Adarsh Tehri Nagar Zone 1 2 3 and 4 Block Bahadrabad water supply scheme including supply of all material labour T and P etc complete

Amount

Rising Main (Zone-1, 2, 3 & 4) Supply carting, laying, Jointing of full length of following dia of GI Class C pipes, including testing of pipe line complete.

65 mm G.I (M)

50 mm G.I (M)

D.I Sluice/ Gate Valve: Pressure PN 1.0

65 mm dia

50 mm dia

Supply of HDPE pipe including laying jointing Field testing,commissioning complete at site of HDPE (pe 80 grade compound)pipe as per IS 4984 and specifications for water application including all cost of material, labour required, transpotation, loading,unloading& stacking etc. For Zone-1, 2, 3 & 4

PE-100, Normal Pressure(PN)-6 in 6 kg/cm2

D.I. Sluice/ Gate Valve Pressure PN 1.0

Air valve

Fire Hydrant

Excavation of pipe line in soil mixed with course sand, shingle, kankar, including refilling of trenches after laying of pipe line including watering ramming etc. (Zone-1, 2, 3 & 4)

House Hold connection from main pipe line to House Boundary supply including all material etc complete. as per type design / Drawing provided by department and as per direction of engineer incharge.

Dismantling of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. (Zone-1, 2, 3 & 4)

Cement concrete road

Reinstatement of following type of road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.(Zone-1, 2, 3 & 4)

Cement concrete road M 20

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve,with C.I. surface box 100x100x75 mm with hinge cover fixedin RCC slab 1:2:4 cement sand and 20mm grit necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortar 1:3:12 mm chambers as per type design including supply of all materials labour t&p etc complete. (For Zone-4)

(i) Sluice valve/ wheel valve chamber(90X90X100)

Air valve Chamber

Supply of all materials, T&P etc.and construct an RCC over head tank of following size with RCC staircase & 1 m wide balcony, G.I. pipes railing consisting of 3 rows of 20 mm dia. G.I. pipe and angle iron posts around balcony & at the dome periphery, M.S. ladder from balcony to top of tank and inside the tank, supply and fixing M.H. cover with locking device, 1.2m dia ventilator, lightening conductor, water level indicator, supply and fixing of pipes, CI D/F pines, supply and fixing M.S. clamps with RCC column 40mm PCC 1:2:4 over 80 mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, escape channel of 20 m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of apex paint and testing of tank for water tightness and also including cost of supply and fixing of all necessary pipes and valves etc. all complete with inlet, outlet, overflow and washout pipes with bypass arrangement and necessary fittings and specials and testing of bearing capacity.

18 m staging (200 KL) Zone-1

Repair of Existing R.C.C. OHT of different capacity Situated at Zone-2, 3 & 4 water works campus including replacement (if required) of all assoceries like Vertical pipes, its gasket, Railing, Valves, its chamber, Painting Entire tank with Apex, Changing ventilater Jalli, Cleaning and washing inside the tank and as per direction of engineer incharge. Bidders are advised to inspect respected OHT prior quoting their rate.

Construction of Pump House cum staff Quarters including Supply of all materials, Labours, T&P etc. as per type design / Drawing provided by department and as per direction of engineer incharge. (Zone-1 )

Construction of Pump House and its all Apprutment work including all material Labour T&P etc complete as per drawing provided by deptt. and as per Direction of Engineer Incharge. (Zone-2, 3 & 4)

Construction of boundary wall around water works compound for each zone as per type design / Drawing provided by department and as per direction of engineer incharge. (Zone- 2, 3 & 4)

Fixing of 3.6m wide M.S. gate with wicket gate including fabrication and supply of steel and construction of boundary pillars etc. all complete for each zone as per type design / Drawing provided by department and as per direction of engineer incharge..

Providing and laying 60mm thick factory made cemetn concrete interlocking paver block of M-30 grade made by block Making Machine with strong vibratory compaction of approved size, design and shape , Laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction engineer incharge.

Earth filling in water works compound (2.27)

Elecrical and mechnical works Works

Transportation of Rig Machine, Air Compressor, O P Unit and camp equipages, connected T&P and necessary material required for drilling up to site of work, including loading, unloading etc. complete. For Zone-1, 2, 3 & 4

Errection and leveling of rig machine and barricading at site of work.For Zone-1, 2, 3 & 4

Dismantling of rig machine and clearance of site after satisfactory completion of work.For Zone-1, 2, 3 & 4

Drilling of borehole by Dual rotary/ DR/ DC-RC/Percussion Rig machine.

Drilling of 600 mm dia borehole from GL to required depth.

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply and lowering of 200 mm dia MSERW fin cut plain pipe, 7.1 mm thick as per IS code 4270

Supply and lowering of 200 mm dia MSERW fin cut slotted pipe, 7.1 mm thick as per IS code 4270

200 mm dia bail plug

200 mm dia MS tube-well cap

Supply & fixing of 200 mm dia M.S.D.I. housing clamp & girder set

Drilling of borehole by Dual rotary/ DR/ DC-RC/Percussion/ Rig machine.

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply and lowering of 175 mm dia MSERW fin cut plain pipe, 5.4 mm thick as per IS code 4270

175 mm dia bail plug

175 mm dia MS tube-well cap

Supply & fixing of 175 mm dia M.S.D.I. housing clamp & girder set

Drilling of borehole by Dual rotary/ DR/ DC-RC/Percussion Rig machine.

Drilling of 600 mm dia borehole from GL to required depth.

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply and lowering of 200 mm dia MSERW fin cut plain pipe, 7.1 mm thick as per IS code 4270

Supply and lowering of 200 mm dia MSERW fin cut slotted pipe, 7.1 mm thick as per IS code 4270

200 mm dia bail plug

200 mm dia MS tube-well cap

Supply & fixing of 200 mm dia M.S.D.I. housing clamp & girder set

Drilling of borehole by Dual rotary/ DR/ DC-RC/Percussion Rig machine.

Drilling of 600 mm dia borehole from GL to required depth.

Preparing & lowering of tube well assembly starting from G.L to the required depth including cutting, welding as required at site complete with all T&P required.

Supply and lowering of 200 mm dia MSERW fin cut plain pipe, 7.1 mm thick as per IS code 4270

Supply and lowering of 200 mm dia MSERW fin cut slotted pipe, 7.1 mm thick as per IS code 4270

200 mm dia bail plug

200 mm dia MS tube-well cap

Supply & fixing of 200 mm dia M.S.D.I. housing clamp & girder set

Supply & shrouding of pea gravel in between bore & tube well assembly to the entire depth of tube well.

Development of TW by 300 PSI/900 CFM Air compressor as below including Erection of compressor at site of work. For each Zone.

Running of compressor for development and testing of tube well.

Development of TW by suitable size of OP Unit as below including Erection of OP Unit and camp equipage at site of work.

Lowering of suitable size submersible pump motor set with column pipe and running of D.G. Set, running of OP Unit for development and yield test of tube well. For each Zone.

Geological survey of site For each Zone.

Chemical & bacteriological testing of water sample For each Zone.

Supply of submersible pump capable of delivering 600 Lpm discharge at 55 mt. head with 12.5 HP electric motor to be operated on 415 volt (+\- 10% ), 3 phase,50 C\s AC supply with 5 Mtr. submersible cable.

Supply of spare pumping plant as above .

Supply of submersible pump capable of delivering 200 Lpm discharge at 55 mt. head with 5.0 HP electric motor to be operated on 415 volt (+\- 10% ), 3 phase,50 C\s AC supply with 5 Mtr. submersible cable.

Supply of spare pumping plant as above .

Supply of submersible pump capable of delivering 300 Lpm discharge at 55 mt. head with 7.50 HP electric motor to be operated on 415 volt (+\- 10% ), 3 phase,50 C\s AC supply with 5 Mtr. submersible cable.

Supply of spare pumping plant as above .

Supply of submersible pump capable of delivering 300 Lpm discharge at 55 mt. head with 7.50 HP electric motor to be operated on 415 volt (+\- 10% ), 3 phase,50 C\s AC supply with 5 Mtr. submersible cable.

Supply of spare pumping plant as above .

Smart electrical panel cum starter suitable for automation of 15 HP capacity .

Supply of 100 amp. 3 phase with neutral main switch with enclouser and HRC fuses.

Supply of submersible cable 1x3x16 sq.mm .

Supply of aluminum armored cable 25 sq.mm 3.5 core .

SUPPLY OF MAIN PIPING AND VALVE OF 65mm/50mm DIA HAVING FOLLOWING ITEM as per requirement .

C class M S column pipe (confirming IS: 4270 or latest IS code) in 3 mt. length with interlocking arrangement (flanged/socketed) .

CI D\F PN-1.6 Sluice Valve with hand wheel .

CI D\F PN-1.6 Reflux Valve .

MS D\F pipe of 1.5 Mt. length- 2 Nos, MS D/F pipe of 1.0 Mt. length-1 No., Ventury - 1 No, Tee-1 No, CI D\F bend-2 Nos, TW Cap-1 No., Packing & nut bolt etc. - 1 Lot. For each Zone

S/o 150 mm dia M.S.D.I. clamp set .For each Zone

S/o Jointing material for wiring connection including lugs, thimble, insulation tapes etc.For each Zone

S/o Pressure Gauges with control cock & fitting, nipple, pipe, elbow etc complete- 10Kg/Sq Cm.For each Zone

Installation & testing of pumping plants and accessories. For each Zone

SITC of dozing pump with all necessary connecting accessaries complete. For each Zone

Testing of pumping plants at manufacture`s works. For each Zone

Earthing with G.I Earth plate of 600mmx600mmx 6mm size including accessories and providing masonry enclosure with providing and fixing 25mmx5mm GI strip on surface or in recess for connections with charcoal, salt as required. For each Zone

Supply of 3 ton capacity and 4.5 mt. lift chain pulley block . For each Zone

Supply of rubber resistance insulated sheet 2M x 1M x 25mm thick. For each Zone

Supply of three phase rolling contact servo voltage stabilizer 50 KVA capacity with input voltage range 300 to 480 with constant output of 415+/-1% complete in all respect ONAN Type. For each Zone

Earthing with G.I Earth plate of 600mmx600mmx 6mm size including accessories and providing masonry enclosure with providing and fixing 25mmx5mm GI strip on surface or in recess for connections with charcoal, salt as required. For each Zone

Installation, Testing & commissioning of Three phase servo voltage stabilizer. Zone 1,3 & 4

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. For each Zone

Wiring for circuit/sub main along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required. For each Zone

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of metal box of 180 rnmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required. For each Zone

Supply and fixing of following way S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/RCCB/Isolator) For each Zone

6 Way double door ,

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required. For each Zone

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.For each Zone

Supply and fixing of 20 W LED tube light complete in all respect (Bajaj/Philips OR Equivalent make) For each Zone

Supply in fixing of LED external lighting luminaries with mounting bracket etc. complete. For each Zone

O & M of pumping plant for six months.For each Zone

AWASTHI TUBEWELL COMPANY

ESPY ASSOCIATES