Providing 3 phase electrical connections, light points and 6A plug points for new Laboratory at Production 301

Amount

Wiring for light / Fan points with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class ivory coloured PVC conduit with modular switch, modular plate, suitable G. I box earthing the point with 1.5 sq mm green coloured FRLS PVC insulatd copper conductor single core cable etc, as required. (Group C)

Supplying and fixing of 20 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of 3 x 1.5 sq. mm FRLS PVC insulated copper conductor, Flexible cable in the existing surface/ recessed PVC conduit as required

Supplying and drawing of 6 x 2.5 sq. mm FRLS PVC insulated copper conductor, Flexible cable in the existing surface/ recessed PVC conduit as required

Supplying and drawing of 3 x 4 sq. mm FRLS PVC insulated copper conductor, Flexible cable in the existing surface/ recessed PVC conduit as required

Supplying and drawing of 3 x 6 sq. mm FRLS PVC insulated copper conductor, Flexible cable in the existing surface/ recessed PVC conduit as required

Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 4 sq. mm + 2 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable with surface/ recessed medium class PVC conduit as required.

Supply of 1.1 kV grade 3.5C x 70 sq.mm, Aluminium conductor XLPE insulated PVC sheathed armoured power cable as required.

Laying and fixing of one number 1.1 kV grade Aluminium conductor XLPE insulated PVC sheathed armoured power cable of 3.5C x 25 sq.mm size, clamping on wall using suitable metal clamps spacing not exceed 50 cm etc. as required.

Laying and fixing of one number 1.1 kV grade Aluminium conductor XLPE insulated PVC sheathed armoured power cable of 3.5C x 70 sq.mm size, clamping on wall using suitable metal clamps spacing not exceed 50 cm etc. as required.

Supply and making end termination with brass compression gland and aluminium legs for 3.5C x 25 sq.mm (28 mm) size of XLPE insulated PVC sheathed armoured aluminium cable as required.spacing not exeed 50 cm etc. as required.

Supply and making end termination with brass compression gland and aluminium legs for 3.5C x 70 sq.mm (38 mm) size of XLPE insulated PVC sheathed armoured aluminium cable as required.spacing not exeed 50 cm etc. as required.

Supply and laying one number of the 8 SWG good quality bare copper wire along the cable with connections etc. as required.

Supplying and fixing 5 to 32 A rating, 240 V, 'C' curve miniature circuit breaker suitable for inductive load Single pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 to 32 A rating, 240 V, 'C' curve miniature circuit breaker suitable for inductive load Double pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 to 32 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load Triple pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load Triple pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 to 32 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load Four pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load Four pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 25 A rating, Double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 100 A 16 kA FP MCCB (Thermal magnetic : O/L & S/C protection) in the existing MCCB DB, complete with connections, testing and commissioning etc. as required.

Supplying and Replacing the existing 32A 415 V TPN SFU with 125 A 25 KA 4P MCCB (Thermal magnetic : O/L & S/C protection) with seperate base, rotary handle, set of 4 spreaders & separators in the existing Panel board, complete with making connections to the MCCB (with suitable size copper bar if required) , testing and commissioning etc. as required. (Rate must be inclusive of all the charges for fixing the MCCB with required accessories, minor industrial works & providing connections from the bus bar)

Supplying and fixing 4 pole metal enclosure on surface / recess, complete with earth bar, din bar, detached gland plate, interconnection, phosphetized and powder painted including earthing etc. as required.

Supplying and fixing 12way Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) as required .

Supplying and fixing of 3 phase 8 way (8 + 24), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .

Supplying and fixing of 3 phase 4 way Double door surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, 2 neutral bar, earth bar, din bar for mounting MCBs (but without MCBs & MCCB and incomer ) as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 20/25 A modular DP switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 25 A modular socket, connections etc. as required.

Supply and fixing of recess mounting type (square type),1x1or nearest size of 15 W, 1500 lm, 5700K, CRI >80, Efficacy >100 lm/watt, THD <10% cool white LED luminaire with white flat light opal diffuser, Robust PDC aluminum housing with LEDs complete with all accessories etc, as required. (Crompton -CDR-208-15-57-SL-NWH or compatible) *** Bidder should submit OEM warranty certificate minimum 02 year or above along with supply of product at site.

Supply and fixing of recess mounting 2X2, 36 W, 3600 lm, 6500K, CRI >80, Efficacy >100 lm/watt, THD <30% cool white LED luminaire with white flat light opal diffuser, white powder coated CRCA sheet housing with LEDs complete with all accessories(including frame if required) etc, as required. (Philips -RC360B LED36S-6500 V1 L60W60 PSU OD or compatible) *** Bidder should submit OEM warranty certificate minimum 02 year or above along with supply of product at site.

Supply and fixing of 400 mm sweep wall fan, with three speed positions with pulling cord and giving connections etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Charges for removing the existing PDB incomer cable 3.5C x 25 sq.mm size clamped on wall from the main switch board, making good the damages of the wall / floor, painting other accessories and conveyance of the material to the godown without any damage etc. as required.

Charges for removing the existing Light/ Fan points including wiring & pipe, making good the damages of the wall / floor, painting other accessories and conveyance of the material to the godown without any damage etc. as required.

JAITECH ENGINEERS

Helvus engineering