Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹85.7 LAccepted-AOC 203 B CHAHBAI BAREILLY UP 243001 | BAREILLY | BAREILLY | UP | 243001 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹93.9 L+₹7.0 L (8.06%)Rejected-Finance 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹96.7 L+₹9.8 L (11.3%)Rejected-Finance H NO 74 TILIYAPUR CB GANJ BAREILLY UP 243502 | BAREILLY | BAREILLY | UTTAR PRADESH | 243502 | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹99.8 L+₹12.9 L (14.9%)Rejected-Finance | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹1.0 Cr+₹15.6 L (17.9%)Rejected-Finance 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L5 | Rejected-Finance Other Than L1 |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AF Bareilly
HQ CWE AF Bareilly PIN 243002
ADDN/ALTN/IMPROVEMENT TO MT SECTION AND REFUELLING SECTION AT AF STN BAREILLY.
2023_MES_625519_1
81394/E8
Open Tender
Civil Works
Item Rate
180 days
AF Stn Bareilly
As per NIT
8 documents required · 8 mandatory
₹1,000
GE AF BAREILLY
₹2.1 L
Yes
29 Dec 2023
28 Oct 2023
7 Dec 2023
28 Oct 2023
5 Dec 2023
23 Nov 2023
28 Oct 2023 - 10 Nov 2023
Amount
Dismantling old Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as spd and directed.
S & F for pre-painted Trapezoidal profiled galvalume /Zincalume AZ 150,550 MPa tensile strength profiled pre- painted steel sheet, 0.50mm thick total thickness (with coating and painting) as in roof covering/cladding, fixed with self tapping screws as per OEM recommendation (Make Hilty or equivalent as per OEM), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrugation side lap wherever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided wherever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Make:Jindal Steel works Ltd,Tata Blue Scope,Colour roof india Ltd. Note : 1. The colour of sheet for bldg shall be approved by GE. 2. Sheeting shall be fixed of any height.
S & F Pre- painted factory made plain galvalume/Zincalume aluminum zinc coating ridge of 0.50 mm thick of approved colour having tensile strength of 550 MPa AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws and all as specified and directed. Make:Jindal Steel works Ltd,Tata Blue Scope,Colour roof india Ltd.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work complete all as spd and directed.
M & L Second class hardwood clean sawn in scantlings fixed in timber framed work complete all as spd and directed..
Preparing surfaces of wood or wood based material, new or old, of any discription and girth, not otherwise discribed and treated with a coat of creosote.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd and directed.
M & L for Flyash Brickwork with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 and complete all as specified and directed.
Taking down cement plastering on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, and any debries etc complete all as specified and directed
M & L for 15 mm thick on other than fair face of brick-work or on one side of lathing or concrete surfaces ,in cm 1:4 of brickwork, concrete and making even and smooth without using extra cement. Complete all as spd and directed
Preparation of newly plastered surface of wall and applying two coats of Exterior emulsion paint over a coat of primer in camouflage pattern complete incl all as specified and as directed. Note : Colour scheme and design shall be as per latest pattern specified by AF Authorities.
M & L for Preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.
S&F steel work in tubular truses (RHS) in repair incl special shaped washers wind tie ,bolts ,plates etc complete including purlins and post using ERW or induction butt welded tubes conforming to IS 4923-2017 grade YST 310. Complete all as spd and directed.
Demolition of unreinforced cement concrete (Hardstanding) in any discription and in any position by mechanical tools and removing the debris outside the defence land complete all as specified and directed.
M & L for PCC (1:4:8 )type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass conccrete complete all as directed.
M & L for Cement concrete Type B-2 (1:2:4) (using 40 mm crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M & L for preperation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer complete all as specified and directed.
M & L for preperation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels,kerbs, aprons, etc. (each layer) laid bedded and pointed in any mortar complete all as spd and directed.
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M & L Roof treatment using using Polymeric water Proofing Membrane in the following steps. a. M&L for rendering 15 mm thick cement plaster in cm 1:3 on concete floor and levelled using WPC (to be paid saperately), finished complete all as spd and directed. b. M&L for wateer based bitumenous primer @ 1.20 Kg/Sqm applied in two coats by brush application (each coat 60 gm / sqm) etc complete all as spd and directed. c. M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified.Make :- M/s Shivam Tar Products, STP Ltd , M/s Tiki Tar danosa pvt Ltd, M/s Bengal Bitumen d.. M&L for preperation of surface and applying two coates of aluminium paint over APP membrane @ 0.250 Kg/sqm (each layer) complete all as specified and directed
Supply only Liquid water proofing compound complete all as specified and directed.
S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed.
S & F 5mm thick printed PVC sheet in strips and channel feathered at edges for fixing on solid PVC wall lining all as per specification and drawing complete all as specified and as directed.
S & F Solid PVC wall lining consist of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed. Note: PVC fillets and PVC strips shall be measured and paid seperately under respective item of BOQ.
Demolition and breaking up 150 mm bore drain pipes (PVC Drain pipes) and all as specified and directed.
S & F PVC (SWR)pipes of dia 150mm single socketed in any length with rubber ring joints fixed to ceiling, wall with suitable clamps complete all as specified and directed.Make : Supreme, Astral Ltd, HIL Ltd .
Demolition of unreinforced cement concrete (Hardstanding) in ground floors and pavings of any thickness (below or above ground level) by mechanical tools, Diamond cutter complete all as specified and directed.
Removing demolished material (Demolished PCC/PQC) to a distance exc. 1.50 km but n exc. 10 km outside of defence land and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified & directed.
Rolling and consolidating formation surfaces in cutting with 8 to 10 ton power rollar complete all as directed.
M & L for 100 mm thick (compacted thickness) PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as insub base of road complete all as directed.
M & L for 200 mm thick (compacted thickness) PCC M-25 design mix (using 20mm graded crushed stone aggregate) as in pavement/floor casted in panels complete all as directed.
M & L for Finishing the surface concrete by brooming while the concrete is still green complete all as specified and directed.
M & L for forming 12 mm wide expansion joint , filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' for 200 mm thick concrete slab and complete all as specified and directed.
M & L for Forming Construction joint 10mm wide and 30mm deep by cutting with diamond cutter and filled with sealing compound Grade 'A' complete all as specified and directed.
M & L for forming Contraction(Dummy) joint 65mmx10mm wide by cutting with diamond cutter and filled by sealing compound grade 'A' complete all as specified and directed.
Supply and laying or fixing or passing through pipe of size 70 Sq mm 3.5 Core of 1100 Volts grade heavy duty XLPE armourade cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed nominal cross section stranded conductor complete all as specified and directed.
Supply and laying or fixing or passing through pipe of size 95 Sq mm 3.5 Core of 1100 Volts grade heavy duty XLPE armourade cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed nominal cross section stranded conductor complete all as specified and directed.
Excavation in any type of soil in trenches not exc 1.5 m wide & not exc 1.5 m in depth and getting out complete. all as specified and directed.
M & L for dry sand cushioning to underground cables with 8 CM thick before laying of cables and 15CM thick after laying and stretching of cable all a specified.
S & F well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete.
Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 of brick work and making even and smooth without using extra cement all as specified and directed by Engr-in-charge..
M&L preparation of newly plastered surfaces of wall and applying two oats of OBD over a coat of primer complete all as specified and directed.
M & L for horizontal boring under Road, pavement, hard standing complete with inserting GI pipe, light grade, of size 80mm dia complete all as specified and directed. Note :- GI pipe shall be measured and paid seperately
M & L for 80 mm bore, mild steel tubes, light grade, galvanised with all fitting laid in trenches or inserting in horizontal boaring complete all as specified and directed.
Supply, installation, testing and commissioning of factory assembled 62.5 KVA silent diesel engine driven generating Set specially designed to meet stringent of 75 dB (A) at a distance of 1 meter from the enclosure as per CPCB norms under free field conditions , with Micro- processor based Gen Set controllers display a host of Genset parameters and controls , fuel tank of suitable capacity (capacity shall not be less than 10 Hrs consumption),, designed to have optimum serviceability, air inlet louvers specially designed to operate at rated load, powder coated for long lasting service life and superior finish , use of special hardware for longer life, insulation material as per IS 8183, specifications for better sound attenuation, flush styling- no projections, Fluid drains for lube oil and fuel, fuel filling point etc. PCC foundation as per manufacturers drawings complete all as specified and comprising the following :-
(A) Prime Mover : Prime mover (Diesel Engine) suitable for driving 62.5 KVA capacity alternator, 3 phase 4 wire of 415 V, 50 Hz comprising of water cooled, direct injection, turbo charged, four stroke confirming to BS -5514 rated for continuous running capable of taking 10% over load for any one hour in 12 hours running complete with Engine control panel and including following accessories :- (i) Heavy flywheel and flywheel housing complete with starting gear ring and to suitable coupling duly covered with gaurd. (ii) Air cleaner dry type. (iii) Fan and water pump assembly. (iv) Mechanical FIP. (v) Electronic Governor. (vi) Starting motor - Electric battery charging alternator (v) Maintenance free battery 12 Volt (vii) 01 set Anti vibration pad.( viii) first filled lubricating oil and coolent
(B) Alternator : Alternater suitable for 62.5 KVA continious operation at 1500 RPM, 415 volt,0.8 PF (lag) suitable for 50 Hz, 3 phase, 4 wire system, confirming to IS 4722. The alternator is brushless type,, self excited, self regulated, Salient pole revolving field . The alternator has the following features :- (a) +1.0% voltage regulation (max) in static conditions. (b) IP 23 protection (c) class H insulation limited to temperature rise of class H (d) Permissible overload of 10% for one hour in 12 hour of operation.
(C) AMF Panel : Supply, istallation, testing and commissioning for microprocessor based factory fabricated AMF control panel indoor type system suitable for 62.5 KVA DG set with and including internal wiring, free standing, floor mounted type, vertical type, front operated, dust & vermin proof fabricated out of 14 SWG MS CRCA sheet duly undergoing with pretreatment covering degreesing water rinsing, derusting/phosphating, After pre treating sheet metal shall be sprayed with high corrison resistance primer and finally epoxy polyester podwer coating of flint grey shade. The panel consisting the following :-
(i) Aluminium bus bars TPN of Rating 200 Amp with SMC/DMC support (ii) MCB for protection of controlsystem . (iii) Digital Multifunctional energy meter , 96 mm x 96mm digital type with CT s - 01 Set . (iv) lamp indicator set of three(LED type) --- 01 No. (v) Battery charging indicator lamp --- 01 No. (vi) Auto/ Manual/Test switch --- 01 No. (vii) Battery charging Amp meter and volt meter digital type --- 01 No. (viii) MCCB, 04 pole with capacity 100 amp ICU 36 KA for 415 volt,Micro processor based release for overload and short circuit protection three phase AC supply --- 02 Nos Make: Legrand/ Siemens/ ABB. (ix) Uder/over voltage relay suitable for 3 phase 415 volt AC Supply - . (x) Electronic timer type (xi) Battery charger . (xii) Bypass arramgement with rotary type bypass change over switch of capacity 100 Amp AC on load to isolate the AMF panel at the time of low voltage. Make: Legrand/ Siemens/ Schinder /L&T . (xiii) Four pole power contactor with standard coil voltage of 415 volt 50 Hz and auxiliary contact having AC three phase rating 100Amp. Make : Siemens/ Schinder/ Legrand - 02 No. --- 01 No. Note :- Cost of control wiring from AMF panel to DG set control panel deemed to be included in unit rate .
(D) Civil Works :- As per manufacturer,s instruction (quated rates are deemed to be included in the item rates). All type of civil work like fundation, base plate with anti-vibration pad of make: Dunlop or equivalent ISI marked for engine and alternator and shock vibration absorption material including PCC plateform ( 1:2:4) type B-1 using 20 mm graded aggregate and brick work in CM 1:4 all around the foundation including finishes for resting of DG set and sound proof enclosures. complete all as specified and directed. Note : Silent DG Set will be factory assembled of reputed manufacture .
Supply, installation , testing and commissiong factory made LT feeder pillar box Outdoor type Wall mounted of size 1000x750x450mm suitable for 415 Volts 3 phase 4 wire system 50Hz supply having aluminum bus bar 200 Amps for phases and neutral, installed on porcelain / epoxy insulator. the panel shall be dust proof, vermin proof (IP54) and applying spray paintig with two coats of synthetic enameled paint over a coat of red oxide primer on sheet and made of out of 3.15 mm thick CRCA sheet self moulded type and 55x50x6 mm angle iron frame front and rear opening with double shutter and locking arranement with 50mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified. The scope of work includes provision of housing the following acceessories:-
Incoming :- (i) MCCB 125 Amp with 4 pole, 25 KA -01 No. (ii) Volt meter 0-500 Volts,Square flush pattern,digital type -01 No. (iii) Amp meter square flush pattern 0-100 Amps digital type-01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marked . (vi) Alarm System for indicate the commercial power failure. Outgoing :- (i) MCCB 100 Amp, 4 pole, 16 KA 415 volts -02 No.(1 Nos Spare) (i) MCCB 63 Amp, 4 pole, 16 KA 415 volts -01 No.
M & L for Earthing complete with galvanized steel earth plate of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron lead wire GI Strip 25x4 mm by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 40mm dia GI pipe connected to main switch board or main contral board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I, all as specified and directed by Engr-in-Charge. Note : (i) Earth resistance shall be less than 5 ohm. (ii) RCC pit cover shall be pr cast of RCC(1:2:4) type B1,80mm thick reinforced with XPM not less than 4Kg/sqm. (iii) PCC chamber shall be constructed at least 500mm away from the edge pit. (iv) Rate shall be including GI strip and GI protection of pipe of length 7.5m, excess beyound 7.5m length reqd at site shall be measured and paid separetly.
Shikhar ji Enterprises
Ikrar khan & co.
TEAM ACC INFRABUILD PRIVATE LIMITED
yash enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .