CARRYING OUT REPAIRS ROUTINE MAINTENANCE AND INCLUDING MANNING AND OPERATION OF LIFTS INSTALLED IN BLDGS NARMADA HOOGLY TAPTI KAVERI HIMADRI VIDYA VIJAYA AND CERTAIN BLOCKS AT NOFRA UNDER GE NOFRA COLABA MUMBA

Amount

Manning & operation of electrically operated lift 08 Ps/ 13 Ps (544/ 884Kg) and 1000/ 2000Kgs Goods lift of make - ECE, OTIS,Thyssenkrupp,etc to serve upto G+12 upper floors (Vidya, Vijaya), 6Ps/8 Ps (408/544Kg) capacity of BBL/OTIS make to serve upto G+6 upper floors in bldg Narmada, Hoogli, Tapti, Kaveri and Himadri adaily 16hrs in two shift from 0600 hrs to 1400 hrs and 1400 hrs to 2200 hrs including taking care of from any pilfrerage/ theft or damage etc, complete all as directed by Engineer-in-Charge in Bldgs :Vidya,Vijaya,Narmada, Hoogli, Tapti, Kaveri and Himadri - bldgs (Total- 07 Nos bldgs) Note :- (i) One lift operator to be employed in each bldg per shift. (ii) Passes will be processed alongwith (after verification of antecedence of deployed employees and verified experience certificate only. Pass shall not be granted without submission of proof of well qualified lift operators & experience certificate. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of pass)

(iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Rescue Operators shall be trained for rescue passangers of lift by an enlisted OEM / Lift maintenance contractor / Lift maintenance having approval lift licence issued by lift inspector of PWD and certificate for the same be submitted with proposal for passes. (vi) Lift operator shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected. (vii) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (viii) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell. (ix) In case of any necessity for rescue operation or accident, Rescue Operator shall be capable of rescue the passenger and reacting to the situation (accident etc) (x) Contractor shall submit the labour licenece VAT as applicable according to latest labour laws /act & Copy of GST Regn registered number issued by concerned authority. (xi) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (xii) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest labour laws and act alongwith RAR failing which RAR will not be progressed for payment. (xiii) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable.

Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. Location :- Vijaya 02 NOs lift 08 PS (544 Kg) ECE Make G+12 upper floor.

All as per item No 2 herein before but 13 passenger G + 12 upper floors in building Vidya 02 Nos lifts of ECE Make.

All as per item No 2 herein before but Goods (1000 Kgs) G + 12 upper floors in building (Vijaya) 01No lift Make- ECE

All as per item No 2 herein before but Goods (2000 Kgs) G + 12 upper floors in building (Vidya) 01No lift Make- ECE

All as per item No 2 here in before but 13 PS (884Kgs) in bldgs-Narmada, Tapti, Hoogli, Kaveri. Make : OTIS (04 Nos)

All as per item No 2 here in before but Goods lift (2000Kgs) in bldg Narmada, Tapti, Hoogli, Kaveri. Make -OTIS ( 04 lifts) (i) Cost of spare parts / material required for above mentioned maintenance is deemed to be included in the quoted rate. No additional cost of spares is admissible for the above maintenance. (ii) One Rescue operator / lift mechanic shall be available round the clock at lift complaint cell to the safe & smooth functioning of the lift to carry - out rescue operation. (iii) The rates quoted by the contractor shall deemeed to be included repair/maintenance of hall push buttons, COP buttons, cabin lights, fan etc

All as per item No 2 here in before but Himadri building 'OTIS' make 02 Nos lift 08 PS (544 Kg) G+6 upper floors

All as per item No 2 herein before that 6 passenger (408 Kgs) G+5 in building : A (E), A (W), B (W), C (W), D (E), E(E), F(W) (07 Nos lifts 06 passenger (408 Kgs) G+5 upper floor Thyssenkrupp Make

All as per item No 2 herein before that 6 passenger (408 Kgs) G+5 in building : J (W), K (W),H (E), G (E), G(W) (Total 05 Nos lifts ECE Make)

Dismantling and taking out unsserviceable control panel and control wiring and supply and fix new control panel in hinged MS powder coated cabimet, with control wiring comprising with multiple microcontrolled programmed chip based, controlled by pulse modulation, complete with all safties such as thermal overload protection, over current protecrtion, auto phase link to each other in network, and compatible to existing capacity VVVF drive including proper connection with proper lugs, terminal connectors screws and motor connection with galvanised sheet trucking 24 SWG including wiring of main motor with suitable size of stranded copper cable etc complete al as specified and directed by Engr-in -charge. Make- Yaskawa (japan), Snieder Location- B west

Diconnecting and taking out unserviceable defective main VVVF drive from existing control pannel and supply and fix new main VVVF drive unit of Make : Yashikawa (Japan) suitable for 15 KW capacity in existing pannel and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift all as specified and directed by Engineer-in-Charge in certain building at Nofra.Make- Yaskawa/Fuji

Disconnecting and taking out old defective V3F door operator with all connected accessories from existing car door, supply and fix new V3F door drive operator suitable to existing motor mechanism unit suitable for existing door opening and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift car door all as specified and directed by Engineer-in-Charge at Nofra

Disconnecting and taking out old defective infra red door sensor of any make and supply and fix new infra red door sensor up to full length of car door complete all as specified and directed by Engineer- in- charge, in certain lift at Nofra. Make- Lamda, Weco, TL Jones as approved

Taking out old unserviceable cabin fan from car cabin, supply and fix new cabin fan non osciliating type axial flow, single speed 300mm sweep, 24 Volts, ISI mark with stainless steel grill. Complete all as specified and directed by Engineer- in - Charge Make- VBM/EMCO/SINI

Desconnecting and taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated 16 core flat / round type with multistranded copper conductor 1100 Volts grade of size 0.75 Sqmm confirming to IS and including thimbless suspended type freely move with car cabin up and down movements between ground and upper floors including necessary proper connection with midway junction and other connection required in circut complete all as specified and directed by Engineer-in-Charge

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge in certain building/blocks at Nofra. Make : USHA MARTIN

Disconnecting and taking out governer steel wire rope after disconnecting from car cabin & supply and fix new steel wire rope 08 mm dia ungalvanised 08/19 construction in and including necessary connection with machine room and shaft pit complete with clamp nuts bolts and washers complete all as specified and directed by Engineer-in-Charge at Nofra .

Dismantling and taking out ARD control system and commissioning and testing of new ARD system including PC cards/diodes suitable for upto 15 HP motor including wiring with connected item in existing building all as specified and directed by the Engineer-in-Charge.Make- Adcon

Supply and fix the counter weight guard at the bottom of counter weight raail covering full length to secure counter weight complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old/ unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanised sheet metal trucking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge

S & F in repairs breaking resistor choke for upto 15 HP VFD and necessary wiring including MS box enclosures for 06/08/13 PS lifts complete all as specified and as directed.

Disconnecting and taking out unserviceable COP assembly, Panel assembly complete with illuminated push button for floor position, alarm, nonstop door open, door close, cabin fan, cabin light stop etc with direction indicator with LED display with CPI card of stainless steel face plate in and including necessary wiring for illuminating push button complete all as specified and directed by Engineer-in-Charge for G+05 Storey buildings at NOFRA.

Dismantling of old defective hall push button assembly with new hall push button and direction indicator LED display with LP/ LPC card of stainless steel face plate to match with the existing control/electric system including cutting of wall and making good to disturbed surface with masonry work to match with existing surface for passenger lifts.

Monarch Enterprises

Escon Elevators Pvt Ltd

Veer High Tech Solution