General Electrification of work NABARD RIDF XXVI- TissueCulture Lab at Regional Agricultural Research Centre (RARS), Ambalavayal, Wayanad District. -SITC of 160 KVA Unitised Outdoor Substation, Fire Fighting System, UPS and AirConditioning System

Amount

Appendix 1: Electrification

1.10.3: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

OD87096/2024-2025: Wiring combined plug point together with the light point/ fan point/ exhaust fan point/ call bell point including 6 A 5 pin modular socket controlled by 6A one way modular switch in the existing switch board and giving connection to the phase,neutral and earth terminal with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable ( Green wire for earthing) etc as required

90.3.19.3: Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.15.4.2: Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.3.18.2 : Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamp

1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD38009/2025-2026 : Supply and installing B22 type 9W, LED BULB of 100 lumen/watt with PF&0.95

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD87128/2024-2025: Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

90.4.8: Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD87112/2024-2025 Supply, Conveyance, installation, testing and commissioning of 300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C and giving connections etc. as required

OD87118/2024-2025: Supply, conveyance, installation , testing and commissioning of 305 mm sweep, 1400 rpm Heavy Duty Exhaust fan working on 230 V A/C in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.

OD87107/2024-2025: Supply conveyance, installation, testing and commissioning the 17 W LED Mirror light fittings directly fixed on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required (Philips Ultron 17-Watt Wall Light (Cool White, Round, Metal) or its equivalent make)

OD87088/2024-2025: SITC of Bulk head fittings Pressure die cast housing IP 65 Protection against dust and water on wall including cutting necessary holes, giving connections with the extended original wiring , making good the damages ,Colour washing etc. as required. Philips make VISTA GLOW model no. WT140W LED 7S CW PSUSPC or its equivalent.

OD87133/2024-2025: Supply, Conveyance, installation, testing and commissioning of surface/recess mounting down light fittings of following type directly on ceiling including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc. as required. (Philips make 250CLED 12S- 6500PSUWH round Light or equivalent)

1.27.1: Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module(75mmX75mm)

1.27.2: Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.5: Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.24.1: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3: Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.26: Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Blanking plate

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

1.17.3: Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X1.5 sq.mm

1.17.6: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x1.5 sq. mm

1.17.11: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.13: Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm

1.17.15: Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x2.5 sq. mm)

1.17.20: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2x4 sq. mm

1.17.31: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 4x6 sq. mm

90.6.4.54: Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run

90.6.6.5: Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

90.6.5.11: Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.16.1.1: Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2: Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3: Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.4: Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.1: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.2: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.16.5.4: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

90.12.7.27: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages ,colour washing etc. as required.3.5 core 25 sq mm with factory made clamp

90.12.7.28: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

90.12.7.29: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp

90.12.7.30: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages ,colour washing etc. as required.3.5 core 70 sq mm

90.12.7.31: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm

90.12.7.34: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages ,colour washing etc. as required.3.5 core 185 sq mm

9.1.20: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.3 1/2X25 sq.mm (28mm)

9.1.21: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm

9.1.22: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)

9.1.23: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.24: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

9.1.27: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

90.12.10.5: Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation90/75 mm or nearest size

9 90.16.2.2: Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.20 mm dia. G.I pipe ( medium class)

2.3.4: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)16 way, Double door

90.11.1.10: Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages,colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.11: Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)

90.11.1.12: Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+24) - three phase double cover (IP 42/43)

90.11.1.15: Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.10.1: Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.10.4: Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

2.11: Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required..

2.12.1: Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40amps

2.13.2: Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.13.3: Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100amps

2.14.1: Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.2: Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.15.3: Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

90.9.2.1: Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

90.9.2.3: Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree

90.9.2.5: Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree

90.9.2.8: Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

2.21: Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

12.1: Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

12.11: Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

12.16: Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc.as required .

12.30: Supplying and erection of 30 A aerial fuse complete as required.

11.1.1: Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 4.5 metre and upto 6.5 metre

11.1.2: Above 6.5 metre and upto 8.0 metre 6.5 metre and upto 8.0 metre

OD87124/2024-2025: supply and providing 9KV 5 KA Lightning Arrestor in position and giving connections etc. as required.

90.14.1.2: Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powdercoated (excluding base frame)

90.14.2.1: Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1: Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4: Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5: Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6: Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7: Supply and providing copper earth bus in the panel board

OD87114/2024-2025 : Supply and providing plate earthing with 1200x1200x12mm GI earth plate,50 mm GI(medium class) watering pipe,GI funnel with weld mesh,25x5 mm GI clamps, CI/MS cover plate with locking arrangements, charcoal/coke and salt etc. including providing brick work masonry enclosure at the top (450x450x450mm inside) etc. as required.

5.4: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.3.9: Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.4.8: Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages,colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

OD87093/2024-2025: Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

90.16.3.10: Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm copper strip

OD87105/2024-2025: Providing and fixing testing joint, made of 25 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

90.14.24.68: Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty,Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.71: Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

90.14.24.73: Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.15 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.

OD87095/2024-2025: Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 11 - 15 KVAR & with 1 NO auxiliary contact in the existing panel assembly as required.

OD87103/2024-2025: Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 7.5 - 10 KVAR & with 1 NO auxiliary contact in the existing panel assembly as required.

OD87100/2024-2025: Supply and fixing 3 pole, capacitor duty contactor with AC coil for switching capacitor banks of rating 4 - 7 KVAR & with 1 NO auxiliary contact in the existing panel assembly as required.

OD87102/2024-2025: Supply and providing 8 stage 440/110V 5/1A Intelligent power factor controller in the existing panel board and giving connection

OD87082/2024-2025: Supply and providing Panel mounting fresh Air Fan 150 mm as required

OD87108/2024-2025: Flush head Push Button with 1 NC Block

OD87098/2024-2025: Flush head Push Button with 1 NO Block.

OD87113/2024-2025 : Supply and Fixing of Illuminated Flush head Actuator - Green with legend 'ON', (Contact - 1 NO) and giving connection as required.

OD87127/2024-2025: Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required. 315A 4 pole on load change over switch.

OD87131/2024-2025: Supply and providing Sub Main Distribution Board with IP42 protection complying to IEC 61439-2 with copper bus bar neutral link earth bus etc. suitable for providing 3pole MCCB's as incoming and outgoing fixed on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc.as required. MCCB Load Bank L&T Energy's or equivalent 250A 4 way

OD87116/2024-2025: Supply and providing Sub Main Distribution Board with IP42 protection complying to IEC 61439-2 with copper bus bar neutral link earth bus etc. suitable for providing 3 pole MCCB's as incoming and outgoing fixed on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc. as required. MCCB Load Bank L&T Energy's or equivalent 250A 8 way

OD87115/2024-2025: Supply and providing Mounting Base for the existing(250A bus,-4 way Sub Main Distribution Board with IP42 protection complying to IEC 61439-2,Fixing on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc. L&T make (category No.CM90437OOOO) or equivalent.

OD87129/2024-2025: Supply and providing Side cabling box (Right side/Left side ) for the existing(250A bus,-4 way Sub Main Distribution Board with IP42 protection complying to IEC 61439-2,Fixing on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc. L&T make (category No.CM90437OOOO) or equivalent.

OD87126/2024-2025: Supply and providing Bottom cabling box for the existing(250A bus,-4 way Sub Main Distribution Board with IP42 protection complying to IEC 61439-2,Fixing on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc. L&T make (category No.CM90437OOOO) or equivalent

OD87122/2024-2025: Supply and providing Corner box for the existing(250A bus,-4 way Sub Main Distribution Board with IP42 protection complying to IEC 61439-2,Fixing on wall using necessary anchor bolts including cutting hole on the wall , making good the damages, colour washing etc. L&T make or equivalent.

90.14.10.2: Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

90.14.10.3: Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

90.14.10.12: Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 -100% having adjustable OL & SC

90.14.10.17: Supply, conveyance and fixing the following types & current rated control gears & switch gears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.320A/400A, 50/55 kA (Ics=100%Icu), 4 pole,current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

OD87119/2024-2025: Supply and Fixing of Spreader Terminals for 4 pole MCCB in the existing panel board and giving connections etc. as required, upto 100A (1 set 4 numbers)

OD87120/2024-2025: Supply and Fixing of Spreader Terminals for 4 pole MCCB in the existing panel board and giving connections etc. as required. 160A (1 set 4 numbers)

OD87125/2024-2025: Supply and Fixing of Spreader Terminals for 4 pole MCCB in the existing panel board and giving connections etc. as required. 315A (1 set 4 numbers)

90.14.11.13: MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

90.14.11.15: MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

90.14.11.6: MCCB AccessoriesSupply and fixing 250 - 400A earth fault module of MCCB with builtin CBCT.

OD87092/2024-2025: Supply and providing Red, Green, Black, Yellow, Orange colours LED indicators, AC/DC 22.5mm cut out dia

OD87081/2024-2025: Supply and providing Blue Colour LED indicator lamp, AC/DC, 22.5 cm cut out dia

OD87109/2024-2025: Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete

OD87130/2024-2025: Supply and fixing of Three Phase Voltmeter accuracy class 1 in the existing enclosure and giving connections etc as required.

OD87123/2024-2025: Supply and fixing of Three Phase Ammeter accuracy class 1 in the existing enclosure and giving connections etc as required.

OD87117/2024-2025: Supply and fixing of 500/5 A, 15 VA, accuracy class 0.5, Tape wound Metering CT in the existing panel and giving connection as required.

OD87091/2024-2025: Supply and fixing 20 A bake lite type HRC fuse base with link in existing metal box and giving connections etc.as required.

OD87101/2024-2025: Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/equipment's including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.- 1.5 sq mm single run with required sockets

OD87099/2024-2025: Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 3.5 x 25 sq mm to 3.5 x 95 sq mm with 20 mm wide x 1.20 mm thick clip

OD87094/2024-2025: Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required. 3.5 x 185 sqmm with 25 mm wide x 1.20 mm thick clip

OD87090/2024-2025: Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 6 mm brass bolt & nut

OD87083/2024-2025: Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.25 x 3mm brass bolt & nut

OD87085/2024-2025: Supply and providing MS Chequered plates of suitable thickness including cutting, welding, painting etc. as required.

OD87111/2024-2025: Supply and installation of Enameled Danger Notice Board of size 200 x 150 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

OD87089/2024-2025: Supply and providing 2.5mm thick Elastomeric fire retardant insulating mat as per IS 15652/2006 to withstand-11 KV dielectric strength.

OD87087/2024-2025: Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.

OD87104/2024-2025: Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height

OD87106/2024-2025: Preparation of the Drawing and Schematic diagram and obtain the Application form from the Electrical Inspectorate /KSEB the actual amount may be returned on produce of original Receipts.

OD87097/2024-2025: Charges for preparation of Electrical Schematic per A3 sheet first copy

OD87110/2024-2025: Copying charges for additional copies per A3 sheet

Appendix 2: 160 KVA Unitised Outdoor Substation

OD87153/2024-2025: Supply, installation, testing and commissioning of outdoor HT metering cubicle consists of the following; A) Resin cast CT 3 Nos., ratio; - /5 or -/ 1 A, 10VA Class 0.2S B) Resin cast PT 1No., 11kV/110V, 25VA, Class 0.2S C) Test terminal block for TOD meter D)3 Phase, 4 wire, 110 V (L-L), -/1 A CT or -/5A CT, accuracy class 0.2, TOD meter as per KSEB Standards E) The enclosure shall fabricated using 2 mm MS sheet and shall comply with IP 65 standards with dust and vermin proof outdoor type and shall be powder coated after seven tank processing and phosphatising. 11 KV bus bar arrangement with insulator, HT cable termination, Locking facility etc as required.

OD87154/2024-2025 : supply and providing 11KV DO Fuse in position and giving connections etc. as required.

OD87151/2024-2025: supply and fixing 11KV 200A AB Switch in position and giving connection etc. as required

OD87155/2024-2025: Supply and fixing of 2.00 mm thick, 3.3 kV, Synthetic elastomeric fire retardant insulating sheet on the floor with using synthetic a 2.00 mm thick, 3.3 kV,Synthetic adhesive as required.

Appendix 3: Electrical Fire Fighting Work

OD87073/2024-2025: BOOSTER PUMP :-Supply, Installation, Testing and Commissioning of Booster Pump with AC driven TEFC motor, mono block, rated for 450 LPM at 35 M head 3 phase 7.5 HP complete with all accessories in position and giving connections etc. as required. (Make : LUBI)

90.14.28.2: S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor

OD87076/2024-2025: PRESSURE GAUGE:• Supply, Installation, Testing and Commissioning ofmPressure Gauge in position etc as required. 100 mm dia

OD87079/2024-2025: Providing & fixing of pressure switch in M.S. pipe line including connection etc.as required

OD87067/2024-2025: Providing, laying, testing & commissioning of 'B' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees,flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

OD87074/2024-2025: HOSE REEL (IMPORTED ISI MARKED):- Supply, Installation Testing & Commissioning of swing type hose reel confirming to IS : 884/1985 drum made of MS sheet to keep 19 MM dia 30 M long rubber hose pipe with PVC nozzle on one end and all other necessary fixing materials in position etc as required.

OD87064/2024-2025: Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 100 mm dia.

OD87065/2024-2025: BALL VALVE : Supply, Installation, Testing and Commissioning of Ball valve in position etc as required. 20mm dia

OD87066/2024-2025: NON RETURN VALVE:- Supply Installation, Testing and Commissioning of Non return valve of following sizes without bye pass arrangements swing check type with Cast iron body and flanges drilled to IS : 1538. in position etc as required. 100MM dia.

OD87068/2024-2025: AIR RELEASE VALVE:- Supply Installation Testing and Commissioning of Air release valve 15 mm gun metal in position etc as required.

OD87070/2024-2025: FIRE BRIGADE INLET 2 WAY: Supply Installation, Testing and Commissioning of fire brigade connection comprising of 2 Stainless steel inlets in position etc as required.

OD87075/2024-2025: FIRE EXTINGUISHER:- Supply and Installation of ABC Stored Pressure Type Fire Extinguisher of 4 Kgs capacity complete with initial charges and installation brackets in position etc. as required.

OD87062/2024-2025: MODULAR FIRE EXTINGUISHER:- Supply and Installation of ABC Modular Type Fire Extinguisher of 5 Kgs capacity complete with initial charges and installation brackets in position as required.

OD87077/2024-2025: FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing & commissioning of of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required.

OD87063/2024-2025: FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing & commissioning fire alarm sounder (HOOTER) with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate& suitable for operation with amplifier i/c line matching transformer etc.complete as required

OD87071/2024-2025: FIRE ALARM PANEL :- Supply, Installation of Microprocessor based main control panel of 4 Zone, including battery charging system, with all attachment for the alarm system with auto alert facilities and made MS sheet floor/wall mounting with locking arrangements duly painted as per the fire standard requirement.

OD87078/2024-2025: Supply and providing Glow Sign boards of 3mm PVC foam board size not less than 12" x 4" as required.

OD87069/2024-2025: Supplying and installing in position LED "EXIT" sign boards with battery backup. (size 30cm x 15cm)

OD87072/2024-2025: INVERTER:- Supply, Conveyance and installation of INVERTER 900 VA with 88 AH Exide Battery including testing and commissioning etc. as required.( For emergency lighting is independently connected and operated one switch.)

OD87080/2024-2025: Supply, Conveyance, installation, testing and commissioning of 3W Super Bright LED light fittings of following type Including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc. as required. (Philips/Wipro/Crompton or equivalent)

1.21.1: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.17.2: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

Appendix 4: Electrical AC Work

OD87145/2024-2025: supply conveyance installation testing and commissioning of 11TR AHU With air conditioning system with the following characteristics 1.Mixing box section with FAD and RAD 2.Filter section with pre filter (box type) 3. coil section with 6RDDX Coil with 2 circuits 4.space provision for 4kw strip heater and its cost along with its mounting arrangement is considered. 5.Fan section with direct driven type Back ward curved plug fans with IE--2 motor 6.Filter section with Fine Filter (flange type) 7.Outlet section with connecting flange Air Handling Unit 11 TR Double skin AHU complete with mixing box with percolated galvanised steel pre filter section , cooling coil fan .fine filters, volume control dampers for supply Return fresh air ,fresh air filter 1250pa static with 10 micron pre filters chiller coils (6 row cooling coil ) blower motor assembly etc. Thermal break construction with PUF filled panel for energy saving drive motor 5HP minimum static pressure of 125 mm Accessories 5 micron fine filter A/C condensing unit Dx type 11TR with control unit refrigerant piping and R407/R410 charging with two compressor.

OD87138/2024-2025: Supply Installation and Commissioning of 5.5TR Ductable AC unit Fitted with reciprocating compressor, copper condenser operating on 415V Three phase AC supply, R410A/R32/R22 non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc. Air flow 2400 CFM of the following capacity, microprocessor control with cordless remote control etc. complete with accessories in floor stand/wall bracket including all connections etc. as required.

OD87134/2024-2025: Supply, installation, testing and commissioning of wall mounting type split air conditioner unit conforming to IS, fitted with rotary compressor operating on 230V single phase AC supply, R410A / R32 non CFC refrigerant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc of following capacity, microprocessor control with cordless remote control etc 1.0 TR and minimum ISEER rating of 3.5 single phase Inverter type split AC unit with comprehensive maintenance contract up to the end of 36 months from date of commissioning including periodical services, gas topping etc. complete (make:Bluestar/Carrier/Mitsubishi/Hittachi/LG/Daikin/Thoshiba)

OD87142/2024-2025: Supply conveyance and installation of 1m size AIR CURTAIN of high velocity 1400 rpm single phase .Air through in 2m

OD87140/2024-2025: Supply and fixing of 25mm (10kg/sq.cm) PVC drain pipe along with all required accessories in surface/ recess including cutting the wall and making good the damages etc. as required.

OD87135/2024-2025: Supplying fixing testing commissioning of extruded Aluminium powder coated supply and return air grills etc.as required.

OD87147/2024-2025: Supply fabrication installation and testing of flexible canvas connection with indoor and duct. The size of canvas is 4"/6" made out of fire resistant flexible canvas sheet etc. as required

OD87146/2024-2025: Supply installation balancing and commissioning of GSS ducting with neoprene rubber gaskets elbow splitters dampers vanes hangers supports etc.as per approved drawings as instructed at the site and keep the relevant standards of the sheet. Is 24 GAUGE etc. as requiredse

OD87137/2024-2025: Supply installation balancing and commissioning of GSS ducting with neoprene rubber gaskets elbow splitters dampers vanes hangers supports etc.as per approved drawings as instructed at the site and keep the relevant standards of the sheet. Is 22 GAUGE etc. as required

OD87141/2024-2025: Supply and installation of Pressure control corner dampers are provided at four corner locations to adjust the pressure within OR to desired NABH stipulated standard etc. as required.

OD87144/2024-2025: Supply and installation of plenum LAMINAR FLOW plenum box ceiling mounted system with unidirectional air flow holding structure confirming to DIN 4799 STANDARDS for the air distribution system complete with 11 nos. HEPA FILTERS (DS efficiency 99.97%down to 0.3m) Diffusers are made of Aluminium punched /perforated sheet for unidirectional diffusion air and provision etc. as required

OD87139/2024-2025: Supply installation testing and commissioning of thermal duct lining using 10 MM thick nitrile rubber insulation and giving connections etc.as required.

OD87143/2024-2025: Supply and fixing Aluminium (22 gauge)with curves & bends where indicated for easy flow of air tight by applying silicon sealant after fabrication .hangers will be provided to ducts & will be suspended by means of GI coated rod &these will not be more than 2.5 mts. Apart .Thermal insulation with 9mmXPE with Aluminium foil for supply & return air ducts. Joints will be lapped with nitrile tape for better insulation.(Laminar to AHU &return air in all four corners

OD87148/2024-2025: Supply and installation of out door stand for 5.5/11 TR Air conditioning unit.

OD87136/2024-2025: SITC of Hard drawn copper refrigerant piping including all accessories including joints properly brazed insulated with chemically cross linked Nitrile rubber fire retardant grade Class O with necessary supports as required of size 19 mm as required

90.6.5.20: Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

Appendix 5: SITC of UPS

OD87149/2024-2025: Supply and installation of 30 KVA /30 KW UPS 3 phase in and out with 12V 100AH 36 Nos. battery with 1 hour back up with stand in stand alone configuration with indoor IP 20 SURGE Protection system PF.99 THD 5% WITH OUT Use of any external filters double conversion technology with input voltage 380/400/415 50Hz 3 phase ,It shall be 100% generator compatible with efficiency 96.5% and including all accessories etc.as required. relevant IS standards conversion DSP based UPS system and UPS shall be with automatic bypass built in.The system shall have IGBT RECTIFIER and Inverter.

ANOOP KUMAR P (BID ID -2372237)

Bidder Name

SOUBHAGYA ENGINEERING COMPANY

ANOOP KUMAR P