SPECIAL REPAIRS AND IMPROVEMENT OF ELECTRICAL WIRING AT CERTAIN MARRIED ACCOMMODATIONS AT AMPALAPADY AT NAD ALWAYE

Amount

Material and Labour for preparation of old decorated surface of wall and applying one coat of white wash complete all as specified and directed

Material and Labour for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed

Material and Labour for preparation of old decorated surface of wall and applying one coat of oil bound distemper complete all as specified and directed

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed

Material and Labour for rendering 15mm thick on fair faces of bricks in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

Material and Labour rendering 10mm thick on ceiling surface in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed

Material and Labour preparation of old wooden painted surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and Labour preparation of old steel painted surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material and Labour for preparation of new plastered surfaces of ceiling and apply three coat of white wash complete all as specified and directed

Material and Labour for preparation of new plastered surfaces of wall and apply two coat of oil bound distemper over a coat of priming paint complete all as specified and directed.

Material and Labour for complete removal of existing treatment applying two coat of oil bound distemper over one coat of primer on wall surface complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, ceiling etc and applying distemper/emulsion paint to match with existing surface, all as specified and directed.

Material and labour for point wiring with 1.5 sqmm PVC insulated unsheathed single core multistranded copper conductor cable, FRLS, ISI marked drawn through and including PVC conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked including 2 mm thick and 4cm depth GI sheet pressed terminal box ( recessed) with 3 mm thick laminated hylem sheet top cover including 1.50 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity conductor and making good the disturbed surfaces of walls, floors, ceiling etc and applying distemper / emulsion paint to match with existing surface, all as specified and directed for One light point controlled by one switch.

Ditto All as per Item No 13 but for One ceiling fan point controlled by one switch.

Ditto All as per Item No 13 but for One 3 pin 5 Amps socket outlet controlled by one switch on independent board.

Ditto All as per Item No 13 but for One 3 pin 5 Amps socket outlet controlled by one switch in the same board with other switches.

Ditto All as per Item No 13 but for One bell point controlled by one bell push.

Ditto All as per Item No 13 but for One light point controlled by 2 No two way switches.

Ditto All as per Item No 13 but but with 2.5 Sq mm cable for wiring and 2.50 Sqmm cable as earth continuity conductor for one 16 Amps switch socket outlet on independent board.

Taking down ceiling fan, connected cables, dismantling blades and removing fan and blades complete as directed by EIC.

Hanging only ceiling fan (Retrieved from item No 20) and connecting up including provision of cable from ceiling rose or connector to fan complete as directed by EIC.

Material and Labour for Painting of ceiling fans, complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after including cleaning all dust etc, complete all as specified and as directed

Supply & Fix fluorescent LED tube light fitting, 1x20W, 230V,with extruded aluminium housing and high quality PC Diffuser, efficiency of 125 Lumen/watt including LED lamp of 20w complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix switch piano, flush type, 6 Amps, SP, one way, complete all as specified and directed.

Supply and fix switch piano, flush type, 6 Amps, SP, two way complete all as specified and directed.

Supply and fix socket outlet, flush type, 6 Amps, 2/3 pin, complete all as specified and directed.

Supply and fix ceiling rose, surface type, bakelite, 65x50mm, 3 terminals, complete all as specified and directed.

Supply and fix switch socket combination, 2/3 pin, 06Amps, flush type, complete all as specified and directed

Supply and fix switch socket combination 6 pin 6/16Amps, flush type, multipurpose, complete all as specified and directed.

Supply and fix bell push, flush type, 6 Amps, complete all as specified and directed.

Supply and fix call bell, AC, 230 Volts, single pole, complete all as specified and directed.

Supply and fix fan regulator, electronic socket type, hum proof, AC, 240 Volts, 5 step, all as specified and directed.

Material and labour for sub main wiring with 2 runs of 4 Sq mm PVC insulated unsheated single core multistraded copper conductor cable, FRLS, ISI marked and one run of 4 Sq mm multistranded insulated copper conductor cable, FRLS, ISI marked as earth continuity conductor drawn through and including PVC conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked and making good the disturbed surfaces of walls / floors / ceiling etc and applying distemper / emulsion paint to match with existing surface, including removing the existing aluminium sub main wiring cable, complete all as specified and directed.

Supply and fix in repair sheet metal enclosure for MCB DB TPN 4 ways, 415V with 200 Amps bus bar, double door, complete all as specified and directed.

Supply and fix in repairs sheet metal enclosure for MCB DB SPN 12 ways, 240V, with 200 Amps bus bar, double door, and complete all as specified and directed.

Supply and fix MCB SP 6 to 32 Amps, 220 V, 10 KA, C series complete all as specified and directed.

Supply and fix Isolator, DP 32 Amps, 220 V, 10 KA, C series complete all as specified and directed.

Supply and fix MCB TPN 63 Amps,415 volts AC,10 KA, C series complete all as specified and directed.

Supply and fix lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed

Supply and fix LED lamp 09 W 230 V AC all as directed.

Material and Labour for Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point indicated including testing on completion complete all as specified and directed.

Excavation in trenches in Soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying pipes, cables etc, and getting out complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and laying fine dry river sand to entire width of trench as cable cushion in trench for cable complete all as specified and as directed.

Supply & laying un reinforced pre cast concrete cable cover class LV type 1 flat size 250mmx150mmx40mm complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, glavanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sqmm 3.5 core complete all as specified and as directed

Ditto All as per item No 47 but for cable size 120 sqmm 3.5 core

Ditto All as per item No 47 but for cable size 95 sqmm 3.5 core

Ditto All as per item No 47 but for cable size 50 sqmm 3.5 core

Ditto All as per item No 47 but for cable size 25 sqmm 4 core

Ditto All as per item No 47 but for cable size 16 sqmm 4 core

Ditto All as per item No 47 but for cable size 16 sqmm 2 core

Ditto All as per item No 47 but for cable size 10 sqmm 2 core

Supply & laying in replacement Galvanised steel tubing of size 40mm bore, light grade to be fixed on walls or laid under roads for passing cables complete as specified and as directed.

Ditto All as per item No 55 but for steel tubing of size 80mm bore, light grade.

Material and Labour for drilling suitable dia horizontal bore holes for insertion/ laying of 80 mm bore GI Tubing of any description below/under existing road surfaces / floors at a level not less than 0.60 metre etc, with using mechanical or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed by Engineer-in-Charge. Note: (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the department.

Supply and Fix earthing complete with galvanised steel earth plate electrode 60x60x6 mm thick ,buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 32 x 6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as specified in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing complete including taking down the old complete all as specified and as directed.

Supply and fix 3 core flexible copper cable 1.5 sqmm from pole to street light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix double compression copper/stainless steel gland for fixing armoured cable in panel/junction boxes of size 2 core 6 to 16 sqmm.

Supply, erection, Testing and commissioning of thermoplastic polycarbonate IP65 indoor free standing type LT Panel board with 400 amps rated copper bus bar, made of high quality Polycarbonate PC - GFS (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, self-extinguishing, having high impact against mechanical load, made of halogen and silicon free recyclable material conform to RoHS directive 2002/95/EC, UV resistant according to IEC 61439-1, having high grade internally embedded gasket made of Polyurethane ( PUR ). For better safety enclosure should withstand glow wire test at 960 Deg. C in accordance with IEC 60 695-2-11 UL subject 94, should be flame retardant and self-extinguishing in nature. The panel board manufacturer shall have CPRI certification for similar panels in accordance with IEC60439-2. Fully wired as per latest electrical standards ready to use. (Size of panel without pedestal 1500x1200x330mm) with 40x40x6mm MS angle iron floor mounting frame and with GI canopy, consisting the following :- A. Incomer (a) MCCB 4P, 400 Amps, 50 KA, 415 Volts. - 01 NoB. B. Outgoing (a) MCCB FP, 250 Amps, 36 KA, 415 Volts. 01 No (b) MCCB FP, 160 Amps 36 KA 415 Volts. -01 No (c) MCCB FP, 100 Amps 25 KA 415 Volts. -02 No (d) MCB TP, 32 A, - 03 nos (e) RYB LED indication lamp - 01 set (f) Digital Multifunction meter with suitable size of CT's. - 01 Each

Supply, erection, Testing and commissioning of thermoplastic polycarbonate IP65 outdoor free standing type LT Panel board with 400 amps rated copper bus bar, made of high quality Polycarbonate PC - GFS (shock proof, rust free, corrosion free, acid and chemical resistant, fire retardant, self-extinguishing, having high impact against mechanical load, made of halogen and silicon free recyclable material conform to RoHS directive 2002/95/EC, UV resistant according to IEC 61439-1, having high grade internally embedded gasket made of Polyurethane ( PUR ). For better safety enclosure should withstand glow wire test at 960 Deg. C in accordance with IEC 60 695-2-11 UL subject 94, should be flame retardant and self-extinguishing in nature. The panel board manufacturer shall have CPRI certification for similar panels in accordance with IEC60439-2. Fully wired as per latest electrical standards ready to use. (Size of panel without pedestal 1200x1200x214mm) with 40x40x6mm MS angle iron floor mounting frame and with GI canopy, consisting the following:- A.Incomer (a) MCCB 4P, 250 Amps, 25 KA, 415 Volts 415 Volts. - 01 No B.Ougoing (a) MCCB FP, 125 Amps 25 KA, 415 Volts. 01 No (b) MCCB FP, 40 Amps 25 KA 415 Volts. -06 No (c) RYB LED indication lamp - 01 set (d) Digital Multifunction meter with suitable size of CT's. - 01 Each

All as per item No. 62 above (Size of panel without pedestal 900x900x214mm ) with 40x40x6mm MS angle iron floor mounting frame and with GI canopy, consisting the following :- A. Incomer (a) MCCB FP, 160 Amps 25 KA 415 Volts. - 01 No B. Out going (a) MCCB FP, 125 Amps 25 KA, 415 Volts. 01 No. (b) MCCB FP, 40 Amps 25 KA 415 Volts. -02 No (d) LED indication lamp, with 2 Amps control MCB- 01 set (e) Digital Multifunction meter with suitable size of CT's. - 01 Each

All as per item No. 62 above (Size of panel without pedestal 900x750x214mm) consisting the following:- A. Incomer (a) MCCB 4P, 415 volts, 50 Hz, 100 Amps, 25 KA - 01 No B. Out going (a) MCCB FP, 40 Amps 25 KA 415 Volts. - 03 No (b) MCB SPN,20 Amps 10 KA, C Series. - 02 No (c) RYB LED indication lamp - 01 set (d) Digital Multifunction meter with suitable size of CT's. - 01 Each

All as per item No. 62 above (Size of panel without pedestal 900x750x214mm) consisting the following: - A. Incomer (a) MCCB 4P, 415 volts, 50 Hz, 100 Amps, 25 KA - 01 No B. Outgoing (a) MCCB FP, 40 Amps 25 KA 415 Volts - 03 No (b) RYB LED indication lamp - 01 set (c) Digital Multifunction meter with suitable size of CT's. - 01 Each Notes for item Sl Item No 61 to 65:- (i) Rate quoted includes all materials such as MCCBs, MCBs, Multifunction meter, Indicating lamps, Thimbles, Cable Glands of size 25 to 150 sqmm etc. (ii) MCCBs shall be with 415 Volt adjustable thermal magnetic release setting.

Taking down and Supply and Fix LED street light 45 watts fitting with pressure die cast aluminium housing heal resistant toughened glass, IP 65 protection complete all as specified and as directed

Supply and fix Outdoor type, weather proof, thermoplastic polycarbonate cable Junction Box of Size 155x210x92 mm , IP-66/69 in accordance with IEC60529 , with 5 pole terminal suitable to terminate upto 25 sqmm 4 core and 2 core cables with metric knockouts on side walls, including SP MCB 6 Amps complete all as specified and as directed.

Dismantling and taking out of old existing unserviceable steel & iron items from poles such as cross arms, bracing, supports, Clamps and back plate fabricated from structural steel sections including nuts & bolts washers of any description and in any position from LT over head lines poles/street light poles complete all as specified and directed.

Dismantling and taking out of old existing unserviceable insulators of any description and in any position from LT OH line poles & Steel light poles complete all as specified and as directed

Dismantling and taking out of old existing unserviceable guard wire of any description and in any position from LT OH line poles & Steel light poles complete all as specified and as directed

Dismantling and taking out of old existing unserviceable aluminium conductor of any description and in any position from LT OH line poles & Steel light poles complete all as specified and as directed

Material and Labour for PCC 1:3:6 type D2 using 40 mm graded stone aggregate complete all as specified and as directed.

Amount of Credit Schedule shall be deducted to arrive the Contract Sum.

RASNA ENTERPRISES

PHEJAYS AGENCIES

Jack Electrolinks Private Limited

Sreema Enterprises

WELTRONENGINEERINGSERVICES

M/s.Rejoy Constructions