PROVISION OF HARD STANDING AND PARKING SHED AT MT SECTION INS GARUDA AND OTHER SANCTION WORKS OF AGE BR III UNDER GE NW KOCHI

Amount

M&L providing Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer 10 mm thick in CM 1:3 compleate all as specified and directed by Engr- In- charge.

S & F 605 x 605 mm size of grid Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

S & F Hangers 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60 mm long compleate all as specified and directed by Engr- In- charge.

S & F 4 mm thick Non asbestos fibre cement buliding boards fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling flat or sloping compleate all as specified and directed by Engr- In- charge.

M & L for preparation of new or previously untreated ceiling surfaces of any description, exc. 10 cm width of girth and applying one coat of distempering over a coat of chalk whiting on plastered surfaces, preparatory to distempering compleate all as specified and directed by Engr- In- charge.

S&F for Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified compleate all as specified and directed by Engr- In- charge.Make :- JINDAL or equivalent section from HINDALCO/INDALCO/MS AJITH IND PVT LTD.

S&F Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified compleate all as specified and directed by Engr- In- charge.Make :- JINDAL or equivalent section from HINDALCO/INDALCO/MS AJITH IND PVT LTD.

S&F for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fix to wood/aluminium joinery compleate all as specified and directed by Engr- In- charge.Hindustan pilkinton glass work Ltd/ Modiguard

M&L for 12 mm thick Prelaminatd particle board, exterior grade, prelaminated both side with decorative choice lamination with screws to timber frame work compleate all as specified and directed by Engr- In- charge.

S&F solar suncontrol film 25 micron refelective type exc 1.5sqm compleate all as specified and directed by Engr- In- charge.

S&F for Door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed compleate all as specified and directed by Engr- In- charge.

Complete removal of existing treatment of exterior surface incl washing, rubbing, downstopping of distempered and painted surface compleate all as specified and directed by Engr- In- charge.

M&L for applying a coat of primer and two coats of apex/ ultima antifungal paint over primer compleate all as specified and directed by Engr- In- charge.

M&L for complete removal of existing treatment from walls & two coats of oil bound distember over a coat of alkali resistant primer compleate all as specified and directed by Engr- In- charge.

S & F for 18/19 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in table top, cup board shutters, partitions, shelves etc. compleate all as specified and directed by Engr- In- charge.

S & F 30 mm width of flaps continuous (piano) hinges, mild steel, bright finish or electrogalvanised compleate all as specified and directed by Engr- In- charge.

S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright, bright finished compleate all as specified and directed by Engr- In- charge.

S & F second class hard wood (CHIR) plain fillets square, rectangular or traingular in section, clean sawn secured with nail sectional area 6 sqcm but n.exc. 13 sqcm compleate all as specified and directed by Engr- In- charge.

S & F 75 mm long brass handles, cast type, polished bright compleate all as specified and directed by Engr- In- charge.

S & F for 50 mm size brass two levers lock cupboard, grade I compleate all as specified and directed by Engr- In- charge.

S & F mild steel magnet cacher of size 50 mm long body compleate all as specified and directed by Engr- In- charge.

S & F for mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5 cm not exc 10 cm and dia of shank 11 to 15 mm compleate all as specified and directed by Engr- In- charge.

S&F for anodised aluminium alloy harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc compleate all as specified and directed by Engr- In- charge.

M & L for pre-cast cement concrete block masonry with solid blocks of cement concrete exc. 10 cm width and setting in cement mortar 1:6 type C-1, 1:3:6 (using 20 mm graded stone aggregate) compleate all as specified and directed by Engr- In- charge.

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even compleate all as specified and directed by Engr- In- charge.

M&L for cement concrete type D-2, 1:4:8 (40mm graded agg) 100 mm thick as in floor, sub-base, etc. and finished the surface even and fair without using extra cement compleate all as specified and directed by Engr- In- charge.

M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required compleate all as specified and directed by Engr- In- charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment compleate all as specified and directed by Engr- In- charge.

M&L for hardcore of gauge n exc. 63 mm, using broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, wa-tered and rammed to a true surface compleate all as specified and directed by Engr- In- charge.

M&L for 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) compleate all as specified and directed by Engr- In- charge.

M&L for 75mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) incl finishing the cement concrete surface even and smooth without using extra cement compleate all as specified and directed by Engr- In- charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts,wells,cesspits,manholes,pier holes,etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft soil compleate all as specified and directed by Engr- In- charge.

Excavating in post holes (orsimilar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm compleate all as specified and directed by Engr- In- charge.

M&L for Plain Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in foundation filling and mass concrete etc compleate all as specified and directed by Engr- In- charge.

M&L for Plain Cement concrete type B-2, 1:2:4 (20mm graded aggregate) in post holes and mass concrete etc compleate all as specified and directed by Engr- In- charge.

M&L for Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc compleate all as specified and directed by Engr- In- charge.

M&L for providing RCC M-30 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete compleate all as specified and directed by Engr- In- charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter compleate all as specified and directed by Engr- In- charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square rectangular or polygonal in shape with rough finished faces compleate all as specified and directed by Engr-In-Charge.

M&L for providing RCC M-30 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts Compleate all as specified and directed by Engr-In-Cgahrge.

S&F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips compleate all as specified and directed by Engr- In- charge.

ditto as item No 41 here-in-before but 6 to 8 mm dia compleate all as specified and directed by Engr- In- charge.

M&L for providing 10 mm thick cement plster in 1:4 compleate all as specified and directed by Engr-In-Charge.

M&L for Providing 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing compleate all as specified and directed by Engr-In-Charge.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations compleate all as specified and directed by Engr-In-Charge .

S&F for 8 inch height brass letters with glosy finish including fixing charges compleate all as specified and directed by Engr-In-Charge .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcompleate all as specified and directed by Engr-In-Charge .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point compleate all as specified and directed by Engr-In-Charge.

S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) compleate all as specified and directed by Engr-In-Charge .

Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in?cluding cleats, brackets, et compleate all as specified and directed by Engr-In-Charge .

M&L for preparation of new iron or steeel surfaces and applying two coats of synthetic enamel pint over a coat of red oxide / zinc chrome primer compleate all as specified and directed by Engr-In-Charge .

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 compleate all as specified and directed by Engr-In-Charge .

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleatsfor securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 compleate all as specified and directed by Engr-In-Charge .

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specifiedcompleate all as specified and directed by Engr-In-Charge .

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiecompleate all as specified and directed by Engr-In-Charge .

M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less compleate all as specified and directed by Engr-In-Charge .

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound compleate all as specified and directed by Engr-In-Charge .

Supply and installation, testing and commissioning of split type air conditioner unit 2.0 TR capacity (inverter type) complete with card less remote control, minimum 3 star labelled, eco friendly refrigent gas , 6000 K Cal /Hr 50HZ, 240 volts air cooled condenser with the accessories varied speed including fixing the outdoor unit with suitable factory fabricated steel frame stand as per suitable site requirement and fixing of room (high wall) unit on wall with neccessary wall cutting/making holes to pass the refrigerant pipes, drain pipes, cables etc and makimg good with exsting finishing compleate, providing and making interconnection including copper refrigerant piping with nitryle rubber insulation and control cable from indoor to outdoor upto a distance of 3.0 mtrs as provide by OEM, power cabling (Max 3.0 mtrs from isolator/ encloser) to unit, first charging of refrigerant gas including cadless remote, darin piping of suitable syze including connecting darin lines from unit to nearest drain points compleate all as specified and directed by Engr-In-Charge. Make : Llyod

Supply and installation, testing and commissioning of split type water cooler with purifier ozone based technology cooler stailess steel body cold, hot and normal water output most superior water purification technology ozonisation, based on microprocessorm, controlled electronic system industrial model with dispenser to ensure the prices operation 90 Lt/Hr dispensing capacity and steel storage tank and connecting up including taking down the exsting old u/s cooler from exsting location trasporting and deposting to MES store yard compleate all as specified and directed by Engr-In-Charge.

S&F Voltage stablizer 4 KVA capacity suitable for water cooler of automatic operation single phase naturally air cooled indoor type & designed + 2.5% and speed of correction 8volts per second , fixed on wall with neccessary arrangements complete all as specified and as directed.

S&F Voltage stablizer suitable for Inverter split air coditioner for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140V to 280V with output voltage stablized at 230 with accuracy + 2.5% and capcity suitable for 2.0 TR Inverter AC complete all as specified and as directed by Engr-In-Charge . Make: V Gaurd / AE/Microtek.

S&F of single pole and neutral enclosure with a two pin and earth plug and socket compleate with one single poleMCB sp 20Amp at 240 volts 10 KA, C curve and plug to with male end portion complete all as specified and as directed by Engr-In-Charge .

M&L for sub main wiring with 4 runs of 10 Sqmm PVC insulated multi standed copper cunductor cable including PVC conduit with 1 run 10 Sqmm cable earth wire complete all as specified and as directed by Engr-In-Charge

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated multi standed copper cunductor cable including PVC conduit with 4 Sqmm cable earth wire complete all as specified and as directed by Engr-In-Charge

S&F MCB SPN 6-32 A 230V , 10KA C- Curve complete all as specified and as directed by Engr-In-Charge .

S&F MCB TPN 63 A 415 V , 10 KA - Curve complete all as specified and as directed by Engr-In-Charge .

S&F sheet meatal enclosure TPN 4 way double door with 200 Amps rated bus bar complete all as specified and as directed by Engr-In-Charge .

S&F 32 mm PVC flexible hose heavy duty complete all as specified and as directed by Engr-In-Charge .

S&F 20 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and as directed by Engr-In-Charge .

SUKU CONSTRUCTIONS

MS BUILDERS

Albert Rebello and Company

M/s Antony Kallarakkal

K.V.GEORGE AND COMPANY

THOMSONS CONSTRUCTIONS