CA NO.CWE BLY/ GE (W) /104 OF 2025-26SPECIAL REPAIRS ROAD, PATHWAYS AND CONNECTED APPROACHES FROM ALBER EKKA MD ACCN TO CHURCH CROSSING OF CARIAPPA ROAD AT BAREILLY CANTT UNDER GE WEST BAREILLY

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 sqm include raking over and grading the broken up surfaces exc 50 mm and n exc 100 mm deep to the proper camber etc. as required.and removing complete all as specified and directed.

M&L for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and Applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metre VG-10 (Paving bitumen) complete all as specified and directed.

Supplying, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix, laid/rolled and compacted/consolidated to required camber and gradient with 8 to 10 tone power roller to a uniform smooth surface complete all as specified and directed.

M&L for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic exc 10 cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

S&F metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection in DA-953 height 1400 mm including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F Cat eye, Solar reflective type of metal body alloy of size 110mmx128mmx30mm of red / yellow / white with PAMA striplens reflector of Model -DA 971 fixed with 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed as per manufacturers instructions complete all as specified and directed.

S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65 mm) of high efficiency Mono crystafie solar panel 2.4V /0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactureres instructions etc all as specified and directed.

S&F rubber speed breaker made from heavy duty rubber and polythylene with high resistance wear and tear property, height 3" for speed restriction, colours black and yellow combination, High reflective mark showing arrows in white marked on both side of yellow and black pieces, each side having end cap of size 250x500x75mm and middle size of the speed breaker as 500x500mm with four holes fixed with epoxy and heardner and bolts with epoxy and hardener as per manufacturers instructions complete all as specified and directed.

M&L for Hardcore of broken brick of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

Demolition of cement concrete (unrinforced), in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size (IS15658-2006) of 100 mm thickness M-50 grade with grey cement and pigments over and including with 25 mm thick sand cushioning including watering complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in benching, coping, bed blocks including necessary form work, weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.