Enquiry No I-13095/WEB/CONT/BT

Amount

Excavation in solid slag or soft rack not requiring blasting to all depths from surface including disposal of the soils within a lead 0f 2 K.M.

Earth work in excavation for Foundations of buildings, equipments, trenches, drains, culverts, manholes, etc., in all types of soils including earth mixed with slag/slag/soft rock/is integrated rock, in both Dry and Wet conditions,

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

CENTERING AND SHUTTERING INCLUDING STRUTTING, PROPPING ETC. AND REMOVAL OF FORM WORK FOR: LINTEL, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars

Neat cement punning

Finishing walls with textured exterior paint of required shade :Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

P/F ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains of shutters 35mm

52 MM THICK CEMENT CONCRETE FLOORING WITH CONCRETE HARDENER TOPPING UNDER LAYER 40 MM THICK CEMENT CONCRETE 1:2:4

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: 125 x 85 x 5.5 mm (heavy type) In place of stainless steel butt hinges (item no. 26)

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300 x 16 x 5 mm.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250 x 10 mm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood

Providing and fixing bright finished brass handles 125 mm with screws etc. complete :

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including a coat of steel primer.

PROVIDING AND FIXING OXIDISED M.S. SLIDING DOOR BOLTS WITH NUTS AND SCREWS ETC. COMPLETE. 300*16 MM.

6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand)

CUTTING JUNGLE INCLUDING UPROOTING OF RANK VEGETATION, GRASS, BRUSH WOOD, TREES AND SAPLINGS OF GIRHT UPTO 30 CM MEASURED AT A HEIGHT OF 1 M ABOVE GROUND LEVEL AND REMOVAL OF RUBBISH UPTO A DISTANCE OF 50 M OUTSIDE THE PERIPHERY OF THE AREA

FILLING IN PLINTH WITH BEST AVAILABLE LOCAL SAND UNDER FLOORS INCLUDING WATERING, RAMMING CONSOLIDATING AND DRESSING COMPLETE

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finish & reinforce - All work up to plinth level:1:1.5:3(1cem:1.5 cor sand:3 graded stone agg 20 mm nominal size)

RANDOM RUBBLE MASONRY WITH HARD STONE IN SUPERSTRUCTURE INCLUDING LEVELLING UP WITH CEMENT CONCRETE 1:6:12 ( 1 CEMENT : 6 COARSE SAND :12 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE ) WITH CEMENT MORTAR 1:6 (1 CEMENT : 6 COARS SAND)

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with h

Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade

SUPPLYING AND STACKING OF MOORUM AT SITE.

Supplying and stacking at site. Stone screening 13.2 mm nominal size (Type A).

Supplying and stacking at site.63 mm to 45 mm size stone aggregate.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up

JUGAL AND CO

PURNIMA ENGINEERING AND CONSTRUCTION COMPANY

VARUN ENTERPRISES

M/S. P.B ENTERPRISES

GARG ENGINEERING AND CONSTRUCTION PRIVATE LIMITED