Annual Maintenance contract for Institute Buildings and Staff quarters residential colony at CSIR-NIO, Dona Paula, Goa

Repairs to plaster in patches of 2.5 sq.mt.and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead With cement mortar 1:4(1 cement:4 fine sand) (cement make:-ACC/Ultratech)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (make:-Birla white cement putty)

Providing & laying cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded granitic or basaltic stone aggrt.20 mm nominal size)excluding cost of centering ,shuttering and finishing in: All works upto plinth level (cement make:-ACC/Ultratech)

Half brick masonary with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement:4 coarse sand):(cement make:-ACC/Ultratech)

a)In foundation and plinth

b)Upto floor V level

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-1:1 1/2:3 (1 cement:1 1/2 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size): (cement make:-ACC/Ultratech)

All works upto plinth level

in beams, suspended floors, roofs,having slope upto 15*landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircase upto floor five level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:1:4:8(1 cement:4 coarse sand (zone-III):8 graded stone aggregate 40 mm nominal size): (cement make:-ACC/Ultratech)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:1:2:4(1 cement:2 coarse sand (zone-III):4 graded stone aggregate 20 mm nominal size): (cement make:-ACC/Ultratech)

Providing & appying white cement(Make:-JK white/Birla)

Providing and laying ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer)of 1st quality confirming to IS:15622 of approved make in colours such as white, Ivory, Grey, Fume Red brown, laid on 20 mm thick cement mortar 1:4(1 cement:4 coarse sand),Jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment etc.,complete (make:-Kajaria/Orient/Somany)

Providing and laying ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer)of 1st quality confirming to IS:15622 of approved make in colours such as white, Ivory, Grey, Fume Red brown, laid on 20 mm thick cement mortar 1:4(1 cement:4 coarse sand),Jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment etc.,complete (make:-Kajaria/Orient/Somany)

Earth work in excavation by mechanical means (hydraulicexcavator)/manual means over areas(exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-in-charge

All kinds of soil

hard rock where blasting prohibited

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Providing and fixing PTMTpillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms (Make:-ARK/Omco/Crabtree)

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge(Make:-ARK/Omco/Crabtree)

Providing & fixing CP brass waste coupling heavy(Make:-Nirali/ARK)

Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete.

Finishing walls withAcrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing PTMTgrating of approved quality and colour. Circular type 100 mm nominal dia

Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete, without door:110 mm dia.(ISI marked)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (make:-Cera/Parryware)

Providing and fixing C.P.brass shower rose with 15 or 20 mm.Inlet:100 mm dia.(Make:-ARK/Omco/Crabtree)

Providing and fixing CP brass push cock for urinal of approved make including fittings.(Make:-ARK/Omco/Crabtree)

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30cm length

15 mm nominal bore with 45 cm length

Providing & fixing drain PVC waste pipe (flexible) for sink/basin with fittings (ISI marked)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualit

Rectangular shape 600x450 mm internal dimensions

Square shape 450 mm internal dimensions

Providing & fixing rigid PVC pipe 10kg/cm2 including fittings complete socketed(Make:-Supreme/ Prince/ Finolex/ Astral)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting p an (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet :250x130x30 mm

Cleaning and removing of wash basin/sink and its pipeline

Cleaning and removing of bathroom/kitchen and its pipeline

Cleaning and removing of manholes/inspection chambers and its pipeline

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters

Providing and fixing teak wood veneer sheet for glazed door shutters with fevicol and fixtures

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

125x70x4 mm (ordinary type)

100x70x4 mm (ordinary type)

75x40x2.5 mm (ordinary type)

Providing and fixing bright finished brass door latch with necessary screws etc. complete :250x16x5 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass handles with screws etc. complete:100 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete :

Providing & fixing anodised aluminium hooks and eyes

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete

Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing door viewer in main door

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm).

Repairing of old window shutter of any size without fittings

Repairing of old door shutter of any size without fittings

Repairing of night latch

White washing with lime to give an even shade :Old work (two or more coats

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Painting the fans with one or two coats with oil paint including cleaning scraping etc.complete(Make:-Asian/ICI/Berger/Nerolac)

Polishing on wood work with ready made wax polish of approved brand and manufacture :Old work

Providing and fixing mosquito nets netlon or equivalent make over the window frame including fixing Velcro tape in the wooden frame and net with screws /nails etc.(Make:-Netlon)

Labour charges for engaging on daily wage

a)Helper

b)Plumber

c)Carpenter

d)Mason

e)Painter

Miscellaneous work

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Repairing (Removing and re-fixing ) of bib cock/pillar cock with replacing of washer to arrest the leakage

Repairing of flush tank with replacing minor fittings and fixtures to arrest the leakage

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 600 x 20 mm size (ISI marked)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall

a)15 mm dia nominal bore

b)20 mm dia nominal bore

c)25 mm dia nominal bore

d)32 mm dia nominal bore

e)40 mm dia nominal bore

f)50 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

a)15 mm dia nominal bore

b)20 mm dia nominal bore

c)25 mm dia nominal bore

d)40 mm dia nominal bore

e)50 mm dia nominal bore

f)80 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc.,removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account

Cleaning of under ground sump, Over Head R.C.C.Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a) 15mm nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

d) 32mm nominal bore

e) 40mm nominal bore

f) 50mm nominal bore

g) 65mm nominal bore

h) 80mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

a) 15mm nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

Providing and fixing gun metal full way valve (ISI marked)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching ad refilling etc (external work) (high density): (make:-Supreme/Prince/Finolex/Astral)

25mm nominal bore

32mm nominal bore

40mm nominal bore

50mm nominal bore

Providing and fixing Sintex tank covers with CP brass screws to watertank complete

Providing and placing on terrace roof of floor two polythene loft watertank having ISI mark 450 Litres (make:- Sintex/Shakti)

Providing and placing on terrace roof of floor two polythene loft watertank having ISI mark 500 Litres (make:- Sintex/Shakti)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing first class marine ply with one coat primer and two coats of oil paint (make:-Duro/Century/Greenlam/National)

6mm thick

12mm thick

16mm thick

18mm thick

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wood 50x12 mm

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade,colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.With granite stone of area less than 0.50 sqm.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

Engaging manpower

Pump operator with electrical knowledge

RCC Repairs:Surface preperation :All delaminated concrete should be chipped. The chipping should be done to a depth of 25 mm behind the reinforcement and shall continue along the lenth of the reinforcedment till an un coroded area is reached . The exposed reinforcement shall be throughly cleaned to remove the corrosion scales either by sand blasting or by emery cloth. The cost is inclusive of material,labour ,necessaray tools etc.complete.

Applicatiomn of anti corrosive primer:Providing & applying 2 coats of a two component zinc rich anti corrosive primer Nitozinc Primer of Fosroc Chemicals (india) Pvt.Limited, contaning at least 90% of zinc and giving a dry film thickness of at least 40micron to the reinfprcement bars .THE primer should be applied according to the manufacturer instruction and as per direction of tghe enginner incharge. Special care should be taken to apply NITO ZINC PRIMER behind the bars.The cost is inclusive of materials scaffloding ,labour ,Painting brush etc complete.

Application of Polymer based primer coating for the old concrete surfaces prior to plastering /concreting:Providing & applying one primer coat of Nitobond SBR of Fosroc Chemicals(India)Pvt.Limited mixed in the ratio of 1:1:3(SBR:Water:Cement)Nitobond SBR and water shallbe mixed the cement to the brushable consistent for the bonding purpose. The cost is inclusive of materials,Labour,and necessaray tools etc .complete.

Application of Polymer based CM Plastering on primed surface:Providing and applying 18 mm thick polymer modified 1:4CM Plaster using Nitobond SBRof Fosroc Chemicals?(India)Pvt.Limited mixed in the ratio of 1:5(SBR:Water).The plastering is to be carried out in two layers of 12 mm and 6 mm respectively.Necessaray key to be provided on masonary surface prior to plastering . The entire syste m is to be cured in accordance to the manufacturers specification&Engineer in charge . The cost is inclusive of material s,labour Necessaray tools etc ,complete.

Crack Filling:All the cracks to be sealed shall be saw cut or Chiselled to form a Vgrooveof required dimension but not exceeding 30 mm width. The grooves shall be cleaned to remove all the loose particles ,dust, etc and shall be sprinkled clean water before applying the sealling mortar Renderoc CS Single part ,non shrink cementitious ,crack sealer for the plaster,masonry and concrete of fosroc chemicals (I) Pvt Ltd lt shall be mixed with the proportion of 1 part of water top 2.5 -3 parts of Renderoc CS ,by volume.Through mixing should be carried out till a smooth homogenous mixture is obtained. All the filled grooves are to be cured for a period of three days.

Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement

Providing & fixing plastic ball to ball valve

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates(2004)Vol & II including all taxes, transportation, scaffolding & handling etc.complete as per direction of the Engineer-in charge:window with two sliding shutters using 18mm series shutter section/openable windows/door shutters/partitions.(make:-Jindal/Hindalco)

a)Acrylic sheet

b)Plain glass

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Laterite masonary in neatly dressed stones for 23 cms th.masonary walls in c.m.1:4(1 cement:4 coarse sand in foundation upto plinth level (cement make:-ACC/Ultratech)(Rate Rs.5116/- + 14.05% GST)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level Thermo Mechanically Treated bars of grade Fe-500D or more

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia.pipes

20 mm nominal outer dia.pipes

25 mm nominal outer dia.pipes

Providing 25 mm th. Cuddapah slab machine cut & polished on either side in partitions including making necessary grooves in the wall & fixing with cement mortar,complete as directed by the engineer in charge.

Providing & fixing CP brass Health fauceth(hand spray) in toilet including necessary piping/ fittings etc.complete of ARK make

Repairing of Health fauceth(hand spray) with replacing fittings & fixtures to arrest leakage

Supplying and fixing C.I. cover without frame for manholes :455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (cement make:-ACC/Ultratech)

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

P/f rigid PVC pipe 4kg/cm2 including fittings complete socketed(make:-Supreme/Prince/Astral/Finolex)

Providing and fixing rigid PVC bend (approved make) for S.W.R. pipes including lubricating.etc.complete bend with door:(make:-Supreme/Prince/Astral/Finolex)

100 mm dia

75 mm dia.

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating.etc.complete, with door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia.

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating.etc.complete,with door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia.

Providing and fixing single "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,without door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia.

Providing and fixing single "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,with door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia

Providing and fixing double "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,without door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia.

Providing and fixing single "Y"of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete,with door:(make:-Supreme/Prince/Astral/Finolex)

110 mm dia

75 mm dia.

Providing & fixing UPVC pipes to IS:15778 including all UPVC plain , including all UPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt.spacing.This includes jointing of pipes and fittings with one step UPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge.External work -Exposed on wall.(ISI marked)

15 mmdia.

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

Providing water proofing treatment over the prepared surface with two or more coats with Smart Care damp proof cource of Asian Paint as per the recommendation of manufactures including all taxes,labour & transport complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm (make:-Bell/Ramco//Kajaria/Nitco/Somany)-

Maintenance & operation of filtration units located behind the tennis court & behind the hostel in NIO colony, Dona Paula. Approximate discharges is 50 to 70 cum/day, including providing & supplying & adding the chemicals such as Alum,lime, chlorine etc.as per the concentration of BOD & COD of raw waste & treated waste as per the guide lines.

Cleaning & removing sludge & sewage water including adjacent chambers of septic tank behind the tennis court & behind hostel in NIO colony & behind CSIR-Science centre guest house.(Note:-Total 3 septic tanks to be cleaned half yearly)

Description of Work / Item(s)

Earth work in excavation by mechanical means (hydraulicexcavator)/manual means in foundation ,pipeline,trenches drain (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides,ramming of bottoms lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.

All kinds of soil

hard rock where blasting prohibited

Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) a)In foundation and plinth

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)

Laterite masonary in neatly dressed stones for 23 cms th.masonary walls in c.m.1:4(1 cement:4 coarse sand in foundation upto plinth level & laterite masonry in all sizes in superstructure from floor I level upto floor V level.

Providing TMT steel reinforcement bars of SAIL,TATA,VIZAG made only (Confirming to IS 1786 of 1986) for RCC work (confirming to I.S.1786 of 1986)including bending ,binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strengh is not less than of surrounding concrete in the structural member.

Centering & shuttering including strutting proping etc. and removal of form for.Foundation, footings, bases of columns etc. al Columns, pillars, posts and struts .Sides & soffits of beams, beam haunchings, cantilever, lintels , plinth beams not exceeding 1m in depth, Staircase ( except spiral staircase ) , Suspended floors, roofs, landings, shelves & their supports balconies and chajjas upto floor two level

Providing and laying in position (1:1 1/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement :1 1/2 coarse sand:3 graded stone agg 20mm nominal size)

All works upto plinth level

in beams,suspended floors,roofs having slope upto 15*landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases upto floor five level

Providing and laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded granitic a basaltic stone aggregate 40 mm nominal size)excluding cost of centering ,shutting and finishing in All works upto plinth level

Providing & laying cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded granitic or basaltic stone aggrt.20 mm nominal size)excluding cost of centering ,shuttering and finishing in:All works upto plinth level

Providing & appying white cement(Make:-JK white/Birla)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough withsponge

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)25 mm thick

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser ofsteps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile 600x600 mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than0.08% and of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS :15477, in average6 mm thickness, including grouting of joints (Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.) Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm

Providing 25 mm th. Cuddapah slab machine cut & polished on either side in partitions including making necessary grooves in the wall & fixing with cement mortar,complete as directed by the engineer in charge.

Providing and fixing Vinyl flooring of approved shade and design with adhesive complete.

Providing & laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 (1 cement:4 sand) laid over and joined with cement slurry including rubing complete granitic slab (jet black with mirror polish)20 mm thick

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) Dark shade pigment using ordinary cement

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : Size 450x300x150 mm

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms each 180.80

Providing and fixing brass stop cock (heavy) of approved quality 15 mm nominal bore

20mm nominal bore

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour.

a) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

b) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R.pipes including lubricating etc.complete, without door:110 mm dia.

Providing and fixing vitreous china wash basin with RS or C.I.brackets painted white, 15 mm C.P. brass piller taps C.P.brass chain with rubber plug 32 mm C.P.brass waste of pattern,32 mm dia.M.I.or C.P.brass trap and union complete ,incuding cutting and making good the walls where required.Flat back wash basin size 630×450 mm with a single 15 mm C.P.brass pillar taps.

Providing and fixing C.P.brass shower rose with 15 or 20 mm.Inlet:100 mm dia.

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms

Providing and fixing P.V.C.connection pipe with brass union 15 mm nominal bore:

30cm(12") length

45cm(18") length

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 40 mm dia

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. Overall size 10mmx460mm (24"x18") bowl size 560mmx410mmx215mm (22"x16"x81/2") Glossy. 1.0mm thk

Providing and fixing 10 litres pvc. Automatic flushing cistern with fittings.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing & fixing GI pipe complete with GI fittings and clamps including cutting & making good the wall etc. (internal work)

a) 15mm dia nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

d)32 mm nominal bore

e)40 mm nominal bore

f)50 mm nominal bore

Providing & fixing GI pipe complete with GI fittings including trenches & re-filling etc.(external work)

a) 15mm nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

d) 40mm nominal bore

e) 50mm nominal bore

f) 80mm nominal bore

Providing and fixing brass bib cock (heavy)of approved quality a) 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Providing & fixing brass full way valve (heavy) duty with wheel of approved quality:

a) 25mm nominal bore

b) 32mm nominal bore

c) 40mm nominal bore

d) 50mm nominal bore

e) 65mm nominal bore

f) 80mm nominal bore

Providing & fixing brass ball cock of approved quality high pressure with PVC floats

a) 15mm nominal bore

b) 20mm nominal bore

c) 25mm nominal bore

Providing & applying Portland Cement (OPC-43 Grade)

Cement Polymer Grout Compound

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)

80 mm nominal bore

65 mm nominal bore

Providing & fixing 600x450 mm bevelled edge mirror of superior glass (of approved. Quality) complete fixed to wooden cleats with C.P.brass screws and washers complete.

Providing & fixing normal gauge polythene pipes of approved quality complete with special flange compression type fitting (of approved make) including trenching and refilling etc.(external work)(high density):

25mm nominal bore

32mm nominal bore

40mm nominal bore

50mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing & fixing CPVC pipes to IS:15778 including all CPVC plain ,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt.spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge.Concealed work(medium duty SDR 13.5 pipes)including cutting chases and making good the walls etc.

15 mm nominal outer dia.pipes

20 mm nominal outer dia.pipes

25 mm nominal outer dia.pipes

32 mm nominal outer dia.pipes

Providing & fixing CPVC pipes to IS:15778 including all CPVC plain ,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes trenching, refilling and testing of joints complete as per direction of Engineer Incharge external work heavy duty SDR 11 pipe

15 mm nominal outer dia.pipes

20 mm nominal outer dia.pipes

25mm nominal outer dia pipes

32mm nominal outer dia pipes

40mm nominal outer dia pipes

50mm nominal outer dia pipes

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion

Single socketed pipe 75 mm dia

Single socketed pipe 110 mm dia

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Making connections of GI distribution branch with GI main 25-40mm nominal bore by providing and fixing Tee incluidng cutting and threading the pipe etc. Complete

Making connections of GI distribution branch with GI main 50-80mm nominal bore by providing and fixing Tee incluidng cutting and threading the pipe etc. complete

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing CP brass Fancy TWO WAY LONG BODY BIB Cock WITH WALL FLANGE Jaguar make or equivalent. a) 15mm nominal bore with all fittings complete

Providing & fixing Stainless Steel Cylindrical lock 60mm dia with pair of knob, keys etc. with necessary screws etc. for doors complete as approved by engineer. Entrance Function: Internal Push Button & External Key Operation

Providing and fixing hydraulic floor spring of reputed make Everrite, prabhat or equivalent as per the manufacturers specification having double action spring as approved by Engineer-in-charge

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing Butt hinges anodized transparent or dyed to required colour or shade with necessary screws etc. Complete.

Providing and fixing allum. Tower bolt (barrel type) anodised or dyed to required colour or shade with screws etc. Complete

P/f allu. Handle anodized or dyed to required colour or shade with screws etc. Complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete

125×70×4 mm (ordinary type)

100×70×4 mm (ordinary type)

75×40×2.5 mm (ordinary type)

50×40×2.5 mm (ordinary type)

Providing and fixing bright finished brass tower bolts (barrel type) with screws etc.complete.

Providing and fixing bright finished brass handles with necessary screws etc complete

Providing and fixing bright finished brass door latch with necessary screws etc complete

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) metre 159.35

Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 10.30.1 4.0 mm thick glass panes

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hinges, chiseling etc complete as directed by Engineer- in – charge of any size

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Labour charges for engaging on daily wage

a) Helper

b) Plumber/Fitter

c) Carpenter

d) Mason

e) Painter

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in charge.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood9.40.1.2 50 x 20 mm

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self drivenself tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer in-chargeDecorative finish (wood grained finish)

Providing & fixing 150mm bright finished brass floor door stopper with rubber cushion screws etc.to suit shuuter th.complete

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Painting (one or more coats) with synthetic enamel paint of aproved brand and manufacture in all shades on old work to give an even shade.

Polishing on wood work with ready made superior quality. Wax polish of approved brand and manufacture on old work

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Removing dry OBD by scraping, sand papering and preparing surface smooth including necessary repairs to scratches etc. Complete

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Applying primer coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting (two or more coats) with synthetic enemal paint of approved brand and manufacture in all shade on new work over and under coat of suitable shade with ordinary paint of approved brand & manufacture to give an even shade

Polishing on wood work with ready made superior qlty. Wax polish of approved brand and manufacture on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer

Wall painting (two or more coats ) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.Asian/ Nerolac/ Berger

Demolishing old RCC work including stacking of steel bars & disposal of unserviceable within 50mts. lead

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m. Lead

Dismantling tilework in floors and roofs laid in cement mortar including stacking material within 50m lead for thickness of tiles 10mm to 25mm

Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50m .lead

Dismantling steel or wood shutters including chowkhats architrave holdfast etc. complete and stacking within 50m. Lead

of area 3 Sq.m and below

area beyond 3 Sq.m

False ceiling gypliner ceiling which includes providing & fixing GI HG angle of size 0.55mm thick having two equal flanges of 25mm each screw fixed to brick wall/partition with the help of nylon sleeves & screws at 610mm c/c.Then suspending chan 12.5mm tapered edge gypboard confirming to IS 2095 1982 is then fixed to channel section with 25mm drywall screws at 230mm centre.including filing finishing with jointing compound,joint paper tape & two coats of drywall top coat suitable for gypboard

Providing & Fixing of Aluminium Lay-in Perforated Tile Ceiling on 24 /14 mm ‘T’Framework of module 600mm x 600mm. Tiles of size 575mm X 575mm / 584mm x584mm made out of 0.6mm thick Aluminium. Perforation of the tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling. The tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. The Tile shall be Polyester based, powder coated in white colour. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main tee runners shall be suspended at an interval of 1200mm centre to centre. The 24 /14 mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 24 /14 mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm G.I. rod from slab/roof. The suspension shall be provided at 1200 to 1500mm centre to centre. Tee framework would be made of GI and Powder coated. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with sliding shutters using 18 mm series shutters section.4mm thk plain float glass specification 1 outer frame shall be of aluminium rectangular tube of 63mmx 37mm x1.2mm @ 0.635kg/m 2. 2 track bulb with gutter [email protected]/m 3.two track plain on top and side [email protected]/m 4. Shutter top & bottom .2mm@ 0.428kg/m 5. Lock interlock section 40x18x1.2mm @0.512kg/m 6. Handle section 40x18x1.2mm @ 0.428kg/m Jindal/Hindalco Plain glass

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: fixed windows using 18 mm series shutters section.Plain plate glass

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: single or double leaf door shutters using 18 mm series shutters section. 1 outer frame shall be of aluminium rectangular tube of 63mmx37mmx1.2mm @0.635kg/m 2. door bottom 100x44.5x1.85mm @1.505kg/m 3.door top 50 x 44.5x1.5mm @0.794kg/m 4. door vertical 0x44.5x1.8mm @0.947kg/m 5. door middle 50x45x2.5mm @ 1.292kg/m 6. glazing clip 19x17x0.9mm @ 0.113kg Jindal/Hindalco particle board

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: single or double leaf door shutters using 18 mm series shutters section.1 outer frame shall be of aluminium rectangular tube of 63mmx37mmx 1.2mm @0.635kg/m 2. door bottom 100x44.5x1.85mm @1.505kg/m 3.door top 50x44.5x1.5mm @0.794kg/m 4. door vertical 50x44.5x1.8mm @0.947kg/m 5. door middle 50x45x2.5mm @1.292kg/m 6. glazing clip 19x17x0.9mm @ 0.113kg Jindal/Hindalco Plain plate glass

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: fixed partitiions using 18 mm series shutters section. 1 outer frame shall be of aluminium rectangular tube of 61.9mmx 36.5mmx 1.2mm @ 0.7kg/m 2. Glazing clips [email protected] 3.middle tube section with double glazing 61.9x 36.5x1.2mm @0.8kg Jindal/Hindalco Plain float glass

Providing and fixing powder coated aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: fixed partitiions using 18 mm series shutters section. 1 outer frame shall be of aluminium rectangular tube of 1.9mmx36.5mmx 1.2mm @0.7kg/m 2. Glazing clips 19 x17x [email protected] 3.middle tube section with double glazing 61.9 x36.5x [email protected] Jindal/Hindalco & Vilson/ISI mark .Particle board

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing & fixing powder coating with pure polyester powder of shade of required colour on the aluminium section aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc.complete as per direction of the Engineer-in charge:window with two sliding shutters using 18mm series shutter section/openable windows/door shutters/partitions.

a)Acrylic sheet/Particle board

b)Plain glass 5mm

Description of Work / Item(s)

SUMMARY SHEET FOR AMC CIVIL WORKS

TOTAL OF BoQ1 FOR AMC PORTION OF PART - A (NIO - INSTITUTE)

TOTAL OF BoQ2 FOR AMC PORTION OF PART - B (NIO - COLONY)

ravi kumar

VirenderKumarAndCo

ravi kumar