Vellathooval GP works Mangapara Anganvadi maintenance

15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood

50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood

OD58328/2026-2027:Supplying and fixing Plain Wood finish steel doors conforming following specifications:- Plain wood designs come with decorative wood grain finish. Plain wood grain decorative finish doors offer architects the disadvantages associated with wood Long-lasting secure termite-proof fire-resistant value for money environment friendly uniform quality,SHUTTER DETAILS- Door leaf from 0.8mm to 1.2mm thick slip coated pre-galvanized steel sheet to ASIM A527/ASIM A525, JIS G 3302 or BS 2989 1994, IS 277. Zinc coating 80- 120 g s m. Lock formed Panels with internal stiffeners of 3m thick made of GP 3mm thick hinge reinforcing, hardware mounting plates and lock protection,FRAME DETAILS - Door frame conforming to IS 4351:2003, 1.2mm to 2mm thick pre-galvanized steel sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hardware mounting plates,FINISH- powder coated surface finished with thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/epoxy polyester/pure polyester/polyurethane powder of thickness 60-65 micron, FRAME ASSEMBLY - welded construction with frame spreaders. Bolted frame construction. Knockdown frame construction for around frames. FRAME THICKNESS - 1.2mm,FRAME FILLING polyurethane from (puf), DOOR THICKNESS 46mm or 30mm ,CORE MATERIAL honeycomb paper, thickness 150 gsm, load bearing capacity: 500 kg|sq m ,FIXING fixing through frame by expansion boit,STANDARD DIMENSIONS Up to 3m high and 2.4m wide subject to test data limitations (9.8 ft. x 7.87ft.)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)