Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC H NO 4 ANAND VIHAR KANSAPUR ROAD YAMUNA NAGAR HARYANA | YAMUNANAGAR | HARYANA | 133103 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.1 L+₹6.3 L (40.0%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹25.8 L+₹10.1 L (63.8%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹26.5 L+₹10.7 L (67.7%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
CERTAIN REPAIRS TO JOINERY, ALUMINIUM PARTITIONING AND OTHER ALLIED WORKS IN ZONE-I, ETF, AAG AND DOMESTIC AREA AT TBRL RANGE RAMGARH
2023_MES_595755_1
GE (I) R AND D/CHD-17/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹40,000
Yes
6 Jul 2023
17 May 2023
16 Jun 2023
17 May 2023
14 Jun 2023
31 May 2023
18 May 2023 - 30 May 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed.
All as per serial item No 1.00 above but exc. 1.5 Sqm and n.exc. 4 Sqm each.
Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed.
All as per serial item No 2.00 above but exc. 1 Sqm and n.exc. 2 Sqm each.
Cutting holes for inserting hold fast and making good dismaltled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1as required exc one brick but not exc two bricks complete all as specified and directed.
Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.
Supply and fixing for factory made solid PVC chowkhats or frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and direcrted.
Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.
Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed.
Supply and fixing for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazeed or gauzed) complete all as specified and directed.
Supply and fixing for steel ventilator with top hung shutter includig hinges steel peg stay, handle complete all as specified and directed.
Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0. complete all as specified and directed.
Supply and fixing for 105X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed.
Supply and fixing for 125X60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members all as specified and directed.
Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing for 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Providing and fixing Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS:14587 with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately) complete all as specified and directed.
Supply and fixing for 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
Supply and fixing for SS barrel tower bolt stove enameled black with bright bolt 200mm long complete all as specified and directed.
Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed.
Supply and fixing for aluminium anodized door stopper 140 mm long overall length complete all as specified and directed.
Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed.
Material and labour for 18mm thick pre laminated high density high moisture resistances (HDHMR) board any colour / sunmica finished wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) completed all as specified and directed. (Note :- Design and colour approved by GE)
Supply and fixing for 18/19 mm Block board, grade 2 quality, interior grade, commercial type complete fitted in cupboard etc complete all as specified and directed.
Material and labour for 0.9 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved complete all as specified and directed
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 13 sqcm n.exc. 25 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.
Supply and fixing for 2nd class hard wood plain fillets sectional area exc. 3sqcm n.exc. 6 Sqcm clean sawn, secured with nails or brads complete all as specified and directed.
Supply and fixing for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel bright finished. complete all as specified and directed.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc.Triple strip vertical type complete all as specified and directed.
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete all as specified and directed.
Supply and fixing for continuous (piano) hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick complete all as specified and directed.
Supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, complete all as specified and directed.
Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
All as per serial item no 34.00 above but fixed in repairs.
Supply and fixing for in repairs 25mm dia stainles steel 304 (0.7mm to 2mm thick) fancy type curtain rods with fixing brackets, stops/knobs, roller etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed.
Supply and fixing for 3.0mm thick ordinay sheet glass in squares n.exc. 0.5 Sqm each pane with oil putty complete all as specified and directed.
Supply and fixing for figured glass, pin head type and glazing with oil putty in squares n.exc. 0.5 Sqm each of thickness 3.0mm. complete all as specified and directed.
Material and labour for anodized powder coated aluminium standard section of size 101.60X44.45X2.0mm thick for door/window frame including jointing aluminium cleats of suitable size and lugs, etc complete all as specified and directed.
Material and labour for anodized powder coated aluminium door shutters single/double leaf, side hung type, with top and lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shutter complete all as specified and directed. (Prelaminated board and glass to be measured & paid separately).
Supply and fixing for aluminium anodized powder coated window shutters, powder coated, side hung type without sash bars, aluminium section 83X44.45X2mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium builders hardware such as peg stage 150mm long -01 No, aluminium handles of size 100mm-01 No as each shutters, window shutter to be fitted with glass panes complete all as specified and directed. (glass panes to be measured & paid separately).
Supply and fixing for double action floor spring for aluminium door shutters fixed in repairs complete all as specified and directed.
Supply and fixing for in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 complete all as specified and directed.
Supply and fixing for in repairs 100mm size mortice locks of aluminium body, 4 levers suitable to aluminium door shutters complete all as specified and directed.
Material and labour for for aluminium anodized powder coated section of 101.60mmX44.45mmX2mm for aluminium partitions, powder coated, fixed in position complete all as specified and directed.
Supply and fixing for in repairs powder coated aluminium grills, fixed to aluminium windows/partitions/door frame including all fixing arrangements like aluminium channels, screws etc complete all as specified and directed.
Supply and fixing for in repairs ventian blinds, sheer demout blinds of with aluminium roller tube, cassette colour white fabric weight 140gms, light control 70% fabric composition 100% polyester complete all as specified and directed.
Supply and fixing for in repairs ventian blinds, vertical type, complete all as specified and directed.
Supply and fixing for plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/ windows/ partitions fixed with aluminium glazing clips & rubber beading complete all as specified and directed.
All as per serial item no 49.00 above but wired glass 6.4mm thick.
Supply and fixing for 12 mm Block board, grade 2 quality, interior grade, commercial type complete fitted in door panels, partitions etc complete all as specified and directed.
Supply and fixing in repair 12mm thick toughened glass for paration walls/ door with and including making holes for fixing fixtures etc complete all as specified and directed
Supply and fixing for stainless steel clamps with and including fastners suitable for toughened glass partition/doors complete all as specified and directed
Supply and fixing for stainless steel pivot (75mm or any other size as required ) with and including suitable fixing arrangment for toughened glass doors complete all as specified and directed
Supply and fixing for stainless steel handle (600mm size as required ) with and including suitable fixing arrangment for toughened glass door complete all as specified and directed
Supply and fixing for stainless steel mortice lock vertical type (100mm or any other size as required ) with and including suitable fixing arrangement for toughened glass doors complete all as specified and directed
Supply and fixing for stainless steel door stoper 150mm (or any other size as required with rubber bottom suitable for fixing to toughened glass doors complete all as specified and directed
Supply and fixing in repair door closer ( aluminimum die cast body) hydraulically , regulated, designation No - 2 , unversal type, suitable for door shutterof 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.
Dismantling existing wall/ceiling board any type including wooden framed work/GI frame work of any size & specifications complete all as specified and directed.
Supply and fixing for PVC wall Lining consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading complete all as specified and directed.
Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but including the cost of painting with 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996
Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed.
All as per serial item no 61.00 above item but gear type operated by handles --ditto--.
Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair. complete all as specified and directed.
All as per serial item no 62.00 above but 1.25mm thick gear operated type with level gear box & crank hands.
Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed..
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 64.00above item but except brick complete all as specified and directed.
Taking down cement plaster on brick walls including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Material and labour for Rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces complete all as specified and directed..
Material and labour for external plastering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound
Material and labour for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces complete all as specified and directed.
Material and labour for preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, white primer complete on walls complete all as specified and directed.
Material and labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed.
Supply of Silicon sealant addhessive (240 ml of each pack)
Supply and fixing for WPC louver panel of thickness ranging from 15mm to 25 mm of different shade fix to wall using its accessories incl matching WPC beading etc complete all as specified and directed.
Providing and applying in position crystal quality clear Privacy film in glazing .Note rate to included plotter cutting and installation of privesy film as per design and approved by Engr-in-Charge
Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed.
Om Sai Ram Builders
SONA BUILDERS
Shivalik Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .