Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 01 Rank₹30.9 LAccepted-AOC LEELA KUNJ VIVEKANAND CHOWK MANENDRAGARH DIST KOREA PIN 497442 | MANENDRAGARH | KOREA | CHHATTISGARH | 497442 | 01 Rank | Accepted-AOC As Recommended by Tender Committee. |
Tender Value
₹38,800
EMD Value
₹38,800
Closing Date
22 Aug 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer Civil Chirimiri Area
OFFICE OF THE STAFF OFFICER CIVIL CHIRIMIRI AREA PO WEST CHIRIMIRI DIST KOREA CG PIN CODE 497773 MOB NO. 9425533308
Repairing and strengthening of colony road at Chirimiri OCP in Chirimiri Area.
2022_SECL_252210_1
SECL/CHRM/DYGMC/22-23/ E TENDER/27 dt. 02.08.2022
Open Tender
Civil Works - Roads
Item Rate
60 days
Chirimiri
As per NIT
3 documents required · 3 mandatory
₹38,800
19 Dec 2022
8 Aug 2022
24 Aug 2022
8 Aug 2022
22 Aug 2022
9 Aug 2022
9 Aug 2022 - 14 Aug 2022
120 days
Amount
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications.
Built-Up-Spray Grout Providing, laying and rolling of built-up-spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a Base conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm.
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.@ 0.40 kg per sqm (Non-bituminous surfaces) granular base not primed.
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications @0.30 kg per sqm (dry & hungry bituminous surfaces /granular surfaces treated with primer)
Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications. a) Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor. for GradingII(19 mm nominal size) bitumen content 3.5%
Providing and applying tack coat with catonic bitumen emulsion (RS-1) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. (i) @ 0.25 kg per sqm (normal bituminous surfaces)
Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using HMP of appropriate capacity not less than 75 tonnes /hour.) Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity & finishing to required level and grade all complete as per clause 508 of specifications. a) with 60/70 butumen (VG-30)
Total impact of GST for the purpose of CTC
stage.html
html • 0.03 MB
techsummary_260657.pdf
PDF • 0.66 MB
finsummary_260657.pdf
PDF • 0.66 MB
LOI27.pdf
PDF • 1.20 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .