Repair to floor, plaster, roof ceiling, joinery, sanitary, painting, sewage line, path drain and internal electrification of Offrs/JCOs/OR and OTM ACCN of RIMC under AGE B/R-I of GE Dehradun

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed

Dismantling of framed timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F for false ceiling with Everest Fibre Cement Designer tile Ivory painted (High pressure steam cured) of 4mm thickness (as per IS: 14862) of size 595 x 595 mm and any one of the design (Ocean, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15 x 32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15 x 32 mm made of 0.30 mm sheet, 1200 mm long spaced between main "T" at 600 mm c/c to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 15 x 32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 15 x 20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making , opening for services like diffusers, grills, light fittings, fixture, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3 mm dia with galvanised butterfly level clips, spaced at 1200 mm c/c along centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/Sqm, including refixing of any type of wire complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specfied and directed

Taking down chowkhats or frames exc 1.50 sqm but nexc 4.0 with shutters (without taking off shutters from the frames) complete all as specfied and directed

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed

S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Make Century Ply/Kitply

M/L 35mm thick Golden teak wood as in Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified and directed Note:- Glass/wiremess shall be measured and paid saperately

M/L 30mm thick Golden Teak wood as in Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified.

M/L 30mm thick Golden Teak wood as in Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. complete all as specified.

S&F Golden teak wood as in Plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints, complete all as specified

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified. Make : ECHON/Sintex/Rajshree

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge. Make : ECHON/Sintex/Rajshree

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree

Taking down wooden panel or gauged shutter of any thickness and size and refixing in same opening after tightening the loose parts and joints, refixing/resetting the iron mongry and steel wire cloth any type etc including painting complete door with two coat of synthetic enamel paint on old surfaces.

S&F Galvanised steel coated/powder coated window fabricated from rolled section Frame size 71.5mmx 55mm x 0.58 mm thick and shutter section size 47mmx20.20mmx 0.58 mm including SS pivot hinged, seccolour make handle and tower bolt complete with glazing bars dovetailed or welded all as specified and directed Make ASECO 4000

S&F Galvanised steel coated/powder coated window fabricated from rolled section Frame size 71.5mmx 55mm x 0.58 mm thick and shutter section size 40mmx20mmx 0.58 mm including SS pivot hinged, seccolour make handle and tower bolt complete without glazing bars dovetailed or welded all as specified and directed Make ASECO 4000

M&L plain fillets 2nd class Hard wood exc 13 & n exc 25 Sqcm Square or rectangular in section, wrought secured with nails or barbs

S & F Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe 290. Gde-E-165

S&F Stainless steel 304 grade butt hinges, medium weight 100 mm size complete all as specified

S&F Stainless steel 304 grade butt hinges, medium weight 75 mm size complete all as specified

S&F 200 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel 202 grade bright finish barrel tower bolts 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge.

S&F in repair 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc complete of approved quality.

S&F in repair Hasp and staple 100mm safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.

S & F in repair Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all specified and directed

S&F magnet catcher for cub board with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts SS204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod incl brackets, decorative finials at both ends & curtain rings 8 Nos (Minimum) complete. (Note : Sample/ design approved by Engineer-in-charge)

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average aperature 1.18 mm complete all as specified

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 100.00 x 44.45 x 2.00 mm including 5 mm thick Alex Sheet/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure complete all as specified and directed Note:- Work executed at the height of 6.0 M as Gable end of wall.

Demolition of cement concrete ground floor and paving nexc 15cm thick (below or above ground level)

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock rail 37.50x15x1.60 mm Shutter stiles size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Supply and fix powder coated anodised aluminum Grill made of 6mm dia aluminum bars, size of mesh 50mm X 50mm fixed together with aluminum frame for window complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

M&L 40mm thich PCC in 1:2:4 type B-1 (using 20mm graded aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified

Supply only glass dividing strips, 3 mm thick 38 mm with inserted in position to confirm to design.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed .

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed .

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) as in skirting cut from tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slury and pointed in white or coloured cement to match including screed bed 10mm thick in cm 1:4 all as directed.

S&F double charged vitrified ceramic tiles 10mm thick exc 0.36 Sqm but n exc 0.42 sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 for fixing of tiles complete all as specieid and directed.

S&F double charged vitrified ceramic tiles 10mm thick in skirting cut from the tiles exc 0.36 Sqm but n exc 0.42 Sqm each in verticle surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer in CM 1:4 all as specieid and directed.

M&L heavy duty endura coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

M&L 25 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone agg as in floor for laying floor finishes.

M&L for prepolished makrana white Marble tiles 30cmx30cm x 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L for Granite(of any type) tiles of size 30cmx30cm20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed

M&L Udaipur green stone for flooring slabs 12-15mm thick over 15 mm thick cement screed bed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rounding of edges of stone.

M&L 18 to 20 mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and as directed.

M&L for Cement concrete chequred tiles with grey cement and pigment of any shape and size of 25mm thick, Rubber moulded set, jointed and poin ted in neat cement slurry in floors, and cut and polished over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified Make : NTC

M&L for 60 mm thick rubber moulded interlocking paver block with grey cement and pigment of any shape and size over and including 20 mm sand cushioning complete all as specified. Make NTC

M&L for 100 mm thick cement concrete in 1:4:8 type d-2 ( 40 mm graded aggregate) as in sub base of floor complete all as specified

M&L for Machine cut kota stone slab flooring 15-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specifeid

M&L for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specifeid

M&L for 25mm thick terrazzo topping with 4 to 7 mm size marble aggregate including grinding and polishing in floors including demolition of existing flooring and removing rubbish out of defence land complete all as specified and directed by Engr-in-charge

M&L for 2 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting sealed down with an approved adhesive including dismantling of exixting flooring complete all as specified

M&L for grinding and polishing on existing terrazo /stone flooring , dado skiring etc, by machine or by hand with 120 to 150 grit size carborendum stone cleaning and washing the surfaces rubbed hard with felt and slightly moistened auxalic acid powder @ 5 gram per sqm complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works.

M&L for reinforced cement concrete (nominal mix) 1:2 :4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.

S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water complete all as specified

M&L rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and fair without using extra cement complete all as specified

M&L renderinng 15 mm thick on fair faces of brick work in cm 1:4 and finished even and fair without using extra cement complete all as specified

M&L for preparation of new surface of wall and applying two coat of cement base paint of wall over a coat of white wash complete all as specifed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of New plastered or unplastered surfaces of walls and applying two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of old surface of wall and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of old surface of wall and applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Complete removal of existing treatment of wall by mechanised method and applying two coat of white putty and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.complete all as specified

Complete removal of existing treatment of wall by mechanised method and applying two coat of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.complete all as specified

Complete removal of old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and applying two coat of synthetic enamel paint over a coat of putty complete all as specified and directed

M&L for preparation of old wooden surface of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

M&L for preparation of old steel surface of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

All as per item No 98.00 here in above but 20mm.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified

S&F in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe including Health faucet complete all as specified and directed (Make : Hindware/Cera/Parryware).

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as directed.

S&F in repair vitreous china wash hand basin, white flat back, size 580x450mm excluding taps but including waste pipe , brackets all as specified

S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed

S&F in repair Urinal Flat Back of size 360 x 330 x 740 mm with chromium plated bottle trap fixed to wall complete all as specified

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed

S&F in repair 15mm bore chromium plated fancy type long body bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified

S&F in repair chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified

S&F in repair 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed

S&F in repair 15 mm dia pillar taps, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as directed

S&F in repair 15mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed

S&F brass chromium plated wall mixer with telephonic shower, complete all as specified and directed. Make : Jaguar ESSCO Cat part No DLX 517 (wall mixer) EHS 551 (hand shower) and SHA 571 (tube) (Shower) Marc cat No. ES517AKES531 (Shower)/ Pearl MAR 088 (Wall mixer) HS 470 (Hand shower with tube)

S&F Brass chromium plated wall mixer (3 in 1) complete all as specified and directed. Make: Jaguar Model No CON 281KN, HSH 1929 & OHS 1989/ SHA 477 ES549 ES546 ES547A & ES 531 (Telephone shower)/ Pearl MAR 090 (Wall mixer)HS470 (Hand Shower with tube)SHO 525 (Shower) SH 516 (Arm).

S&F CP central hole basin mixer fancy type 15mm dia all as specified and directed. Make : Jaguar ESSCO Model No. DLX 516, Mark: ESSCO ES-516/Pearl Mar 087

supply and fix in brass spindle for bib tap, pillar tap, stop cock,angle valve, wall mixture and basin mixture of any description etc, complete all as specified and directed.

S&F in repair 500 ltrs capacity Triple layered Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified

S&F in repair 1000 ltrs Triple layered capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified

Supply and fix in repair 20 mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S&F in repairs PVC tank lid/cover sintex water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks, complete all as specified and directed.

S&F in repair 15mm chromium plated brass heath faucet or Jet with all fittings for water closet all as specified and directed

S&F in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified

S&F in repair 32 mm Waste fittings /coupling brass, chromium plated for wash hand basin, basins, etc. with long screwed shanks and fly-nuts complete all as specified

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes fittings / coupling including 32 mm waste pipe over and incl beding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting unoin to pipe overall size 915mm x 460mm bowl size 410mm x330mmx 160mm complete all as directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastesfittings / coupling including 32 mm waste pipe over and incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified

S&F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified and directed Make Jaguar (Cat Part No: AHS-CHR-1581H)

S&F in repair chromium plated toilet paper holder fixed on wall with PVC Rawal plug complete all as directed Make Jaquar code no-ACN-CHR-1151N

S&F in repair stainless steel soap disc fixed with rawl plug complete all as specified

S&F in repairs CP Jet spray for EWC with complete fitting all as specified. Make Pearl cat No. JS052/Prayag cat No. BEA 40S/ESSCO ALE 547/ Jaquar.

Cleaning of existing water storage tank with vaccume cleaner machine exc 250 but nexc 500 ltrs capacity with liquid bleach and dry with and apply on coat of anti bacterial spray and refing including cleaning float with five steps as per PS Clause. Date of cleaning to and CA No to be painted on water storage tank with stencil in black/ white synthetic enamel paint all as directed by Engr-in-Charge.

Cleaning of existing water storage tank with vaccume cleaner machine exc 500 ltrs but nexc 1000 litr capacity with liquid bleach and dry with and apply on coat of anti bacterial spray and refing including cleaning float with five steps as per PS Clause. Date of cleaning to and CA No to be painted on water storage tank with stencil in black/ white synthetic enamel paint all as directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed by Engr-in-charge

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge

Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.

S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected

M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces finished even and smooth and Setting coat 3mm thick, trowelled to even and smooth finish as in manhole and foul condition complete all as specified

Cutting into existing Manhole for removing existing Branch Drain pipes, Making good to brick wall and rendering, cutting out branch channe and makin good in cement concrete (1:2:4) (20mm graded stone aggregate) and reform in benching for 150mm internal dia drain pipe in foul conditiion, complete all as specified and directed.

M&L for cleaning of existing seawage pipe line 100mm /150mm/200mm internal dia at any depth including manholes by removing the manhole cover of any type/size and cleaning by means of hydraulic jet pressure machine/ manually (as directed by Engr-in-charge) as required at site from manhole and well flushing with water after cleaning including getting out sludge and disposal out of defence land , refixing the manhole in original complete all as specified and directed

M&L cleaning the blockage of bathroom/ kitchen by cleaning the nahani traps/ gully traps of all the mud /sludge and getting out, washin thoroughly grating of trap,CI waste pipes by opening the clearing eyes and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters form the gully trap and covering the same with the soil obtained from excavation of pit including all excavatons and earthwork complete all as specified and directed by Engr-in-Charge.

M&L cleaning of blockage of WC indian or European type by removing of all the mud/sludge and getting out depositing the sludge in a pit of suitable size at a distance n exc 50 mtr from the WC excavations and earth work complete all as specified and directed by Engr-in-Charge.

Cleaning of manholes any depth any size taking out accumulated, soil, sludge any material incl both ends and removal to MD lands and manhole cover refixing complete all as specified and directed by Engr-in-Charge.

Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposal (5000 ltr capacity) of out of MD land as directed by Engr-in-Charge. Note :- For cleaning and attending the complaint comprising the following to clear the blockage of WC, grating and gully trap. (a) Minimum 01 person will be present on all working days 0900hrs to 1700hrs for maintenance and report to AGE B/R-I Sub Div. (b) If contractor representativ (Safaiwala) is not to report daily to B/R complaint cell, Rs 450/- will deducted from the contractor payment for the absent period.

M&L for 65 mm thick reinforced precast cement concrete 1:1:2 type B-1 (using 20mm graded stone aggregate) as in man cover bromatic slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work including 2mm thick CR sheet with 2 coats of bitumen paint and two nos counter sunk handle 12mm dia to surface, complete all as specified and directed.by Engr-in-charge (Note : CA No and Date will be engraved on slab).Note: (Reinforcement shall be measured and paid saperately)

S&F TMT MS bar 6 to 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified and directed by Engr-in-charge

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified

Supply only Chain link MS galvanisd fencing (thickness of wire 2.50 to 3.15 mm), any size or type complete all as specified

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W(Gde E-250) quality-A complete all as specified and directed

M&L for Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified

M&L for Cement concrete in 1:3:6 Type C-2 ( 40mm graded aggregate) as foundations, filling and mass-concrete complete all as specified

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified directed by Engr-in-charge

M&L for Providing precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) fixed in cement mortar 1:4 as in louvres and jallies, 25mm thick (mea-sured solid), including all mouldings including frame complete all as specified

S&F precast reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified

M&L for Cement concrete in foundations in 1:4:8 type D-2 ( 40 mm graded aggregate ) filling and mass-concrete complete all as specified and directed

M&L for cement concrete in 1:2:4 type B-2 (40 mm graded aggregate ) as in surface channel and drain complete all as specified

S&F in repair Expanded metal weight nexc 4kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. (Note: Colour code shall be maintained as per IE rule)

(a) One light point/ bell point/ Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan point controlled by one-one way switch.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No. 168.00 here in above but one 3 pin socket outlet 15 Amp independent, cable 2.5 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral, with 2.5Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade, FRLS grade in existing PVC / Steel, concealed conduit including MS box of thickness not less than 1.2mm for, mounting of switches, sockets, fan regulator etc including 3 mm thick bakelite hylam laminated sheet as top cover, one green colour FRLS cable of 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS grade as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Engr-in-charge . The wiring to be done as per IE rule and maintain colour code accordingly

(a) One light point / bell point/ Exhaust fan point controlled by one-one way switch.

(b) One Ceiling fan point controlled by one-one way switch.

(c) One three pin 5 Amp socket on independent board

All as per item No. 170.00 here in above but one 3 pin socket outlet 15 Amp independent, with 2.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as phase and neutral, with 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories including continous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of following. (Note: (i) Flush metal boxes and cover plates shall be meassued separately . (ii)Colour code shall be maintained as per IE rule)

(a) One light point/ bell point/ Exhaust fan point controlled by one-one way switch.

(b) One ceiling fan point controlled by one-one way switch.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No. 172.00 here in above but one 3 pin socket outlet 15 Amp independent, cable 2.5 Sqmm Pvc insulated unsheathed multistranded copper cable FRLS for phase & neutral, with 2.5Sqmm PVC insulated unsheathed multistranded copper conductor cable FRLS as earth continuity conductor.

S&F moduler switch piano flush, button type 6 Amp SP one module one way complete all as specified Make : Legrand model Lyncus 6772.00 eqvt in L&T model entice/ Havells model Murano.

S&F moduler switch piano flush button type 16 Amps SP one module one way complete all as specified Make : Legrand model Lyncus Cat No 6772.09 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet multipurpose 5 Pin 6 Amp two module complete all as specified & directed. Make : Legrand model Lyncus Cat No 6772.28 eqvt in L&T model entice/ Havells model Murano.

S&F moduler socket outlet two in one three pin 6 Amp and 16 Amp two module flush type complete al as specified.Make : Legrand model Lyncus Cat No 6772.30 eqvt in L&T model entice/ Havells model Murano.

S&F moduler bell push 6 Amp one module one way complete all as specified. : Make : Legrand model Lyncus Cat No 6772.20 eqvt in L&T model entice/ Havells model Murano.

S&F 4 step modular electronic fan regulator step type 2 module 120 watts 360 degree.Make : Legrand model Lyncus model 6772 41 eqvt in L&T model entice/ Havells model Murano.

S&F in replacement of rusted GI sunken box with flush metal GI box 1/2 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting as per existing to match the wall complete all as directed.

All as per item no 180.00 here in above but 3 module.

All as per item no 180.00 here in above but 4 module.

All as per item no 180.00 here in above but 6 module.

All as per item no 180.00 here in above but 8 module.

S&F combind cover plate white 1 module suitable for modular switches. Make : Legrand model Britzy Cat No 6734 91 eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 2 module suitable for modular switches. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 3 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 4 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 6 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F combind cover plate white 8 module suitable for modular switch/socket. Make : Legrand model Lyncus eqvt in L&T model entice/ Havells model Murano.

S&F switch piano flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F switch piano flush button type 15 Amps SP 250 Volt AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet 2-in1,3 pin 5 and 15 Amp flush type 250V AC complete all as specified & directed.

S&F Bell push flush, button type 5 Amp SP 250 Volt AC complete all as specified & directed.

S&F Bell Ding dong 250V AC complete all as specified & directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified and directed.

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC. complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed.

S&F in replacement wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make: Philips cat part No BN021C LED 20S PSU CWGR S2 / Wipro Cat part No LL20 281 XXX 65AL 1 / Havells Cat Part No ENDURA LIINEARNEOBS20W LED 865SPCWH

S&F in replacement Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 4000K & lumen input output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge Make : Crompton cat part No LCDN-12-CDL/TL/WW/Wipro cat No LD80-101-XXX-60-XX/Philips Cat No DN092B LED10S-3000-PSU-WH

S&F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 15 Watts LED Lamp incl one LED New Odore 10W E27 WW Ball Lamp Lumen output 835 (lm) 3000K complete all as specified and directed by Engineer-in-charge Make : Havells (City-1) cat part No LHDL02160099 (Fitting) LHLDERHEMD8X010(Lamp) or eqvt in Wipro / Philips / Mepro.

S&F in replacement of energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed by Engr-in-charge. Make : Havells/PhilipsWipro

S&F in replacement mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. . Make Havells Cat No E-Lite Pride LHEXBLP7IN1W009 or equilent in Philips/Wipro

Supply and fixing in replacement New generation energy saving and environmental friendly long life LED Street light luminaire Endura Pearl Neo made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 with separate surge protection 5KA, 40 Watts or near higher size with making all arrangement for fixing light fitting such as replacement of GI pipe bracket made of 40 mm bore medium grade pipe made to shape of 1200 of 70 cm and 50 cm to a overall length of 1.2 mtr for fixing of street light fitting including MS clamps of size 32 x 3 mm flat iron, nuts, bolts and washers of required size painting complete with all necessary electric connection etc all as specified and directed incl taking down the existing unserviceable bldg security light fitting complete all as specified and directed Make : Havells cat part No ENDURAPEARLNEOSL40WLED757PASYTOPC/CG Cat No LSTP-45-CDL / Philips Cat No BRP046 LED 36 CW MR S1 PSU GR /Greenstar DSS 40.

S&F in replacement TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for 04 pole MCCB as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge incl taking out Unserviceable DBs, MCCB and MCBs of any capacity complete all as specified and directed. (MCB and MCCB shall be paid for separately)

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door 12 way IP-43 DB's mounting flush on wall/concealed and making good distubed surfaces incl taking out Unserviceable DB any capacity. complete all as specified and directed by Engr-in-charge.

All as per item No 207.00 herein above but 8 way complete all as specified and directed.

S&F MCCB 125 Amps four pole 415 volts thermal magnetic trip release ICU=100% ICS having breaking capacity 16KA including connection terminal strip complete all as specified & directed

S&F MCB SPN 240 Volt 10 KA 40 Amp 'C' series complete all as specified & directed.

S&F MCB single pole 240 Volt 10 KA 6 to 40 Amp 'C' series complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) and one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4 Sq mm as earth wire upto common earth and connected to earth dolly drawing through and incuding PVC medium grade conduit 20 mm dia complete incl taking out old unserviceable submain all as specified & directed. Make: Havells/Finolex/L&T

All as per Item No 212.00 here in a bove but two 6 sqmm with 6.0 sqmm earthwire

Earthing complete with galvanized mild steel earth plate (electrode) 600 x 600 x 6.00 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 4 mm dia GI wire as earth wire moulded and riveted to earth plate at one end and connected to main switch/control switch of the building at another end, GI earth wire incased in and including 15 mm dia GI ‘light grade’ pipe from upper end of earth plate uopto main switch/control of the building including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of earth plate, CI funnel with wire mesh fixed on water pipe and provision of PCC chamber and RCC pit cover with lifting handle, excavation, earth work including laying the GI pipe concealed in floor /wall all as described in electrical plate No 5 of SSR Part I.

S&F in replacement tamper proof electronic single phase whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.00 and AC supply including cable connection, proper sealing with barcode with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box . The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)

S&F Meter Distribution Borard made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04 Nos incuding electrical connection with excisting system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex

Supply only fan capacitor 2.5 mfd complete all as specified and directed make universal / Havells/Epcos

Supply only fan capacitor 4 mfd complete all as specified and directed make universal / Havells/Epcos

S&F ceiling fan hanging hook clamps (for fixing to ceiling fan rod) made with using GI of suitable size as directed and with heavy duty rubber insulator and two Nos nuts and one bolts including split pin complete all as directed.

Supply and fixing of louvers shutters round or squire made out of GI sheet suitable upto 300 mm dia exhaust fan complete incl taking out old u/s complete

M/S C S AITHANI