08/EE/PCM-DKP/TN/2023-24

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 15.2.2).

Dismantling cement concrete or brick or granolithic floor etc. including disposal of dismantled material as directed by E/I within a distance of 60 m. Including supply of all material, labour and T&P etc. required for proper completion of the work. (PSI 697)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sq. metres and below. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 15.12.1).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area beyond 3 sq. metres. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 15.12.2).

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 15.56).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.-15.3)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 15.7.4).

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 2.6.1 ).

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G. S. Sheet. (As per CPWD DSR 2021, Code No.- 15.28.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 4.1.8).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 4.1.3).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 11.3.1).

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 11.13.1).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - in all works as per direction of Engineer-in-charge: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 5.1.2)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 5.22.1)

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform, slab, shelves (Cast in situ) etc., as per direction of Engineer in charge. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 5.9.4)

Centring and shuttering including strutting,ropping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers, Columns, Pillars, Posts etc. as per direction of Engineer in charge. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 5.9.5)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). (As per CPWD DSR 2021, Code No.- 6.1.1)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 6.4.1)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). (1 cement :4 coarse sand). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 6.13.2)

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.4.1)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.-13.16.1)

Supply and fixing welded mesh Jali of 50x50mm or 25x25mm and 10 gauge including cost of all material, labour and T&P etc. complete required for proper completion of the work. (NSI)

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 10.29.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.21.2)

S/Replacement of the following types of oxidised mild steel iron fitting of approved quality

a) Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work.(As per CPWD DSR 2021, Code No.- 9.62.1)

b) Providing and fixing ISI marked oxidised M.S.tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.63.3)

c) Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete: 100x58x1.90 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.57.2)

d) Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. complete: 100 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.66.2)

e) Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.59.1)

f) Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete: 150 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.60.1)

Attending minor type of repair for full day by engaging and supplying one suitable plumber / Painter 1st class / Mason 2nd class for carrying simple type of repairing of all work including all T & P etc. required for proper completion of the work as per direction of Engineer in charge but excluding cost of material (NSI).

Attending minor type of repair for full day by engaging and supplying one suitable Helper / Mali / Beldar / Mazdoor / Labour / Sweeper for carrying simple type of repairing of all work including all T & P etc. required for proper completion of the work as per direction of Engineer in charge but excluding cost of material (NSI).

Removal of debris / waste material / any other material / waste material by sides of drains / rubbish on road side / park / dust bin and from any other location by full load tractor trolley (Tractor with trolley, driver, fuel etc.) within the specified colonies as desired by the Engineer-in- charge & includes safe disposal of the same out side the colony area at suitable dumping area including cost of all labour (minimum four nos labour or more as required) T& P etc required for proper loading/unloading and disposal of waste or any other material etc. required for the proper completion of the work in all respect as per direction of Engineer-in-charge (NSI).

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.42.1)

Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr.of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. One or more coats on old work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.108.1)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.46.1)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm) on existing cement paint surface. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.111.2)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.61.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.99.1)

Re-lettering with black Japan paint of approved brand and manufacture. (As per CPWD DSR 2021, Code No.- 13.105)

Providing and fixing trap of self cleansing design with screwed down or hinged 100 mm inlet and 100 mm outlet. Sand Cast Iron S&S as per IS: 1729. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.60.1.2)

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.13.2)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings, accessories and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.2.1)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.3.1)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.18.1)

Providing and fixing white vitreous china wash basin including making all Flat back wash basin of size 550x400mm. Including supply of all materia, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.25.2)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board. 610x460 mm bowl depth 200 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.10.2.2)

Supply and fixing CP wast jali for steel sink/wash basin of approved quality complete. Including supply of all material labour T&P etc. required for proper completion of the work. (NSI-2)

PVC/CI 100 mm dia Jali of approved quality complete. (NSI-4)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible Pipe 32mm dia. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.28.2.1)

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.21.2.1)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.18.1)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.48)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.31)

Providing and fixing brass bib cock of approved quality : 15 mmnominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.15.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.49.1)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards. 15 mm nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.50.1)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards. 15 mm nominal bore Including supply of all material labour T&P etc. required for proper completion of the work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.51.1)

Providing and fixing brass stop cock of approved quality : 15 mmnominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.16.1)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.52.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore . Including supply of all material labour T&P etc. required for proper completion of the work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.53.1)

S/F 15 mm dia CP brass pillar cock of approved quality with all labour, material & T&P etc. complete. (NSI-1)

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.64)

Providing and fixing 12 mm (1/2") dia. PVC connection pipe 330mm with brass union including supply of all mterial, labour and T&P etc.required for proper completion of the work. PSI-228 b.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall. 15 mm dia. nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.10.1)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.12.1)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.12.2)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 25 mm dia. nominal bore. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.12.3)

Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material, labour and T&P etc. required for proper completion of work. (NSI)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.1.2)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer, Using flats 30x6mm for diagonal braces and central cross piece. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 10.5.2)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 10.2)

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. Including supply and fixing necessary screws nails and all material, labour and T&P etc. required for proper completion of work. (As per CPWD DSR 2021, Code No.- 9.51.1)

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete.(Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbedwire used. With G.I. barbed wire. Including supply and fixing necessary screws nails and all material, labour and T&P etc. required for proper completion of work. (As per CPWD DSR 2021, Code No.- 16.18.1)

Same as above item but excluding cost of barbed wire. PSI-513

Extra for providing and mixing water proofing material in cement concrete or plaster work in doses by weight of cement as per manufacturer's specification. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 4.12)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.27.2.1.1)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood. 50x12 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.40.1.1)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 14.5.1)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.41.1)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.41.2)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories like Bend, Tee etc. for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as per direction of Engineer - in - charge. 75 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.42.5.1)

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories like Bend, Tee etc. for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as per direction of Engineer - in - charge. 110 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.42.5.2)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 8.31)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown etc., laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm, including pointing the joints with white cement and matching pigment etc. complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 11.37)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 8.2.2.2)

Providing and fixing 100 mm sand cast Iron grating for gully trap. (As per CPWD DSR 2021, Code No.- 17.29)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m². Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.1.3)

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m². Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.4.2)

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main. 15 mm nominal bore. (As per CPWD DSR 2021, Code No.- 18.20.1)

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main. 20 mm nominal bore. (As per CPWD DSR 2021, Code No.- 18.20.2)

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main. 25 mm nominal bore. (As per CPWD DSR 2021, Code No.- 18.20.3)

Renewal of old putty of glass panes(length). Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 14.9)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.91)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.20.1)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type)including supply of all material, labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.47.1)

Providing and fixing brass towel rail 600 mm long & 20 mm dia complete with C.P brass brackets fixed to wooden cleat with C.P brass screw including brackets brass towel rail together with a pair of C.P bracket to get the size of towel rail fix on the wall including supply of all materials etc required for proper completion of work and cutting and making good the wall plaster etc complete. PSI-335

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 17.73.2)

Providing and fixing Soap dish cromium plated with brackets fixed to wooden cleat with brass screws. PSI-336

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Including supply of all material labour T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 18.65)

Providing and laying of aggregate (singlesize) of 10mm, 20mm and 40mm nominal sizes at site(As per direction of Engineer-in-charge). Including supply of all material labour T&P etc. required for proper completion of the work. PWD-(PM0015+PM0016+PM0017) (NSI)

Brick edging laid lengthwise with half brick depthincluding excavation, refilling and disposal of surplus earth lead upto50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 16.8.1)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.101.2)

Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6 mm thick cement board. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 12.26.1)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.80)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 9.84)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 11.41.2)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, using 5kg. adhesive per sqm of tile area, in average 3mm thickness. Size of Tile 600x600 mm. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 11.41.2 - (Code No.- 11.42) + (Code No.- 11.43)

Providing and applying 1.2mm thick EPDM (Ethyle Pethyle Desmodor Monomor) water proofing membrane along with surface preparation by mechanical grinder over construction joint/ expansion joint along with applying Ist coat of primer followed by one coat of adhesive for EPDM on the surface and rubber membrane including supply of all material, labour and T&P etc. required for proper completion of the work, also including treatment to expansion/construction joints. (PWD SOR-2014, Code No.- 83329 1-26-5)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: 3 mm thick. (As per CPWD DSR 2021, Code No.- 14.90.1

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Including supply of all material, labour and T&P etc. required for proper completion of the work. (As per CPWD DSR 2021, Code No.- 13.63.1)

First class brick work in 1:4 with old dismantled bricks with cement and coarse sand of 2.5 FM mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. Including supply of all material labour T&P etc. required for proper completion of the work. (NSI) ( including cost of cement )

Providing and fixing Aluminium Composite Panel for aluminium door and window with screws etc. complete. (Frames, backing or studding to be paid seperately)

M/s Navneet Kumar

YASHU CONSTRUCTION

m/s ajanta art service

M/S HIMALAYAN CONSTRUCTION AND ENG

Y K Jain Company