specified size to complete the structure or its

components as shown on the drawings and according to these specifications. They shall also

include the cost of making, fixing and making walls good by plaster patch colour etc as required.

3.2. The Window shall be measured for its improvising and fixing window having extruded

alluminium colour anodized section frame having heavy handle, heavy lock, bracket, stoppers,

mosquito net shutter work panel of approved make with S.S. fixtures and transparent silicon

Net fixings to from as detail including PVC T in frame silicon based linings handles, locks two nos.

PVC gasket screws aluminum joints special runner etc. complete.

(7 3.3 The rate shall be for a unit of

one square meter.

Dated Signature of Deputy E ecutive Engineer Executiv Engineer

the Contractor (R&B) Sub-Division, (R&B) Division,

KHAMBHAT. ANAND.

Name of Work :- State Tax Office at Petlad [Reparing of Toilet Block, Furniture, Plumbing work, Water

Proofing, Pest control treatment, Door- Ventilation, Street ligth and Other Misc. Work.]

: BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 cr.)

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

1. 15.53 Providing and fixing Impulse Blackout Roller Blinds 2824.47 Rupees Two Smt.

with fabric of 0.53 mm thickness and top channel of Thousand Eight

non-rusting aluminium alloy with 1.25 mm thickness

and bottom channel of 1.50 mm thickness and

And Paise Forty

mm diameter. Tilt channel of ABS plastic with 1.50 mm Seven Only

polyester cord with 4.50 mm balls with stop lock

arrangement including all necessary fixture, fasteners,

fittings, labour material machinery etc. complete of

premium quality and as selected and directed by

Engineer-in-charge.

2. 8.00 Providing and supplying High Back Premium 14968.20 Rupees Nos.

executive Revolving Chair Sigma chrome Base with

Knee Tilt Synchro Mechanism with any Position back

Lock, Seat and Back Made from High Density U -

Eight And Paise

Foam, Arms Aluminium Die Casted with Cushion

Pad including all materials and labour etc. complete

as directed by Engineer in charge. Size : max. Height:

1290 mm to Min. 1170 mm, Seat: 530 mm x

mm, back 740 mm x 500 mm. (Model Zoro 451)

3. 1.00 Providing and supplying Wooden Table having 40 19967.70 Rupees Nos.

thick top overall thickness made from 18 mm Nineteen

thick Thousand Nine

MR grade plywood, top and side finish with

mm thick laminate both side (inside and outside) to Seven And

be laminated and top back side 0.8 mm balancing Paise Seventy

laminate including teak wood border patty of size 40 only

mm x 12 mm with appron to be made from 18 mm

thickMR grade finish with 1 mm thick laminate and

whole table having MS CRCA Pipe framing of 50 mm

x 50 mm x 1.6 mm size and 50 mm x 25 mm x

mm size finished with epoxy powder coated of 50-

micron thickness as per drawing / photograph and

details including all materials and labour etc.

complete as directed by Engineer in charge. (with

T.W. border with melamine polish) Table minimum

size: 2400 mm x 900 mm x 750 mm.

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

4. Providing and supplying Side unit with top 37 mm 7878 oo Rupees Seven Nos.

overall thickness made from 18 Thousand Eight

mm thick MR grade

mm thick laminate on top with

melamine finished polish. Side and drawer made of

18 mm thick MR grade plywood with 4 mm thick

veneer with melamine finished polish and inside

mm thick balancing laminate of approved shade.

Teak wood border with melamine finished polish of

specified size to be provided all around the borders

of plywood. Drawer run on heavy duty telescopic

channel with heavy duty lock with two keys and

shutter fixed with auto hinges, including all

necessary fixtures and fastening as approved and

back of the unit with 6 mm thick marine grade

plywood with 0.8 mm thick laminate of approved

shade with nylon bullet including all materials and

labour etc. complete as directed by Engineer in

charge. Side Unit minimum size: 900 mm x 450 mm x

5. .00 Providing and supplying Three-Seater Sofa of 23735.00 Rupees Twenty Nos.

premium make with structure made from 18mm MR Three Thousand

grade plywood supported with Maranti Solid wood,

Thirty Five Only

back side and curved part covered with 3mm flexi

arm made from 12mm thick MR grade

plywood supported with maranti solid wood. Elastic

Belt,75mm board and 2.25 mm thick elastic

webbing stapling in seat frame at 100 mm centre to

centre distance, belt fastener in X and Y axis of seat,

elastic belt elongation 45 perc. tensile strength

kg. Foam 100 mm x 40 density Premium Quality

foam covered with 25mm x 32 density super soft

Premium Quality Foam for soft touch filling in seat.

50 mm x 40 density Premium Quality foam covered

with 25mm x 32 density super soft Premium Quality

foam for soft touch filling in back. Stitching work

done with well-known German brand (Aman /

Guterrnann) Thread. Nylon and Polyester thread

used as per application. 50 mm x 50 mm Wooden

Legs applied with polishing. Including all materials

Hardware and labours etc. complete as directed by

Engineer in charge. (HOF Make: Cierzo 3-Seater Sofa

or equivalent premium make) Size: minimum

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

6. .00 Providing and fixing wash down water closet 8450;67 Rupees Eight Nos.

(European type W C pan) with integral P and S trap Thousand Four

including jointing the trap with soil pipe in cement

And Paise Sixty

mortar 1:1 (1 cement five sand) including providing Seven Only

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing

tank with a pair of C I or MS bracket with complete

fitting such as PVC valve siphon 15 mm dia brass

ball valve with polythene float CP brass handle

unions including Hand Faccet and couplings for

connection with inlet out let and over flow pipes

dia porcelain enameled flush bend including

cutting holes in walls and making good the same

connection the flush bend, Flush Tank capacity of

Lit. with cistern and closet vitreous china.{Hindustan,

Cera, Parryware or equivalent

7. 3.0 Providing and fixing wash basin (Hindware, Perry, 8397.37 Rupees Eight Nos.

Cera or equivalent approved quality) with single hole Thousand Three

Table top for pillar tap with C.I. or M.S. brackets

painted white including cutting holes and making Paise Thirty

good the same including fittings such as 15 mm Seven Only

pillar tap, chromium plated bottle trap, C.P. brass

waste pipe and 15 mm stop cock, M.I. fisher union

(ii) Flat back wash basin 500mm x 400mm size

including all necessary pacca fittings etc. complete

8. Providing and fixing Urinal or approved quality 1074.86 Rupees One Nos.

including conecting the Urinal with waste pipe tap

etc. complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm. Eighty Six Only

9. 1.00 Providing and fixing Urinal of approved quality 1618.51 Rupees One Nos.

including Thousand Six

connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm. Paise Fifty One

10. 3.0 Providing and fixing chromium plated brass half trun 263.77 Rupees Two Nos.

flush cock of approved quality including fixing in

Three And Paise

pipe line etc. complete.(ii) 25mm dia.

11. Providing and fixing down bib taps of 186.83 Rupees One Nos.

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia.

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

12. 1.0 Providing and fixing 600mm x 450mm bevelled edge 859.41 Rupees Eight Nos.

mirrror of superior glass mounted on 6mm thick A.C. Hundred Fifty

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

13. 4.0 Dismentling doors, windows, ventilators etc. (wood 192 9 Rupees One Nos.

or steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

14. o. Providing and fixing standared extruded of 1175.56 Rupees One Smt.

alluminium section of size

63mm x 38.10mm x Thousand One

1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with

mm thick And Paise Fifty

frosted glass as details etc complete for Ventilation Six only

15. 3. 4 Providing and fixing 35 mm thick shutters for Doors, 5338.30 Rupees Five Smt.

windows and clerestory windows including Indian Thousand Three

teak wood frames 10 cm x 7 cm. size including black Hundred Thirty

Eight And Paise

enamelled iron oxidixed fixtures and fastenings Thirty only

including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully

16. Providing and laying water proofing treatment on

terrace with broken China mosaic tiles flooring over

1099.72Rupees One

average 40 mm C.C. 1:2:4 bedding for maintaining

slope for plain and curve surface and

mm to 20 Seventy Two

mm of broken piece of ceramic / glazed tiles (one Only

more colour as directed) to be laid over cement

mortar bedding of C. M. 1:3 (1 cement : 3 sand)

contain one KG of water proofing materials per bag

of OPC at plain or / and slops and to be tempered to

bring mortar ceramic up to surface with using white

cement and colour pigment, including rounding of

junctions and extending them up to 15 cm along the

wall and curing with bends

any patterns or design as

per drawing and cleaning by using oxalic acid etc.

17. 3,50 .00 Providing erecting and fixing double coated ISI 3.95 Rupees Three Litter

water tank of required capacity each with all And Paise

necessary fittings and connection etc. complete on

18. 170 7 Applying general insecticide pest control treatment

99/63Rupees Ninety Smt.

to floors, cupboards etc including, labour materials Paise

etc. complete. Using Imidacloprid 30.5 SCas Per IS

concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

19. 350.40 Carring out plinth treatment to post construction / 12 .35 Rupees One Smt.

existing structure by spraying chemical solution for Hundred

termite control treatment including labour and

And Paise Thirty

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concrentration inclusive of one

litre chemical emulsion appication at the rate of

Litre chemical / Sqm of surface is recommended as

20. 29 .25 Providing and fixing Safety grill / Compound wall 153.66 Rupees One Kgs.

Gate of required pattern for window / door using

// Hundred Fifty

Three And Paise

16mm diameter M.S. polished bars and rectangular

CRC pipes of size 50 x 30 x 2mm at required spacing

as per design and hold fasting with coach bolts

including applying a priming coat of red lead paint

and two coats of oil painting etc. complete for all

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item estimated according to

Item of Work Unit

No but may be In Figures estimated

more or less Rs. Ps. quantities

21. 34. 2 Providing and fixing extruded colour anodized 20 .52 Rupees Two Smt. 68,97 .09

aluminium two track window

sliding having Thousand

aluminium section having outer frame for bottom

Paise Fifty Two

member of size 92.00 x 31.75 x 1.50 mm size weight Only

of 1.248 KG / Mtr and outer frame for top and sides

members size 92.00 x 31.75 x 1.50 mm size weight of

1.06 KG / Mtr, for shutters using top and bottom size

50 x 20 x 1.50 mm size weight 0.642 KG / Mtr &

interlock member size 50 x 29 x

0.697 KG / Mtr & handle member size 50 x 20 x

mm size weight 0.571 KG

/ Mtr with mosquito

shutter work etc. complete or as directed.

Rupees Five Lakh(s) Sixty Seven Thousand One Hundred Ninety Two And Paise Forty Only

I/We am/are willing to carry out the work at••• % above/below percent(Should be written in

figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as

Estimated amount put to Estimated amount put to

Deduct ...... ....

% below .... Add .

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Dated Signature of Deputy ecutive Engineer Executi Engineer

the Contractor. (R&B) Sub-Division, (R&B) Division,

KHAMBHAT. ANAND.