GENERAL-RENNOVATION OF NATTAKAM GUEST HOUSE-TOURISM DEPARTMENT-KIIDC-IMPROVEMENT OF KOTTAYAM GOVT GUEST HOUSE HERITAGE BLOCK AT NATTAKAM General Civil Work

Amount

Main Building

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

OD4349/2025-2026:Dismantling teak wood flooring including stacking of serviceable materials and disposal of unserviceable materials etc complete as per the direction of engineer in charge

15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

OD4344/2025-2026:Dismantling ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

OD27349/2024-2025:Dismantling and clearing damaged AC sheet roofing and erecting new one including all labour charges etc complete.

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.3.1:20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)

OD5068/2025-2026:Applying Anti termite treatment on the flooring using second-generation chemicals which is ecofriendly and nil harmful of human beings and pet animals which control the pests including all cost and labour charges etc complete

11.33.1:25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class teak wood

OD4365/2025-2026:Supply and installation of teak Timber wooden flooring using departmental 18mm thick wood planks in flooring, planks to be fixed on plywood base using suitable adhesive and nails. Including cost and conveyance, labour charges etc complete.

14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD4556/2025-2026: Supplying and fixing Reuse wood work in frames ,purlins and rafters etc. complete at all levels including all materials and labour charges etc complete as directed by the Engineer in Charge.

OD17357/2024-2025:Supplying and fixing G I Mesh and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

OD5071/2025-2026: Supplying and fixing of traditional brass latch and lock

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

12.59.1:Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process.

9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

22.5:Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

11.46.2:Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

9.90.2:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm

OD4608/2025-2026: Supplying and fixingRain water gutter ALUMINIUM POWDER COATED including all materials and labour charges etc complete

OD17367/2024-2025:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

OD17362/2024-2025:Applying aquacoat PU Glossy Clear wood or equalent work with two coats after preparing base rubbing and cleaning emery paper, filling holes and finishing the surface with ceiler including all cost and labour charges etc. complete

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

OD17141/2025-2026:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coat etc complete

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

8.2.2.2:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

OD12208/2025-2026:Supplying and fixing vox fronto materilal for vox soffit decoration work and wall decoration including conveyance , labour etc complete as directed by the departmental officers at site.

OD17371/2024-2025:Supplying and laying Coble stone in landscape area of 150mm thick including all cost of materials, labour etc. complete as per the direction of Engineer in Charge.

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

OD4551/2025-2026:LATERITE SLICED CLADING - Special type of coloured exposed laterite cladding using lateriter or equivalent gum for superstructure wall including all cost of material and labour charges etc comp[lete (aproved OD in THP Padiyoor)

50.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.

9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

12.7.1:Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2

50.12.2.1:Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.

12.1.1:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

OD14146/2025-2026: Providing and fixing superior quality white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid JAQUAR LYS WHT-38851S300UFSM or Equivalent approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

17.78:Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.22B:Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

30.2.1:Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

30.2.3:Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

OD26627/2024-2025:Supply and installation of vertical PVC micro sprinkler head

OD26647/2024-2025:Supplying and planting peanut plants including all costs of manure, soil, labour and maintaining , watering the plant etc. till it is handed over.

OD26654/2024-2025:Supplying and planting uginiya including all costs of manure, soil, labour and maintaining , watering the plant etc. till it is handed over.

OD26908/2024-2025:Supplying and planting lantana plants plants including all costs of manure, soil, labour and maintaining , watering the plant etc. till it is handed over.

OD26919/2024-2025:Supplying and planting melastoma plants including all costs of manure, soil, labour and maintaining , watering the plant etc. till it is handed over.

OD26921/2024-2025:Supplying and planting pearl grass plants including all costs of manure, soil, labour and maintaining , watering the plant etc. till it is handed over.

OD27346/2024-2025:Supplying and laying Polyhouse roofing over already excising structure including all labour charges etc complete.

50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall

50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

CONSTRUCTION OF WATER TANK

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

50.18.9.8.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall

50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

OD26905/2024-2025:Supply, Installation, Testing and commissioning of Over head tank (Stainless Steel) having a capacity of 5000 litres with necessary Accessories (Nuts,Bolt and Support.etc) , Approved Make/Materials :- ISI Approved Materials.

MODULAR KITCHEN ITEMS

OD21805/2024-2025:Supplying and installing LPG pipe line with MS - C class pipe (5 + 5 main holding systems - total 10cyclenders), guage, on/off valves, shutt off valves for safety, connecting pipes for burners etc.(charges including one year warranty ) including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21807/2024-2025:Supplying ,providing and fitting stainless steel juice making table of size 1.80m × 0.60m × 0.85m with a sink of dimension 0.60m × 0.45m on top (sunken) and a bottom shelf at a distance of 0.45m from the table top, backsplash and all its fittings including conveyance and placing at a suitable location instructed by the engineer in charge

OD21808/2024-2025:Supplying, providing and fixing stainless steel coffee table of size 1.55m × 0.60m × 0.85m with a bottom shelf at a distance of 0.45m from the table top, and fixing a wall mountable wooden shelf of size 0.76m × 0.125m × 0.76m with backsplash and all its fittings including conveyance and placing at a suitable location instructed by the engineer in charge.

OD21809/2024-2025:Supplying , providing and fixing stainless steel bain maire counter of size 1.45m × 0.65m × 0.85m with 2 nos of 1/1 gn pan, 4 nos of 1/2 gn pan including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21810/2024-2025:Supplying , providing and fixing stainless steel three sink unit of size 1.65m × 0.60m × 0.85m having bottom cross support and over head plate rack, with backsplash and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21811/2024-2025:Supplying , providing and fixing stainless steel bulk cooking range of size 0.50m × 0.50m × 0.45m with<br>1 no. G10 burner and 1 no. T35 burner including all its conveyance and placing at a suitable location instructed by the engineer in charge

OD21813/2024-2025:Supplying ,providing and fixing stainless steel two burner cooking range of size 1.10m ×0.60m × 0.85m with 1 no. T35 burner including all its fittings,conveyance and placing at a suitable location instructed by the engineer in charge.

OD21814/2024-2025:Supplying ,providing and fixing stainless steel 304charcoal operated tandoor of size 0.75m × 0.75m × 0.80m including clay pot with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21815/2024-2025:Supplying, providing and fixing stainless steel work table of size 0.70m × 0.70m × 0.85m with bottom cross support with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21816/2024-2025:Supplying , providing and fixing stainless steel 5 tier rack of size 1.15m × 0.45m × 2.00m with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21817/2024-2025:Supplying ,providing two tier wooden service trolley with stainless steel frame of size 0.75m × 0.55m × 0.75m including caster wheels and all its fittings including all its conveyance .

OD21824/2024-2025:Supplying ,providing amd fixing box type hanging hood for Chineese/two burner and bulk cooking range of size 2.50m × 1.50m × 0.60m with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge

OD21826/2024-2025:Supplying and providing two tier stainless steel trolley of size 0.60m × 0.50m × 0.75m including caster wheels and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21827/2024-2025:Supplying , providing and fixing SS wall type clamping hood for tandoor of size 0.80m × 0.80m × 0.60 with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD21830/2024-2025:Supplying ,providing and fixing ss wall type hanging hood for hot plate/dosa plate of size 1.50m × 0.75m × 0.60m with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD5029/2025-2026: Supplying ,providing and fixing GI duct for fresh systems with 24 swg G.I sheet including hanging rods ,scaffolding charges,labour charges and all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

OD5034/2025-2026: Supplying ,providing and fixing GI Ducting for SS Hoods with 24 swg ,GI sheet including hanging rods, scaffolding charges and labour charges etc with all its fittings including all its conveyance and placing at a suitable location instructed by the engineer in charge.

ELECTRIFICATION

1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

OD23361/2024-2025:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, without modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc. Group C

1.11:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

OD23360/2024-2025:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, without 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

OD23351/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell Push

OD23352/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone Socket Outlet

OD23353/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet

OD23354/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. One way DP switch 32A (for AC) 32A DP switch

OD23355/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. One way switch 16A (for /Geyser/service)

OD23356/2024-2025:Supplying and fixing following Black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 16A socket (AC/Geyser/Service)

OD23357/2024-2025:Supplying and fixing following black finish switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Socket 6A

OD23358/2024-2025: Supplying and fixing following black finish type switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. One Way Switch 6A

OD23359/2024-2025:Supplying and fixing following DND switch on the existing modular plate & amp, switch box including connections but excluding modular plate etc. as required.

1.55.3:Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.3.1:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door

2.3.4:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door

90.11.1.16:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.11:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43)

OD23036/2024-2025:Supplying and fixing SITC of Rust Resistant and Weather-Proof Bulkhead light fixture with 9W LED lamp, IP 65 protection complete with all other accessories as required.

OD23039/2024-2025:Supply and fixing of 20W cool day light LED tube light, polycarbonate body Slimline Ultra LED Batten is its high efficiency, delivering over 100 lumen/watt

OD23100/2024-2025:Supply and fixing of 9 W LED bulb with angle batten holder

OD23102/2024-2025:Supplying and fixing 6W Mirror Light, Waterproof LED lighted mirror provides light much similar to natural light and aids in viewing yourself clearly.

OD23343/2024-2025:Supply and installation of Bed side lamp Easy to adjust• Gooseneck arm, Long life LED light source Premium material & finish, Energy saving.black colour body metal material, dimension 500x90x90mm LED lamp base 3 W lumen /cct 75lm/3000k

OD23347/2024-2025:Supply and fixing of 2W LED step light, Aluminium base and powder coated finish

OD23349/2024-2025:Supply and installation of 15W LED Recess mounted down Light Warm White ,Slim Design , Energy Efficient, Premium Downlight ,BIS Approved.

OD25844/2024-2025:Supply and fixing of 3 Watt COB Led Black body Wall Light For Focusing Wall Or Photo Frame, COB LED reflector with IP65 protection.

OD25873/2024-2025:Supplying and fixing 9W recess mount down light warm white light 220V and including its all fitting

OD25871/2024-2025:Supply and fixing 2 module linear deep recessed reflector cob down light 30W warm white linear light

OD23503/2024-2025:Supplying and fixing energy efficient 20W recess mounted down light white color powder coated finish 6000K 1800 Lumen cool white color light including its all fittings

OD23504/2024-2025:SITC of strip light. Dimensions: 5000x10x0.3 (5 mtr.), 120 LED/mtr, 28W with driver, Lumen: 3100lm for 5 mtr. Low glare light for your enhanced eye comfort Get enchanted with the beautiful ambience created by Linea Bright. The customisable LED tape comes with superior adhesive for ease of installation. High quality LED for bright and true shades of white, Flexible and customisable Superior adhesive for easy installation.

1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

OD25846/2024-2025:Conveyance, installation, testing and commissioning of exhaust fans of size 150mm fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.

OD23101/2024-2025:Supply, installation, testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.300/305mm light duty

OD23328/2024-2025:Conveyance, installation, testing and commissioning of exhaust fans of size of 450mm sweep in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan. 450 mm sweep heavy duty

OD23348/2024-2025:Supply installation testing and commissioning of 1400mm Stealth Wood Energy Saving Ceiling Fan with Energy Efficient Induction motor, Aerodynamic prolife blades for silent operation, Wide blades with high twist angles leading to high air delivery, 100% rust free reinforced ABS blades ,Dust and mark resistant coating,.

OD23350/2024-2025:Supplying and fixing black finish two modules stepped type electronic fan regulator on the existing plate and switch box including connections etc

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

OD23338/2024-2025:Supplying and fixing cast iron lamp pole of height 3mtrs. base dia.250mm and top dia.75mm (weight 110kg. Arox. with provision for fixing MCB and cably entry/exit at bottom made of FG15 grade cast iron with MRF apoxy black finish over a coat of zinc chromate base with foundation bolts and nuts

OD23367/2024-2025:Supplying and fixing cast iron post top lanterned 35W inbuild LED black colour powder coated finish (AL die sheet metal lamp shade) cool white colour

OD23344/2024-2025:SITC of Water Purifier with UV filtration 5Llitre. UV+UF with patented Active Copper Technology, Stainless Steel Tank, Convenient Features- Supreme Aesthetics, Smart LED Indication, Energy Saving Mode.

OD23345/2024-2025:Supplying and fixing 3 L, 3 kW, 2.4 kg instant water heater with plastic body, stainless steel tank with all accessories

OD23346/2024-2025:SITC of 2 ton 5star inverter split A/C with stabilizer and all accessories, giving connection as required.

OD25919/2024-2025:Supply and fixing 5 Hp three phase centrifugal monoblock pump, 858 LPM, class B insulation, cast iron, 60x65 mm pipe size, 28m maximum head range, IP 44, 415V, 50 Hz AC supply

OD23340/2024-2025:Supplying and fixing outdoor floor mounting feeder pillar panel made of Glass Reinforced Plastic (GRP). The Degree of Ingress Protection IP 66, impact protection shall be IK10. The feeder pillar shall be comprising of the following and shall be fully wired as per latest electrical standards with hot dipped MS canopy, MS mounting frame and all necessary accessories, ready to use(Make: Cape or equivalent)Feeder pillar Incomer: 25A 10kA C Curve DP MCB-1nos,25A 30mA DPRCCB-1nos, 24 hr timer+ auto manual switch +contactor - 1 no. Out goings: 6A 10kA SP MCB - 10 nos and all necessary accessories as required.

OD23341/2024-2025:Earthing with G.I. earth pipe 2.7 meter long, 40 mm diameter including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

OD23342/2024-2025:Supply & installation of dust and vermin proof, 3 Phase Meter Board (size 760x450x260x) and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required.

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.12.1.4:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 16 sq mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.1.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 6 sq mm

9.1.3:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

90.12.1.1:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 4 sq mm

90.12.1.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.12.1.41:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

OD26212/2024-2025:Charges for rewiring the DB, as per the site engineer's instructions, in case any maintenance is required.

ELV works

OD13522/2025-2026:Supply and Installation of 6-core Outdoor OS2 Multi-Tube Armoured Fiber Cable with color-coded fibers , thixotropic gel & petroleum jelly water blocking, polyester/water-swellable core wrapping, >0.125mm corrugated steel tape armor, dual 0.9mm steel strength members, polyester ripcord, UV-stabilized HDPE outer sheath (anti-rodent & anti-termite), min tensile strength 1500N, crush resistance 3000N/10cm, and operating temperature range -40°C to +70°C in the existing surface/recessed steel/DWC/PVC conduit as required. Make:- PANDUIT/COMMSCOPE/MOLEX/LEGRAND.

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD14009/2025-2026:Supply and installation of Pole Mount Camera clamp Bracket with 2 Nos. 100 MM SS Loops, for Outdoor use and compatible with 5x5 junction box.

OD14011/2025-2026:Supply and Commissioning of Aluminium cover for the bullet camera installed including all cost

OD14012/2025-2026:Supply and laying of CAT6 Armored 23AWG Copper Cable supporting up to 10Gbps speed, with HDPE insulation, inner PVC gray jacket, aluminium wire armoring, FR-PVC black outer jacket (0.85mm), and UL, ETL, RoHS, TIA/EIA-568-C.2 compliance. Make:Dlink/molex/Birla

OD14013/2025-2026:Supply, Installation, testing and commissioning of 1.25Gd SFP Module Single mode 1310 nm1000 Base LX/LC connector

OD14100/2025-2026:Supply, Installation, testing and commissioning of 4 MP IP Fix Lens Bullet camera, 1/2.8" CMOS, F2.0, Fixed Iris, 120dB WDR,50m IR,IH+265/H.265/H.264, 0.002Lux, 2592x1520@25fps, Built-in Mic, SD Card Support up to 512Gb, IP67, PoE,Support tripwire and perimeter,Polycarbonate plus Metal Housing. Make: Honeywell/Norden/Panasonic

OD14101/2025-2026:Supply and installation of Waterproof 5x5 pole mount CCTV Camera PVC Junction box, IP66 with glands for cable entry

OD14105/2025-2026:Supply and installation of DIN Rail Slotted Aluminum RoHS compliant 19" Inches Long 35mm Wide 7.5mm High with Hardware kit.

OD14106/2025-2026:Supply, Installation, testing and commissioning of PoE System 10KV Ethernet Surge Protector, Industrial Din Rail Gigabit Lightning Arrestor, PoE++ 120Wmax RJ45 Surge Protector, 1000Mbps Zinc Alloy -40 deg celisius to 85deg celisius, GDT Gas Discharge Tube for camera and rack with all accessories to complete the work.

1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

OD14109/2025-2026:Supply and installation of DIN Rail Slotted Aluminum RoHS compliant 4" Inches Long 35mm Wide 7.5mm High with Hardware kit.

OD14110/2025-2026:Supply of Cat 6 one Mtrs patch cord. Make:- Dlink/Molex/Equivalent

P N Gopalakrishnan (BID ID -2259285)

Bidder Name

LAL BEN

P N Gopalakrishnan