Work of short term maint works and activities on section 1 Dabhan Nadiad City Bhumel Section 2 Anand City Portion 3 Napa to Borsad Section 4 KGN Circle to Ras to Kankapura Section 6 Nadiad railway loop section Total Length 44.95 Km of NH64 inthe SoG

ROAD PROPERTY MAINTENANCE

Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per Maintenance Standard Clause 3.3 (Frequency will be once in a quarter). a) Shoulders including side slopes ofembankment up to toe line on both sides of the carriageway. (Frequency of cleaning will be four times in a year; however limited to only areas prone to growth of rank/undesirable vegetation and weeds).

Applying Epoxy mortar over leached honey combed and spalled concrete surface and exposed stee reinforcement complete as per Technical Specifications Clause 2804 and as per approval of the Engineer.

Providing, Laying and compacting Granular Sub Base (GSB) with approved materials complete as per Technical Specifications Clause 401 conforming to Table 400-1 as per approval of Engineer-in-Charge. (for grading-iii material)

Providing, laying and compacting Wet Mix Macadam (WMM) base course with approved materials complete as per Technical Specifications Clause no. 406 of MoRTH & as per approval of Engineer-in-Charge.

Providing, laying and compacting Dense Graded Bituminous Macadam complete as per technical Specification Clause no. 505 including tack coat as per Technical Specifications Clause no.503 using VG 40 grade bitumen) [For Grade-II, [email protected]% rate]

Providing, laying and compacting Bituminous Concrete as per technical Specification Clause no. 507 including tack coat as per Technical Specifications Clause no. 503 using VG 40 grade bitumen) [For Grade-II, [email protected]% rate]

B.T. Surface Painting: Providing and applying surface painting on B.T. surface using bitumen emulsion at the rate ofkg/ 10 sq.m. and flushing dust / sand at the rate of 0.06 cu.m. / 10 sq.m. as per MORT&H specification.

Providing and laying reinforced cement concrete pipe NP4/prestressed concrete pipe of 1000/1200 mm dia for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets all complete: (Singal row)

Restoration of Rain Cuts (Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loosesoil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes)

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Mechanical Means (i) Depth upto 3 m

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.(A) PCC Grade M15

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.(E) RCC Grade M25

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.(E) RCC Grade M25

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.(E) RCC Grade M25

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.(E) RCC Grade M25

Providing and fixing reinforced cement concrete M-15 grade 5th kilometer stones, kilometer stones andhectometer stones of Standard Design as per IRC:8- 1980 and MoRTH Specification Clause 804 including two coat painting with synthetic enamel paint after applying approved quality cement primer and printing letters with approved quality synthetic enamel paint on both sides as per MoRTH Specification Clause 804and as per drawing and direction of the Engineer-in- Charge. The job includes fixing of these distancemeasuring stones at places after dismantling of existing damaged stones, and further disposing of dismantledmaterial outside ROW. Rates quoted to be inclusive of the salvage value of the useful material obtained during the course of dismantling. The fixing of these stones shall be done with M-10 cement concrete as per drawing and approval of the Engineer-in-Charge. 5th Kilometer Stone

White wash/cement paint/snowcem in two or more coats to give an even shade and smooth surface for protection of exposed concrete/masonary portion of Bridges/CD works, kerb and wheel guard including scrapping of damage paint from old surface and repairing of the existing surface wherever necessary completedirected by the Engineer-in-Charge.

Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

Painting and lettering with enamel paint 3-coats etc.complete (i)Ordinary K.M.Stone for NH

Cleaning the road side drain incl. uprooting the vegetation & weeds from the gutter and excavating the deposited earth from the drain, incl. dressing of bottom and sides of drain stacking the excavated soil clear from the edge etc. comp. with all labour.

Cleaning the edge of kerbing from both the side of central verge, footpath etc including excavation and depositing the excavated cady dust, dirt etc. in the side shoulder etc. complete.

Providing and fixing reinforced cement concrete M-15 grade 5th kilometer stones, kilometer stones andhectometer stones of Standard Design as per IRC:8- 1980 and MoRTH Specification Clause 804 including two coat painting with synthetic enamel paint after applying approved quality cement primer and printing letters with approved quality synthetic enamel paint on both sides as per MoRTH Specification Clause 804and as per drawing and direction of the Engineer-in- Charge. The job includes fixing of these distancemeasuring stones at places after dismantling of existing damaged stones, and further disposing of dismantledmaterial outside ROW. Rates quoted to be inclusive of the salvage value of the useful material obtained during the course of dismantling. The fixing of these stones shall be done with M-10 cement concrete as per drawing and approval of the Engineer-in-Charge. Kilometer Stone

Providing and fixing reinforced cement concrete M-15 grade 5th kilometer stones, kilometer stones andhectometer stones of Standard Design as per IRC:8- 1980 and MoRTH Specification Clause 804 including two coat painting with synthetic enamel paint after applying approved quality cement primer and printing letters with approved quality synthetic enamel paint on both sides as per MoRTH Specification Clause 804and as per drawing and direction of the Engineer-in- Charge. The job includes fixing of these distancemeasuring stones at places after dismantling of existing damaged stones, and further disposing of dismantledmaterial outside ROW. Rates quoted to be inclusive of the salvage value of the useful material obtained during the course of dismantling. The fixing of these stones shall be done with M-10 cement concrete as per drawing and approval of the Engineer-in-Charge. Hectometer Stone

Supplying and installation of Road Delineators (Supplying and installation of delineators (road way indicator hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm widestripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.)The rate quoted is for the complete job aper Drawing and direction of Engineer.

Providing and marking of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms/sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashesmarking at the junctions as per Technical Specifications Clause 803.4 complete in all respect and as per approval of the Engineer-in-Charge.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (1) 90 cm equilateral triangle

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (2) 60 cm equilateral triangle

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (3) 60 cm Circular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (4) 60 cm x 50 cm rectanglular

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (5) 60 cm x 60 cm Square

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made o encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thicksupported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means oproperly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below grounclevel as per approved drawing) (6) 70 cm high octagon

Type-A, "W" :Metal Beam Crash Barrier (Providing and erecting a "W"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beamrail, 70cm above road/ground level, fixedon ISMCseries channel vertical post,150x75x5mm spaced 2m centre to centre,1.8m high, 1.1m below ground/road level, all steel parts and fitments to begalvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364,metal beam rail to be fixed on the vertical post with a spacerof channel section150x75x5mm,330 mm long complete as per clause 811)

Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x100mm, die cast in aluminium, resistant tocorrosive effect of saltand grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm up to a depth of 60mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

Applying 2 coats of lime and geru on trees (1.2m height of which 0.90m of geru and 0.3m patta of limeincluding cost of material, labours and all T&P as directed by engineer in charge Avg Dia < 50 cm

Applying 2 coats of lime and geru on trees (1.2m height of which 0.90m of geru and 0.3m patta of limeincluding cost of material, labours and all T&P as directed by engineer in charge Avg Dia >50 cm

Repair of steel Railing (Repair of steel railing to bring it to the original shape) inlcuding cutting,welding & two coats of oil painting

Hire charges for tractor with trolly / blade on front and cultivator on back including Diesel, oil, operator, helpeetc. comp. for earth work, carriage, removal of debris etc.

Hire charges for JCB/ Hydraulic Excavator / Hitachi or equivalent machine / Crawler Mounted Excavator (Bucket Capacity > 1.0 cum) for removal of Earth, debris, trees, plants, advertisement hoarding and other civilwork etc. comp. including charges of operators, POL etc. upto 0.9 cum bucket

Supplying labour per day at site of work for different type of work as directed (with tools and plants)

Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade)

Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)

Providing and marking of hot applied thermoplastic compound 5.0mm thick includ

ing reflectorising glass beads @ 250 gms/sqm area, thickness of 5.0 mm is exclusive of surface applied glass beads as per IRC:35. The finished Surface to be level, uniform and free from streaks and holes complete in all respects. The job includes marking of centre line, shoulder line, edge line, zebra crossing marking, arrows and dashes marking at the junctions as per Technical Specifications Clause 803.4 complete in all respect and as per approval of the Engineer-in-Charge.

Direction and Place Identification signs with size morethan 0.9 sqm size board. (Providing and erecting direction and place identification retro reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2Nos. firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)