Upgradation of AHUs for HVAC system at HAL, Korwa.

Hindustan Aeronautics Limited Avionics Division, Korwa Post Office : HAL The : Amethi Dist : Amethi (UP) - 227412

Tender Notice No. : HAL/KWD/PM/25/SPR/63

Name of work: “Upgradation of AHUs for HVAC System at HAL, Korwa.”

PRICE BID FOR SUBMITTING E-TENDER

NAME OF AGENCY (To be filled in highlighted box ) :

GST No. (To be filled in highlighted box ) :

HSN/SAC Code (To be filled in highlighted box ) :

BILL OF QUANTITIES WITH SPECIFICATIONS

The tenderers are requested to read the following before quoting:

1 The payment terms shall be governed as per the terms indicated in General conditions of contract.

2 Tenderers are required to go thorugh the complete scope of work as per Annexure-I& II of the Tender document before quoting the prices

3 Tenderers are required to make the DATA ENTRY of the item rate in figures and rate in words for total amount. The rate to be inserted should invariably correspond to the "UNIT" given under unit column.

4 Tenderer has to fill the GST No. and HSN code in the columns mentioned below.

5 Rate should be quoted excluding GST and inclusive of all other taxes etc.

6 Contractor is advised to go through the tender documents (NIT and Technical Bid), before quoting the rates.

7 Basic Rate to be quoted for each item.Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

8 Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

9 Amount towards GST will be paid along with RAR payment against invoice.

10 The tenderers are requested to abide by the rules of prevailing GST act.

11 This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

12 Contractor shall quate the numerical value in the highlited cell only.

Sl. No Specification of item Quantity Unit Rate in Figs excluding GST Rate excluding GST in words Amount Excluding GST in Figs (E=C*A)

1 24000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel - Supply, installing, testing and commissioning of 24000 CFM double skin construction draw through type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction & 2 Row Hot water coil (where reheat is specified), squirrel cage induction motor , airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 125 mmwg The motor selected shall be energy efficient having high efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply compatible to Variable frequency drive (VFD). Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3. All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 2 Nos 0.00

2 20000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel - Supply, installing, testing and commissioning of 20000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction & 2 row Hot water coil (where reheat is specified), squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 125 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

3 16000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel - Supply, installing, testing and commissioning of 16000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction & 2 row Hot water coil (where reheat is specified), squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 125 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

4 15000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel with return Open- Supply, installing, testing and commissioning of 15000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction & 2 Row Hot water coil (where reheat is specified), squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 120 mmwg . The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

5 9000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel with return open- Supply, installing, testing and commissioning of 9000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction, squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 110 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

6 9000 CFM AHU with 6 row cooling coil with pre filters and with suitable Electrical VFD Control Panel with return open- Supply, installing, testing and commissioning of 9000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction, squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 110 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 3 Nos 0.00

7 8000 CFM AHU with 6 row cooling coil with pre filters and with suitable Electrical VFD Control Panel with return open- Supply, installing, testing and commissioning of 8000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction, squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 110 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with Variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

8 6000 CFM AHU with 6 row cooling coil + 2 row heating coil with pre filters and with suitable Electrical VFD Control Panel with return open- Supply, installing, testing and commissioning of 6000 CFM double skin construction draw thru type AIR HANDLING UNITS with pre & fine filters having thickness minimum 50 mm and its related accessories with Thermal Break Profile as per specification, each complete with, min 6 Row Deep water coil of copper tube & aluminum fins construction & 2 Row Hot water coil (where reheat is specified), squirrel cage induction motor with VFD, airfoil backward curved centrifugal fan, belt drive and vibration isolators, coil size shall be selected for a maximum face velocity of 500 feet/minute and static pressure shall be 110 mmwg. The motor selected shall be energy efficient having efficiency (Class IE4) at full load ranging between 90% to 95% in accordance with motor rating as per specification. Motor shall be suitable for 415±10% volts, 50 Hz, 3 phase AC supply with variable frequency drive. Fan motor assembly (as whole) shall be statically and dynamically balanced to grade G 6.3 as per ISO-1940/AMCA 204-3.All units shall be complete, return and fresh air connections. Duct flexible connector (fire proof) shall be provided at outlets and return connection of AHU and as per Annexure- I & II. Make:- Edgetech/Zeco/Waves. Supply & installation of electrical VFD control panel suitable for operation of above AHU with all standard electrical equipments and as per industrial standards along with complete cabling saddling, wiring, glands, cable termination (both sides) etc from panel to AHU. Required cables are to be supplied by the contractor to make the AHUs operational. 1 No 0.00

9 Supply & installation of the items and execution of work as per Annexure- I & II. 1 Job 0.00

Sub Total Estimated Amount Base Rate (Rs.) 0.00

Add GST @18% 0.00

Grand Total amount including GST (Rs.) ₹ 0.00

Total Amount in words