Repair to certain wooden furniture under GE Dehradun.

Amount

Repair/ Recushioning of Sofa Set 4 Seater.

Removing the existing unserviceable covers from detachable foam cushion from sofa set 04 seater and S&F new cover made out of approved best quality tapestry cloth (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE

Removing of old U/S cushion from seat of sofa set 04 seater and S&F new foam cushion 100mm thick and 40 density,Make- Kurlon/ Sleepwell duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE and as specified in drgs with new tapestry cloth not less than Rs. 550/-per meter of appropriate quality.

Removing of old U/S cushion from back of sofa set 04 seater and S&F new foam cushion 100mm thick and 40 density,Make- Kurlon/ Sleepwell duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE and as specified in drgs with new tapestry cloth not less than Rs. 550/-per meter of appropriate quality.

Removing the existing unserviceable shoes of legs from Sofa set 04 seater and S&F new hard PVC shoes of superior quality for legs of sofa set 04 seater with steel screws to match the original as shown on Drg and as directed.

Removing the existing unserviceable front / rear legs from Sofa set 04 seater and S&F new front / rear legs made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable Battens for seat / back from Sofa set 04 seater and S&F new Batten for seat / back made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable side back / front rails from Sofa set 04 seater and S&F new side back / front rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable front/ arms from Sofa set 04 seater and S&F new front/ arms made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of Sofa Set 04 Seater with high class finish ,complete all as specified & directed by Engineer-in-Charge.

Repair/ Recushioning of Sofa Set 5 Seater.

Removing the existing unserviceable covers from detachable foam cushion from sofa set 05 seater and S&F new cover made out of approved best quality tapestry cloth (locally available), not less than Rs. 550/-per meter) duly stitched as per size of seat & one side be stitched with zip chain of approved quality complete all as specified & shown on drgs & approved by GE

Removing of old U/S cushion from seat of sofa set 05 seater and S&F new foam cushion 100mm thick and 40 density,Make- Kurlon/ Sleepwell duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE and as specified in drgs with new tapestry cloth not less than Rs. 550/-per meter of appropriate quality.

Removing of old U/S cushion from back of sofa set 05 seater and S&F new foam cushion 100mm thick and 40 density,Make- Kurlon/ Sleepwell duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE and as specified in drgs with new tapestry cloth not less than Rs. 550/-per meter of appropriate quality.

Removing the existing unserviceable shoes of legs from Sofa set 05 seater and S&F new hard PVC shoes of superior quality for legs of sofa set 04 seater with steel screws to match the original as shown on Drg and as directed.

Removing the existing unserviceable front / rear legs from Sofa set 05 seater and S&F new front / rear legs made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable Battens for seat / back from Sofa set 05 seater and S&F new Batten for seat / back made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable side back / front rails from Sofa set 05 seater and S&F new side back / front rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable front/ arms from Sofa set 05 seater and S&F new front/ arms made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of Sofa Set 05 Seater with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIR TO TABLE BED SIDE

Removing U/S top / self and S&F new top/self of table bed side made up of 18/19mm thick prelaminated MDF board of exterior grade , complete all as specified in drgs and as directed.

Removing of old unsv sides of table bed side and S&F new sides of table bed side made out of 18/19mm prelaminated MDF board of exterior Grade , complete all as shown on drgs and as directed .

Removing of unserviceable ply wood back and S&F new back made out of 18mm thick prelaminated MDF board exterior grade , complete all as shown on drgs and as directed

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table bed side with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIR TO TABLE CENTRE:

Removing of old unserviceable existing top from table and S&F new top made out of 18/19 mm thick prelaminated MDF board exterior Grade duly edging all round the top with 04 mm teakwood beads, complete all as shown on drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg finished to match the existing surfaces of the item complete all as directed.

Removing the existing unserviceable long rail from Table centre and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in-charge

Removing the existing unserviceable Short Rails from Table centre and S&F new short rails, made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable Stiffners from Table centre and S&F new Stiffners made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in-charge

Removing the existing unserviceable shoes of legs from table centre and S&F new hard PVC shoes of superior quality for legs of table centre with steel screws to match the original as shown on Drg and as directed.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table centre with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO PEG TABLE :

Removing of old unserviceable existing top from table and S&F new top of size as per drg.made out of 18/19mm thick prelaminated MDF board exterior Grade duly edging all round the top with 05 mm teakwood beading complete all as shown on drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg to match the existing surfaces of the item complete all as specified.

Removing the existing unserviceable long rails from Table peg and S&F new long rails made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in-charge

Removing the existing unserviceable Short Rails from Table peg and S&F new short rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in-charge

Removing the existing unserviceable Stiffners from Table peg and S&F new Stiffners made out of Teak Wood duly finished match the original as shown on Drg and as directed by Engr-in-charge

Removing the existing unserviceable shoes of legs from table peg and S&F new hard PVC shoes of superior quality for legs of table peg with steel screws to match the original as shown on Drg and as directed.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table peg with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO TEAPOY WOODEN:

Removing of old unserviceable existing top from table and S&F new top of size as per drg.made out of 18/19mm thick prelaminated MDF board exterior grade duly edging all round the top with 05 mm teakwood beads complete all as shown on drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg complete to match the existing surfaces of the item complete all as specified..

Removing the existing unserviceable long rail from Teapoy wooden and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed.

Removing the existing unserviceable Short Rail from Teapoy wooden and S&F new short rail made out of Teak Wood duly finished complete to match the original as shown on Drg as directed.

Removing the existing unserviceable Stiffners from Teapoy wooden and S&F new Stiffners made out of Teak Wood duly finished to match the original as shown on Drg and as directed

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of teapoy wooden with high class finish ,complete all as specified & directed by Engineer-in-Charge.

Removing the existing unserviceable shoes of legs from teapoy wooden and S&F new hard PVC shoes of superior quality for legs of teapoy wooden with steel screws to match the original as shown on Drg and as directed.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

REPAIRS TO TABLE DRESSING LADIES

Removing of old unserviceable mirror from table dressing ladies and S&F new mirror 5 mm thick of existing size , duly fixed with frame as per drg complete all as specified.Make- Modiguard/Atul

Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV top and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV bottom and S&F new Bootom made out of 12 mm thick plywood complete all as specified in the drg and as directed by Engr in Charge.

Removing old worn out drawer from the table and S&F new drawer made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

Removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer complete all as specified in the drg and as directed by Engr in Charge.

Taking down old U/S cushion and S& F new cushion 32 density and 75 mm thick complete with upholstry ( not less than Rs 550 /- per RM) as per existing shape and size complete All as specified in drawing and as directed by Engr-in-Charge

Removing old worn out shutter the table and S&F new shutter made out of 18 mm thick perlaminated MDF board specified in the drg and as directed by Engr in Charge .

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dressing with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO TABLE DRESSING GENTS.

Taking down unserviceable broken mirror and S&F new mirror 5mm thick as per existing size, duly fixed with frame as per drg complete all as specified.Make-Modiguard/Atul.

Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV top from the mirror and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV bottom from the mirror and S&F new Bootom made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Removing old worn out drawer from the table and S&F new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .

Removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer complete all as specified in the drg and as directed by Engr in Charge.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dressing with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO BED HARD PLY TOP:

Removing of old top from bed and S&F New Plywood top of 12 mm thick, BWR grade, ISI Marked confirming to IS-303 Make : Greenply/Archidply/Century in one piece, fixed with suitable screws complete, all as specified and shown on drg and as directed.

Removing of long U/s rail and S&F for long Rail made out of teak wood complete all as per drg and as directed.

Removing of short U/s rail and S&F for short Rail made out of teak wood complete all as per drg and as directed.

Taking out all broken worn out component of head board and S&F frame of teak wood and Teak face ply one side and other side commercial ply BWR grade ISI Marked complete all as per drg.and as directed.

Taking out all broken worn out component of foot board and S&F frame of teak wood and Teak face ply one side and other side commercial ply BWR grade ISI Marked complete all as per drg.and as directed.

Taking out old U/S stiffener and S&F stiffener with new one made out 2nd class hard wood., complete all as per Drg aqnd as directed.

S &F in repair MS clamp made out mild steel flat iron size 35 mm x 5 mm including 2 coats of synthetic enemel paint over a coat of redoxide primer complete all as specified.

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of bed with high class finish ,complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO TABLE DINING 8 PERSONS:

Removing of old unserviceable existing top from table and S&F new top of size as per drgmade out of 18/19 mm mm thick prelaminated MDF board exterior grade duly edging all round the top with 05 mm teak wood beads complete all as per drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg duly finished to match the existing surfaces of the item complete all as specified..

Removing the existing unserviceable long rail from Table Dining 08 Pers and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed

Removing the existing unserviceable Short Rail from Table Dining 08Pers and S&F new short rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dining with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

REPAIRS TO TABLE DINING 6 PERSONS:

Removing of old unserviceable existing top from table and S&F new top of size as per drgmade out of 18/19 mm mm thick prelaminated MDF board exterior grade duly edging all round the top with 05 mm teak wood beads complete all as per drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood as per drg duly finished to match the existing surfaces of the item complete all as specified..

Removing the existing unserviceable long rail from Table Dining and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed

Removing the existing unserviceable Short Rail from Table Dining 08Pers and S&F new short rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dining with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

REPAIRS TO TABLE WRITING:

Removing of old unserviceable existing top from table and S&F new top of size as per drg. made out of 18/19mm thick exterior grade MDF board as approved by GE duly edging all round the top with 05 mm teak wood beads complete all as shown on drgs and as directed.

Removing of old unserviceable leg and S&F new leg made out of 2nd class hard Wood as per drg duly finished to match the existing surfaces of the item complete all as specified..

Removing the existing unserviceable long rail from Table and S&F new long rail made out of 2nd class hard Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable short rail from Table and S&F new short rail made out of 2nd class hard Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable Stiffners from Table and S&F new Stiffners made out of 2nd class hard Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing of old unservicable drawer from Table and S&F new drawer made out of 6mm thick plywood commercial BWR grade duly fixed with S/S knobs etc complete all as shown on drgs and as directed.

Removing old u/s back side board of store box and S&F new 6mm thick (BWR) grade commercial ply, complete all as specified.

Removing old u/s side board of store box and S&F new 18/19mm thick block board teak veneer finish (One side) , complete all as specified.

Removing U/S small legs from the table S&F new legs made out of 2nd class HW complete all as per specfication and directed by Engr in Charge.

Removing U/S shutter from the table and supply and fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete all as per shown in drg and directed by Engr in Charge.

Removing old/worn out rubber shoes and S & F new rubber shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dining with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

TABLE DINING 1200x900:

Removing of old unserviceable existing top and S&F new top of size as per drg made out of 18/19mm thick prelaminated MDF board exterior grade as approved by GE duly screwed edging all round the top with 05 mm thick teak wood beads duly finish to match the original,complete all as specified and as directed.

Removing of old unserviceable leg and S&F new leg made out of Teak Wood duly finish to match the original and as shown on drg complete all as specified and as directed. .

Removing of old unserviceable long rail and S&F new long rail made out of Teak Wood size & other details complete as shown on drawing duly finish to match the original complete all as specified and as directed. .

Removing of old unserviceable short rail and S&F new short rail made out of Teak Wood size & other details complete as shown on drawing duly finish to match the original complete all as specified and as directed. .

Removing the existing unserviceable Stiffners from Table 1200x900mm and S&F new Stiffners made out of Teak Wood duly finished to match the original as shown on Drg ,complete all as specified and as directed.

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table dining with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

REPAIRS TO TABLE 3'x2'( WITHOUT DRAWER)

Removing of old unserviceable existing top from Table and S&F new top of size as per drg.made out of 18/19mm thick prelaminated MDF board exterior grade as approved by GE duly edging all round the top with 05 mm teak wood beads complete all as specified and as directed.

Removing of old unserviceable legs from Table and S&F new leg made out of Teak Wood as per drg, duly finished to match the existing surfaces of the item complete all as specified.

Removing the existing unserviceable long rail from Table and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable Short Rail from Table and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable Stiffners from Table and S&F new Stiffners made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

REPAIRS TO TABLE 3'x2'( WITH DRAWER)

Removing of old unserviceable existing top from Table and S&F new top of size as per drg.made out of 18/19mm thick prelaminated MDF board exterior grade as approved by GE duly edging all round the top with 05 mm teak wood beads complete all as specified and as directed.

Removing of old unserviceable legs from Table and S&F new leg made out of Teak Wood as per drg, duly finished to match the existing surfaces of the item complete all as specified.

Removing the existing unserviceable long rail from Table and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable Short Rail from Table and S&F new long rail made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Removing the existing unserviceable Stiffners from Table and S&F new Stiffners made out of Teak Wood duly finished to match the original as shown on Drg and as directed by Engr-in- charge/ GE

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L for French Polishing to all new & old surface with two coats of french polish after preparation of surface of table with high class finish ,complete all as specified & directed by Engineer-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Removing of old unservicable drawer from Table and S&F new drawer made out of 6mm thick plywood commercial BWR grade duly fixed with S/S knobs etc complete all as shown on drgs and as directed.

REPAIRS TO CHAIR DINING

Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing ,completeall as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing ,completeall as specified in drg and as directed by Engr-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Removing old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO CHAIR WRITING

Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing , complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO CHAIR EASY

Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rails of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front / back Rail of Seat and M&L for New front / back Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail of back and M&L for New side rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Top/Bottom rail and M&L for New top / bottom rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Support Rail and M&L for New support rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Removing old/worn out rubber shoes and S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Taking down old u/s Arms Rest and M&L for New arms rest made out of teak wood duly polished to match the existin,complete all as specified in drg and as directed by Engr-in-Charge.

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO CHAIR DINING OFFICER

Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Back Strip and M&L for back strip made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Removing old/worn out rubber shoes S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge

Removel of old cushion and Supply and fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. Rate of tapestry should not be less than Rs 350/- per RM,complete all as shown on drawing and as directed by the Engr - in - Charge.

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO CHAIR WBB:

Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing , complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Seat Frame and M&L for New Seat Frame made out of 12mm thick commercial Plywood ISI Marked complete All as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s bottam stiffner and M&L for New stiffner made out of teak wood duly polished to match the existing , complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s back strip and M&L for New back strip made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item, complete all as specified and directed by Engr-in-Charge

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO STOOL DRESSING CUSHION:

Taking down old U/S back side board of stool dressing and S& F new back made of Post Forming top on 18 mm thick plywood as per existing shape and size complete All as specified in drawing and as directed by Engr-in-Charge

Taking down old U/S front/side board of stool dressing and S& F new front/side board made of Post Forming top on 18 mm thick plywood as per existing shape and size complete All as specified in drawing and as directed by Engr-in-Charge

Taking down old U/S top of stool dressing and S& F new top made of 12 mm thick plywood as per existing shape and size complete All as specified in drawing and as directed by Engr-in-Charge

Taking down old U/S bottom of stool dressing and S& F new bottom made of 6 mm thick plywood as per existing shape and size complete All as specified in drawing and as directed by Engr-in-Charge

Taking down old U/S wheel of stool dressing and S& F new wheel of size 50 mm as per existing shape and size, complete All as specified in drawing and as directed by Engr-in-Charge

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO TABLE 3'x3':

Removing UNSV top and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV leg and S&F new leg made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV front rail and S&F new front rail made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO TABLE OFFICER:

Removing UNSV top and S&F new top made out of 18 mm thick pre laminated MDF Board exterior grade complete all as specified in the drg and as directed by Engr in Charge.

Removing UNSV leg and S&F new leg made out of teak wood as per existing shape and size complete all as specified in the drg and as directed by Engr in Charge.

Removing old worn out drawer from the table and S&F new drawer made out of teak wood complete all as specified in the drg and as directed by Engr in Charge .

Removing old worn out shutter of table and S&F new shutter made out of 18 mm thick pre laminated MDF board complete all as specified in the drg and as directed by Engr in Charge .

S&F in repair new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Taking down old u/s bottam stiffner and M&L for New stiffner made out of teak wood duly polished to match the existing ,complete all as specified in drg and as directed by Engr-in-Charge.

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO SIDE BOARD:

Taking down old u/s Top and M&L for New Top made out of 18/19mm pre laminated MDF board exterior grade , complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Leg and M&L for New leg made out of teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Long Rail and M&L for New Long Rail made out of teak wood complete all as specified in drg and as directed by Engr-in-Charge..

Taking down old u/s Short Rail and M&L for New Short Rail made out of teak wood complete all as specified in drg and as directed by Engr-in-Charge.

Removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Pre laminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging complete all as per drg and as directed .

Removing old worn out drawer from the table and S&F new drawer made out of teak wood complete all as specified in the drg and as directed by Engr in Charge .

Taking down old u/s Side LT/RT and M&L for New Side LT/RT made out of 18/19mm pre laminated MDF Board exterior grade complete all as specified in drg and as directed by Engr-in-Charge.

Removing old worn out Back from the Side Board and S&F new Back made out of 6mm Plywood commercial BWR grade complete all as specified in the drg and as directed by Engr in Charge.

Taking out old worn out knob from the drawer of the table and S&F new knob of best quality approved by GE/Engr-in-Charge complete all as specified and as directed .

Taking out worn out/unserviceable shoes from legs and S&F new shoes of hard PVC of superior quality with steel screw to the legs of the item complete all as specified and directed by Engr-in-Charge

M&L two coat of french polishing with high class finish on new & old surface including preperation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO BIN SOILED LINEN:

Removing old worn out top and S&F new top made out of 18/19 mm pre laminated MDF Board exterior grade duly edging 5 MM thick teak wood beading after removing old UNSV edging complete all as specified in drg and as directed by Engr-in-Charge.

Removing old worn out bottom from bins and S&F new Bottom made out of second classhard wood complete all as specified in drg and as directed by Engr - in -Charge.

Removing old worn out back of the bins and S&F new back of bins made out of 6 mm thick commercial plywood BWR Gradecomplete all as specified in drg and as directed by Engr - in -Charge.

Taking down old u/s Hinges and M&L for New Hinges ISI Marked size 75mm complete all as specified in drg and as directed by Engr-in-Charge

M&Ltwo coat of french polishing with high class finish on new and old surface including preparation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

REPAIRS TO CHAIR EASY CUSHIONED( WOODEN):

Removing of old broken seat with cushion and S&F new seat of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/- per Rm) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as directed by Engr-in-Charge.

Removing of old broken back with cushion and S&F new back of existing shape and size with 50mm thick Foam cushion 40 density covered with best quality tapestry cloth (not less than Rs 350/-per Rm) duly stitched and fixed with suitable adhesive over 12mm thick BWR plywood surface covered & screwed to track rail as Drg & directed by Engr-in-Charge.

M&Ltwo coat of french polishing with high class finish on old and new surface including preparation of surfaces,complete as per drawing to match the existing and all as per directed by Engr-in-charge.

Removing of old unserviceable arms rest and S&F new arms rest of existing shape and size (65x25mm) made out of seasoned hard wood (Shisham) duly painted with synthetic enamel black paint and fixed with steel screws complete all as specified & directed

RECANNING OF VARIOUS TYPES OF FURNITURE: M&L for removing of old/broken/ unservisable plastic cane & re-canning of chair dinnig, chair CB without arms/chair writing,chairs CB with arms, chair CB office, chair easy FD/NF, chair, stool dressing CB, Couch set & bin solied linen with 2 to 2.5mm semi round cane plastic of white colour and border with 3 to 4mm semi round cane plastic of white colour. Rest all as per drawingss. The canning work shall be done in Godraj pattern. Cane should be in White colour (Non recycled) & make as approved.

Avtarsinghchaddhaandcompany

M/s R.K.Jain

VARAROHA BUILDERS