GENERAL Budget 2022 23 Town Improvement works Development of Various Towns and Junctions of Vellachal Kottam Panayathamparamba Edakkad with its Beautification under PWD Roads Section Kannur by Providing Drainage and Footpath including fixing of ha

Amount

Town Beautification Works_MoRTH

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

OD191581/2022-2023:MIx seal Surfacing Providing, laying and rolling of close graded premixed surfacing material of 20mm thickness composed of 11.2mm to .9mm(Type A) or 13.2mm to.9mm(Type B)aggregates using Bitumen VG-30to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a static roller 8-10 KN and finishing to required level and grades as per Technical specification. By Manual means Type A(Bitumen VG-30)

OD191771/2022-2023:Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with PVC pipe 110 mm outer dia. 4kgf/cm2, extending through the full width of the structure with slope of 1V : 20H towards drawing force. Complete as per drawing and Technical Specifications

55.23:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

OD192051/2022-2023:Supply and fixing of solar powered traffic blinker controller with real time CLF controller strategy, control cables, supply of 300mm polycarbonate housing with door assembly and hood, supply of signal poles, MS clamps for mounting of signal heads all complete as the direction of Engineer in charge

8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Town Beautification Works_DAR

10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

11.20.1:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

16.89:Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

OD191588/2022-2023:Providing and supplying of Roystonea regia (Royal Palm), low to medium grown species, stacked with care considering its delicate nature including loading and unloading of the heavy palm transited from the planter source, planted on ground to bring about the aesthetics carefully placed on the location specified, including digging, supply and filling of good earth, manured, watering for a specified period of 45 days from the day of planting till the root gather its firmness to the newly shifted location acclimatized with the new environment and surrounding, maintenance until the period of watering all complete as per direction of Officer-in-charge.

OD191591/2022-2023:Grubbing and disposing of effectively held firm roots of large trees cut to its stumps, dismantled by using heavy earth moving equipment carefully dug and scraped through without damaging the pavement surface in proximity to the trunk of the tree including engaging labours to drag or pull hard or sharp implement across the surface so as to remove and cut the roots/ other matter; stacking of the serviceable material and disposal of the unserviceable material all complete as per direction of Officer-in-charge.

OD191592/2022-2023:Design, composition, supply and installation of three dimensional laser cut LED Illuminated Logo/Name/signage etc for facade/wall fabricated as per requirements acrylic water proof lettering illuminated internally with LED power module concealed tight including providing of a spacer held on anchor bolts, washers suitable for outdoor environment with power taken from external source including labours for fixing, transportation of materials and installation all complete as per the instructions of Engineer-in-charge.

OD191593/2022-2023:Providing and fixing of 160mm semi circular plain PVC gutter including Runner Drop with necessary bolts, nuts and washers etc., making necessary connections with rain water pipes all complete as per the directions of engineer-in-charge.

OD191594/2022-2023:Providing skilled artistic impression by way of mural textured graphic theme design painted directly on the facade wall provided at various locations as part of beautification works including supply of all material specific for artwork with different layer of painting coat applied with texture coat, base coat and upper matt layer finishes as specific to the artwork, scaffolding etc. all complete as per the direction of the Engineer-in-charge.

OD191596/2022-2023:Providing & fixing of Ceramic roof tiles of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

OD191597/2022-2023:Providing & laying of Ceramic Roof Ridge Tile of approved pattern on steel frame work complete (steel frame work to be paid separately).

OD191598/2022-2023:Laterite masonry with neatly dressed laterite stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement incuding all cost of materials, labour charges etc.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

16.92:Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10 mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge

PINARAYI INDUSTRIAL CO OPERATIVE SOCIETY LTD

ABDULKADER HAJI. D

Bidder Name

M T MOHAMMED KUNHI

ABDULKADER HAJI. D

PINARAYI INDUSTRIAL CO OPERATIVE SOCIETY LTD