18W LED FITTING

I/We engage t o supply t h e Western Railway w i t h t h e articles specified above upon t h e terms o f t h e Indian Railway Standard C o n d i t i o n s of Contract (latest revision) and upon t h e t e r m s o f the Revised Special Conditions and Instructions for the Guidance of the Contracts issued by the Western Railway.

Firm should quote as per the tendered specification. Tenderers to give item wise compliance of each parameter asked in the specification and in case of deviations, the remarks for deviations. The technical deviations from the tendered s p e c i fi c a t i o n s h o u l d b e clearly stated. The o ff e r w i t h technical deviations are liable to be ignored / rejected. Whether technical deviations are improvement over tendered specification o r otherwise should be indicated.

1. Bulk procurement of this item will be made from proven source having performance for supply of tendered item or similar item to any of Railways or PUs for quantity not less than 20 percent of tendered quantity in last 3 FYs other than current FY of tender closing date. (similar item means supply of LED lights complying with the same IS of the tendered item with different length of light and with different wattage is allowed. 2.Firm should submit documentary evidence as proof of execution of PO, such as copies of R.Notes/CRAC/CRN/completion report. Failure to submit necessary documentary evidence along with offer will imply that firm has no such performance and the offer will not be considered for bulk order. 3.Firms not having adequate proven performance but complying other suitability criteria can be considered for developmental order for maximum 20 percent of tendered quantity. 4. Firms supplied tendered item to Western Railway in last 3 FYs other than current FY of tender closing date will be considered for order based on the records available with the Railway.

OEM:- Procurement from Authorized Agents/Dealers/Distributors etc. shall be as per para 0400 of Western Railway Bid Document (Indigenous Purchases), Version- 14 of June 2024. a) OEMs should quote directly preferably or an OEM can authorize and give Tender Specific Authorization (TSA) to its Agent / Dealer to quote on their behalf similar to proforma attached as Annexure-2. b) The authorized Dealer/Agent should upload valid tender specific authorization, along with the offer, failing which their offer is liable to be passed over. c) Trader/Authorized Dealer should mention name of Manufacturer, Make and complete address in their bid for inspection of material at OEM works. d) In a tender, either the authorized agent/dealer on behalf of the Principal/OEM or the Principal/OEM itself can bid, but both cannot bid simultaneously for the same item in the same tender. Further, against a particular tender, one Principal/OEM should not issue Tender Specific Authorization to more than one agent/dealer. Such offers with different terms against a particular product, if treated as ambiguous offers, the bidder(s) or their Principal/OEM will have no right to lodge any claim. e) If an authorized agent/dealer submits bid on behalf of a Principal/OEM, the same agent/dealer shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product and such bids will be summarily rejected.

MAKE IN INDIA :Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

By Consignee after receipt.

MSE: a] Please indicate whether you a r e registered w i t h a n y o f the following Micro & Small Enterprises (MSE) agencies : District industries Centres, KVIC, KVIB, Coir Board, NSIC, Directorate of Handicraft & amp;Hand loom o r a n y other body specified by Ministry o f MSME.[Name the agency clearly] b] If you are registered with any of the above mentioned agencies, lease indicate the terminal validity date of registration and also indicate whether the Enterprise is owned by SC/ST.

The tenderer / their OEM's must have supplied same / similar equipments to Govt. / Semi Govt. or reputed Private organizations and also indicate the No. of equipments supplied in last 3 / 4 years. The tenderer shall submit /upload Purchase Order copies and proof of having supplied the item along with Commissioning / Installation report from the Consignee.

Firm Price: Tenderers should quote firm price. No price variation will be acceptable.

In case the successful tenderer is not l i a b l e t o b e r e g i s t e r e d under CGST/IGST/ UTGST /SGST ACT. The Railway shall deduct the applicable G S T f r o m h i s / t h e i r b i l l s under r e v e r s e c h a r g e mechanism (RCM) and deposit the same to the concerned tax authority

All the bidders / tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST law.

Tenderers should furnish his GSTIN with copy of registration with his offer.

Successful Tenderer should submit an undertaking that he will pay GST collected from Railway within due date and upload the payment details in GSTIN to enable Railway (purchaser) to obtain input tax credit.

P u r c h a s e r m a y i n c o r p o r a t e HSN n u m b e r i n t h e tender document.However, it shall be the responsibility of the bidders to quote correct HSNnumber and corresponding GST rate.

W h e r e h o w e v e r , b i d d e r s quote different G S T rates i n offers, during transition phase, following conditions may be incorporated as part of tender conditions :

The offers shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number

Purchaser s h a l l n o t b e responsible f o r a n y misclassification o f HSN number or incorrect GST rate if quoted by the bidder.

Wherever the successful bidder invoices the goods at GST rate or HSN number which i s different from t h a t incorporated i n t h e purchase order;payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed.

Vendor is informed that she / he would be required to adjust her / his basic price to the extent required by higher tax billed as per invoices to match the all inclusive price as mentioned in the purchase order.

Any amendment to GST rate or HSN number in the contract shall be as p e r t h e contractual conditions and statutory amendments i n the quoted GST rate and HSN number, under SVC.

LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: Recovery of Liquidated Damage (LD) shall be levied @ 1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.

F O R : I n c a s e o f r o a d delivery, the d a t e o f d e l i v e r y at destination[Consignee's end] shall o n l y b e treated a s delivery date irre s p e c tiv e of F.O.R. / F.O.T. condition mentioned elsewhere in the contract / tender.

Te n d e r e r m u s t q u o t e FOR destination rates, movement by road only.Clearly indicating t h e transport charges / f r e i g h t element separately.Tenderer not accepting the term are likely to be passed over without any further references to the firm.