Providing Grid Connected Solar system at Adarsh Madhyamik School, Motiwada, Ta.Pardi, Dist.Valsad.

Name of work : Providing Grid Connected Solar system at Adarsh Madhyamik School, Motiwada, Ta.Pardi, Dist.Valsad.

Qnty. Unit Item Item Description Rate in Rate in Words Per Amount

1 Supply, Installation, Testing & Commissioning of

following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron

Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating

temperature 45'C, Junction Box with Waterproof IP67 &

MC4 Compatible and Enclosed with Bypass diodes,

100% Electroluminescence test to ensure error free

Modules, Thep. temp. co-efficient of the PV module

shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit

Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg)

With 10 year Product warranty and 25 year Linear

Power Warranty., Solar Inverter: MPPT Range: 80-1000

V, Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture

Range: -25~60°C, Anti-islanding Protection: Integrated,

Input Reverse Polarity

Protection Integrated, Insulation Resistor Detection

Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short

Circuit Protection Integrated, Output Over Voltage

Protection Integrated, Protection Degree: IP65, User

Interface LCD & APP,Datalogger & Communication:

GPRS / Wi-Fi, Module Mounting Structure: Seamless

Box Pipe / 'C' Channel of suitable size for rooftop solar

installations with good stability agaist wind & weight

load., Hot Dipped Galvanized steel coils. suitable

arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the

load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor

fastner etc. the nut bolt used for installtion of stucture

should be (SS 304) quality. and Balane of System with

necessary Swithgears (Suitabel size and protection of

ACDB & DCDB), inter connecting wiring, earthing

system, lightining arrester system, all liasoning work

with various gov. dipartment like state nodal

agency,DISCOM & CEIG is included in agency scope

18 Per 1 (Excluding GEDA Application fees, Solar connectivity 42455.35 Rupees Forty Two Thousand Per

KWatt Charges, Meter connectivity Charges, Meter testing Four Hundred Fifty Five And KWatt

Charges.) (C ) Grid Tied Solar Power System: 11 - 25 Paise Thirty Five Only

2 Ea. 2 Providing and erecting Approved make Four pole 6790.43 Rupees Six Thousand Seven Per

moulded case circuit breaker having breaking capacity Hundred Ninety And Paise KWatt

ICU of 25 KA. at 415 V,having normal current rating up Forty Three Only

to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III [With Enclore]

1 Ea. 3 Providing and erecting busbar chamber confirming to IS- 5731.75 Rupees Five Thousand Seven Per

375 fabricated from 16 G.M.S. sheet, dust & vermin Hundred Thirty One And KWatt

proof having hinged door with rubber gasket and Paise Seventy Five Only

necessary busbar supports with COPPER busbar having

current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour

insulation tape for phase sequence, three phase &

neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections. (B) Suitable

for 200 Amp. capacity

130 Ea. 4 Providing and erecting XLPE(IS:7098)(I)-88 ISI 378.75 Rupees Three Hundred Per

armoured cable multistrand Aluminium conductor for Seventy Eight And Paise KWatt

1.1 KV. to be laid on wall with necessary clamps or in Seventy Five Only

existing trench / pipe of following size of cables (D)

1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

2 Ea. 5 Providing and, fixing heavy duty flange type brass 103.02 Rupees One Hundred Three Per

double compression type cable gland with rubber ring And Paise Two Only KWatt

for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of

cables. (C) 3 & 1/2 core 70 Sq. mm

8 Ea. 6 Solder less crimping type Aluminium lugs conforming 25.25 Rupees Twenty Five And Per

to IS suitable for cable of following size evenly crimped Paise Twenty Five Only KWatt

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (E) 70 Sq.mm.

Deputy Executive Engineer,

Electrical (R&B) Sub Division,