REPAIR/REPLACEMENT OF GARDEN LIGHTS AT NASA,CERA AND OTHER CERTAIN LOCATIONS AT INA EZHIMALA AND REPLACEMENT OF NON LED LIGHTS AT INHS NAVJIVANI COMLPEX ETC AT INA EZHIMALA

Amount

Supply and fix in replacement of old unserviceable conventional post top lantern fitting with IP 65 rated heritage type LED post top luminaire, 20 Watts, Warm white, including Surge protection device complete all as specified and directed by Engineer-in-Charge. Make: Crompton Cat part No. LPTH-20-WW or equivalent make approved by GE.

Supply and fix in replacement LED bollard light fitting robust type with soft 360 light 10W with IP 65 proctection complete all as specified and directed by Engineer-in-Charge. Make: Crompton Cat part No.LBLTW-10-WW or equivalent make approved by GE.

Supply and fix in replacement of decorative light pole, black painted galvanised pole in different section with gold colour painted decorative rings and decorative base ring including base plate and foundation bolts.including keeping aside the existing cables and reconnecting the same after fixing complete all as specified and directed by Engineer-in-Charge. Make: Bajaj Cat pat No. BJPL01 300 or equivalent make approved by GE.

Supply and fix in replacement of decorative post top,energy saving,enviormental friendly, spun aluminium landscape luminaire with high power LEDs as light source of 40 watt suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make: Crompton Cat part No. LPT0 40 CDL or equivalent make approved by GE.

Material and labour for mass filling in foundation/coping/wall with PCC 1:3:6 (using 20 mm graded aggregate) type C1 including necessary form work complete all as specified and directed by Engr in charge.

Supply and fix in replacement of Copper cable flexible 2.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.

Material and labour for sub main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 2.5 sq mm (nominal area) multi-stranded copper conductor drawn through and including medium grade PVC Conduit of suitable size with ISI marked incl all specials like joint elbow, Tee, junction , bend etc and provision of one runs of FR grade 1100 V rated PVC insulated multistranded copper conductor single core 2.5 sq mm for earth continuity all as directed. Note: (i) Three runs of wire and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Material and labour for taking down the unserviceable LT UG cable of size of 6Sqmm to16 sqmm 4 core including removing electrical connection and keeping side serviceable cable including removing cable protection cover etc complete all as specified and directed by Engr- in- charge.

Exacavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard and dense soil all as specified and as directed by Engr-in-charge. Note: The excavation has to be done manually only.

Returing and filling in including spreading levelling watering and well ramming into layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engr-in-charge.

Removal of excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point as directed by Engineer-in-Charge.

Supply and spreading riddled soil as earth cushioning to UG cable by using IS sieve to separate the composite particle/ roots etc. and refilling/ spread in trenches as cushioning and rammed down to form a solid bed complete all as specified and directed by Engineer-in-charge. Note :- Punned thickness only will be measured and paid. (ii) Excavated approved soil shall be riddled by using sieve to separate composite particles as per IS.

Supply and lay PCC un- reinforced pre cast cable cover of size 250 mmx150mmx40mm , class LV, type I, flat for cable protection complete all as specified and directed. Note: Contractor has to produce cable cover test certificate from the manufacturer.

Re-laying of PCC un reinforced LTcable cover of size 250 mmx150mmx40mm obtained from taking down complete all as specified and directed by Engr- in- charge.

Material and labour for relaying cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall size up to 16 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated heavy duly galvanised steel strip armoured LT,1100 volt grade with aluminium conductors of size 16 sqmm,4 core complete all as specified and directed by Engineer-in-Charge.

All as per item no. 16 above but size of 10 sqmm 4.0core complete all as specified and directed Make Havells, RPG, Polycab.

Supply and fix in replacement of conventional flood light fitting into LED fittings,die cast aluminium IP 66 120 W LED flood light luminaire complete all as specified and directed by Engineer-in-Charge. Make: Crompton Model No LFLN 120 CDL/60-M or equivalent make approved by GE.

Supply and fix in replacement of conventional flood light fitting into LED fittings,die cast aluminium IP 66 50 W LED flood light luminaire complete all as specified and directed by Engr in charge. Make:Crompton Model No. CFS-504-50-57-60D-SL-GL-NSG or equivalent make approved by GE.

Supply and fix in replacement weather proof junction boxes made out of Thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts. Box Should be able to accommodate two 16Sqmm cable and The box should have two cable entry complete all as specifed and directed by Engineer-in-Charge.

Material and labour for cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard standing using pre mix bituminous as required at site to match with the existing surface Complete all as specified and directed by Engineer-in-Charge. NOTE: Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.

Supply and fix in replacement of GI tubing light grade 50 mm nominal dia in trench/road/pole for cable protection complete all as specified and directed. Make: TATA/ Jindal/ Surya/ Zenith.

Supply and fix in replacement of conventional bollard light fitting with LED bollard light fitting with soft 360 light output with IP 65 proctection complete all as specified and directed by Engineer-in-Charge. Make: Crompton Cat part No.LBLTW-10-CDL or equivalent make approved by GE.

Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs,glands XLPE insulated armoured LT1100 volt grade with copper conductors of size 2.5 sqmm 4 core Complete all as specified and directed by Engineer-in-Charge.

Neptune Engineers and Builders

ROTECH ENGINEERS AND BUILDERS

M/s.Rejoy Constructions

pk janardhanan

Benchmark Engineers and Contractors

GMS Builders

Gates Infra Construction Co

KDR CONSTRUCTION