SPECIAL REPAIR TO BLDG NO P-162 (SNCOs BILLET) AT DARJIPURA AT AF STN VADODARA

Amount

Taking down chowkats or frame exc 1.5 Sqm and n exc 4.0 Sqm each (without taking off shutter from the fram) all as speified and as directed.

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the fram) all as speified and as directed.

Taking down shutter only of any description exc 1.0 Sqm n exc 2.0 Sqm and removing all as speified and as directed.

M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed

M&L Factory made flush shutters 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F 75mm long SS Heavy weight butt hinges and fixed to frame with scrwewd or welding comlete.

S&F 100mm long SS Heavy weight butt hinges and fixed to frame with scrwewd or welding comlete.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 200mm.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm.

S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

S&F for 100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked).

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sq. m in each pane incl taking down existing broken glass from metal frames complete all as specified

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified

S&F Powder coated aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

M&L Pressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified,

M&L Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate for filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new or old wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for special treatment to sunken portion (including necessary dismantling of tiles and PCC of any description and thickness alongwith) with 10mm thick plaster in CM 1:4 mixed with and including WPC liquid complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 thick plastered in CM 1:4 mixed with and including complast 421 in sunken portion of WC and CI pipe joint shall be fitted inc filling of lean concrete 1:5:10 type E2 complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes.

M&L Glazed ceramic tile coloured tile in verticle surface such as dado /skirting etc 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white and coloured cement to match over and including 10 mm thick rendering in CM 1:4 as backing coat complete all as specified.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75 mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in sub bases,floor finishes and pavings.

Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar.

M&L Machine cut Pre polished kota stone slab flooring 18-19 mm thick over and incl 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase and Kitchen platform etc.

S&F in repair vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F EWC vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flush pipe anti syphonage pipe etc and with plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of pvsc flush pipe 32mm dia 90 cm long fixed properly to inlet of EWC/IWC etc complete all as specified and as directed.

S & F PVC (SWR) 'P' trap of 110mm.

S & F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75 mm dia.

S & F Bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for union pipe of BF tails complete and fixed to 15mm dia pipe all as directed.

S & F in repair vitrous China wash basin (WHB), white, bowl type, size 550mm x 400mm (approx) excluding supply of E/F taps, but including waste pipe, 1m length anti-siphon brass chromium plated for glazed basins etc. with long screwed shackles and fit nuts, flange end embedded in red lead or similar compound fixed, chain and plug and porcelain stopper, steel brackets including casting for wall pinning in ends of brackets or erecting steel wall making connections to waste and supply pipes and complete all as specified and directed.

S & F Vitreous China urinal, half stall type white including Urinal spreader of CP, PVC waste fittings 32mm size PVC connection of 15mm size with PTMT nuts of length 450mm long including bracket complete all as specified and directed by Engineer-in-Charge.

S & F Vitreous China urinal partition white of size 310x700mm complete all as specified.

S & F tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed.

S & F CPVC Pipe, 32mm bore of pipe, of pressure rating 6 Kgf/sqcm with polyethylene thread union and check nuts, fixed to walls or in waste pipe for wash basin and urinal complete all as specified and as directed.

S & F Soap dish, SS approximately size 100x100x 50mm complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube SS and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F pillar taps swan neck type cast copper alloy with capstan heads, chromium plated screwed down high pressure with BF or without lettered Hot or cold with long screwed shanks and flynuts, screwed for union pipe and fixed to 15mm dia pipe.

S & F PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair Brass chromium plated shower rose 125mm size swivel type.

S & F in repair 15mm dia angle valves cast corper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S & F in repairs Concealed type Stop valves, fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, screwed bothends for iron pipe or for unions and fixed to 15mm bore pipe complete all as directed.

Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store

Taking up or down steel tubing and connections for 20 mm bore, including cleaning for refixing or removal to store

S&F 15mm bore GI tubes medium grade including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls,ceiling or in floors etc complete to walls and ceiling or laid in floors, etc complete and making good the area vto match with existing surface complete all as specified and directed

S&F 20mm bore GI tubes medium grade including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls,ceiling or in floors etc complete to walls and ceiling or laid in floors, etc complete and making good the area vto match with existing surface complete all as specified and directed

Taking down rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks, etc. including cleaing or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories)

Demolition and breaking up drain pipes (CI drain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), if required complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes Double/single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor incl neccesary fixing arrangement all as specified and directed.

S&F 75 mm bore PVC (SWR) Rain water pipes Double/Single socketed in any length with rubber ring joints fixed to wall or in trenches or in floor including neccesary fixing arrangements all as spd and directed all as specified and directed

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single,(single T) equal or unequal provided with access door all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius with access door all as specified and directed

S&F 110 mm bore PVC (SWR) reducers all as specified and directed

S&F 110 mm bore PVC (SWR) couplers all as specified and directed

S&F 75 mm bore PVC (SWR) junction single,(single T) equal or unequal provided with access door all as specified and directed

S&F 75 mm bore PVC (SWR) bends any radius with access door all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming Fe 410-W (Gde-E-250) quality-A complete all as spd and directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut. exc 30 cm long dia of neck exc 12mm n exc 20 mm complete all as specified and as directed by Engr-in-Charge.

M&L Preperation of new steel surfaces and applying with 2 coat synthetic enamel paint of any description over 10 cm in width or girth ,not otherwise described over a red oxide primer complete all as specified

Demolition of reinforced concrete any description and in ant position not otherwise specifically provided for all as specified and directed.

Separating, scraping and cleaning ofreinforcement (Demolition of concrete measured separately)

M&L cement concrete type B0 1:2:4 (12.5 mm graded aggregate)as in copings and other similar bands, plinth courses, string courses, lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified

M&L for grouting 40mm thick under stanchion bases or grillage,etc. including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and as directed.

Repaires to plaster of existing railings of thickness 12 mm to 20mm in patches of area 2.5 Sqm and including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of wall complete including disposal or rubbish to the dumping ground within 50m lead with cement mortar 1:4 complete all as specified and directed

Taking dawn cement plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc.

M & L 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finished even and smooth with thin layer of sagol.

M & L 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete.

Supply only integral water proofing compound (ISI Marked)

M&L Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed.

M&L Preparation of new plastered surface of wall and applying two coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed.

M&L Preparation of new surfaces of wall rubbing down and applying two coats of oil bound distemper over application of chalk whitening complete all as specified as directed

M&L Preaparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking out existing serviceable LED tubelight fitting 20W / 10 W from wall/ ceiling & Fixing only LED tubelight fitting 20W / 10 W and connecting up including provision of cable from ceiling rose/connector to fan complete.

Taking out existing serviceable Exast fan 300 mm sweep from wall & Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan Complete.

Taking down existing serviceable Geyser from site and deposited at store and refixing the same serviceable geyser after complete servicing at site complete all as specified & directed.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of metal flush box, white cover plate with frame, blanking plate etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / bell point/fan point controlled by one, one way switch 06 Amps.

All as per srl item No here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per srl item No here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per Serial Item No above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fixing Switch Piano, Flush Type, 05 Amps, single pole, one way, 250 volts, complete all as specified & directed.

Supply and fixing switch Piano flush type 15 Amps, single pole, one way, 250 volts, complete all as specified & directed.

Supply and fixing socket outlet. 2 in 1, 3 pin 5 Amp flush type complete all as specified & directed.

Supply and fixing socket outlet 02 in 01, 03 pin, 05 Amps and 15 Amps, flush type complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Supply and Fixing in repair 10W LED T5 TL fitting (300mm) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in repair MCB, DP, AC, 240 volts of 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long) complete with CI base plate and finial taper including foundation and coping

Supply and fixing LED flood light 250 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant and fixing on 50x50 mm angle iron support with brazing complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/taking out of cables,CI/GI pipe lines and getting out in sooft/loose soil all as specified and directed.

Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms in soil all as specified and directed by Engineer-in-Charge.

Removal of excavated material and deposited where directed at a distance not more than 50M from starting point and not more than 1.5M above ground level.

Taking out unserviceable/GI water main from trenches including fittings / fixtures like bend, Tee, Union, Elbow etc with flanged ends all as specified and as directed by Engineer-in-Charge.. Note: Excavation and earthwork will be measured and paid separately under appropriate items.

50 mm bore GI pipe

25mm bore GI pipe

Supply and fixing of 50 mm bore steel water Tubes, 'medium grade',galvanised,with all fitting complete to laid in trenches including taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed .

Supply and fixing of 50 mm bore steel water Tubes, 'medium grade'galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed .

Supply and fixing of 25 mm bore steel water Tubes, 'medium grade'galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing unserviceable pipes with smooth finished and make embosed on pipe complete all as specified and directed .

Dismantling / Taking down unserviceable Gun metal globe/gate valve and supply and fix new Gun metal globe / gate valve, screwed down high pressure with iron wheel head, screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc complete for following sizes all as specified and ass directed by the Engineer-in-Charge.

50 mm bore size

25 mm bore size

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.

ABP CONSTRUCTION (BID ID -3500424)