IMPROVEMENT OF FLOORING PLASTERING ROOFING AND SANITARY FITTINGS OF GUARD ROOM AND ADDITION AND ALTERATION TO MAIN GATE AND SENTRY POST AT ICGS KAKINADA

Amount

Taking down cement plaster on brick or concrete surface in any description etc. including racking out joints, hacking for key, scrubbing down with water and removal of rubbish from the premises complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc. but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and as directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removal of serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

M&L for 40 mm thick PCC(1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in flooring finished fair and even without using extra cement complete all as a specified and as directed.

M&L for Non skid ceramic tiles of dark shade 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 complete all as specified and as directed. Make: Spartek / Johnson / Kajaria / Somany / Orient / Cera

M&L Coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete over and including 10 mm thick backing coat in Cement bortar 1:3 complete all as specified and as directed. Make: Spartek / Johnson / Kajaria / Somany / Orient / Cera

M&L Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement in two layers one layer 10 mm in cement mortar 1:6 and second layer 5 mm thick in CM 1:4 including mixing with liquid WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- Liquid WPC will be measured and paid separately)

M&L for rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral liquid water proofing compound.

M&L for 5 mm thick plastering in CM (1:4) finished even and smooth on ceiling surfaces complete all as specified and as directed.

M& L for Preparation of new plastered surfaces and applying two coats of distemper oil emulsion over a coat of primer over 3 mm thick putty on wall surfaces including rubbing with emery paper to make wall surface smooth and even complete all as specified and as directed. Make : Asian / Berger / Shalimar / Nerolac / Jenson & Nicholson

M& L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

M & L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M & L for Preparation of new plastered surfaces and applying two coats of exterior weather proof (100% acrylic paint) paint over a coat of primer on walls complete all as specified and as directed. Make: Apex Ultima [Asian] / Extra Maxium Ultra [Shalimar] / Weather Coat [Berger Paints Ltd.] / Dulax / Royal Acrylic [Crimson Paints Pvt Ltd.] / Jotun India Pvt Ltd

Taking down PVC door frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S squre tube suppling & fixing in opening as per specification & drawing complete all as specified and as directed. Make : Rajashri Plastiwood / Sintex / Nandi

S & F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings complete all as specified and as directed. Make : Rajashri Plastiwood / Sintex / Nandi

Taking down shutters of any description not exceeding 1 Sqm eachcomplete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints complete all as specified and as directed.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [Two Panel] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed. Note: The spices of timber for shutters shall be BIJASAL / HALDU

S&F 30 mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered chamfered or rounded, fitted with cut mitered beads for securing class etc. sizes of me-mbers of shutters as specified in SSR Part I,Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick second class hard wood glazed & skeleton shutters for windows, ventilators, etc., open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) complete all as specified and as directed.

S&F Butt hinges of 75 mm size, medium weight, cold rolled mild steel. complete all as specified and as directed.

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 100mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed..

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

Cutting holes in brick walls exc. half brick but n. exc fullbrick wall in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass / Triveni Float Glass

S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

M&L for preparation of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

M & L for Preparing steel surface of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Make: Shalimar Paints Ltd. [Superlac] / Asian [Apcolite] / Berger [Luxol] / Jenson & Nicholson Paints Ltd [Brolac]

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F tubes 15 mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata Steel Ltd. / Jindal steel

S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. Make: Surya Roshni Ltd / Tata Steel Ltd. / Jindal steel

S&F in repairs fancy type Bib tap 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. Make: Water tec / Prayag / Shakti

S&F in repairs fancy pillar taps of 15 mm bore PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed. Make : Water tec / Prayag / Shakti

S&F in repairs 15 mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless/Jaquar

S&F in repair vitreous China wash hand basin, white, flat back, size 630 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. Make : M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repair PVC valve less, syphonic action type, flushing cistern of 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

M&L for surface excavation n.exc. 30 cm deep and averaging 17.5 cm in deep and getting out soft/loose soil complete all as specified and directed.

M&L for hardcore of broken stone or stone boulder hard core of gauge n.exc 0.63 mm deposited, spread and levelled in layers watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregates as in sub base of floors and paving's finished even and fair complete all as specified and as directed.

M&L for 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in floor finished or similar work etc fair and even without using extra cement complete all as specified and as directed.

M&L for prepolished cement concrete chequered tiles of size 300 x 300 x 20 to 25 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make: Ultra / Bansal / Nitco / Anjali / Multiwyn

S&F Continuous brick edging with old size fly ash bricks; with width equal to the width of the brick; laid on end at required angle complete all as specified and as directed.

Removing the existing treatment from the roof,Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc, M&L for brushing neat cement slurry with 3 Kg of cement per Sqm, M&L for 25 mm thick cement concrete (1:3:6) type B-1, using 20 mm graded stone aggregate , screed bed 5 mm thick on fair faces of concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound @ 5% by weight of cement, Provn of APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 @ 1.2 Kg / Sq.M each at top and bottom of the membrane followed by a coat of bituminus aluminium paint @ 0.50 lit / sqm complete including sealing all joints by thermo fusion with minimum 10cm overlap and on vertical surface the membrane shall be inserted in grooves and packed in CM (1:3) all as per manufacturers instructions on non accessible roofs complete all as specified and as directed. Make : M/s. HYPERPLAS IWL CHENNAI/ M/s. MULTIPLAS BY STP TEXES LIMITTED ,GOREGOAN/ M/s. STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA/ M/s. SHIVAM TAR PRODUCTS . (Note :- Liquid WPC will be measured and paid separately)

M&L for excavation in trenches, n.exc 1.5m wide and 1.5m in depth for foundation, etc or for shaft, wells, cesspits, manholes pier holes, etc n.exc 10sqm on plan and n.exc 1.5m in depth and getting out soft/ loose soil complete all as specified and as directed.

M&L for PCC type D-2,1:4:8 (40mm graded stone aggregate) as in foundations, filling in mass concrete complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surfaces including necessary form work in CM 1:2, 20mm thick complete all as specified and as directed.

M & L for RCC M-30 (design mix) using 20 mm graded stone aggregates in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item No.59 here-in-before but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating trapizoidal profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in charge. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screw complete all as specified and directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to IS 1161-1979 Gde-St -240 complete all as specified ans as directed.

S&F, Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long. Dia of neck 5 to 10 mm complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 surfaces finished fair and even.complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type 'C-2' (using 40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 100 mm thick PCC type C-2, 1:3:6 (40mm graded stone aggregate) as in hard standing of floor complete all as specified and as directed.

S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. Make: Jaquar & Company Pvt. Ltd. / Prayag / Kohler / Roca / Cera [First Quality] / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

S&F Vitreous China wash basin, white, pedestal, flat back, size 630 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. Make: Jaquar & Company Pvt. Ltd. / Prayag / Kohler / Roca / Cera [First Quality] / Hindware [Italian Collection] / Parryware [Superfine] / Johnson Pedder

S & F 32 mm dia PVC waste pipe fixed to Wash Hand Basin complete all as specified and as directed.

S&F PVC connection pipe 450 mm long with nut and bolt at both ends for hot and cold water complete all as specified and as directed.

S&F 20 mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F 15 mm bore swivel shower of PTMT any colour for fixing with 15 mm GI pipe including 15 mm size,190 mm long with bend of 45 degree with flange of PTMT complete all as specified and directed. Make: Water tec / Prayag / Shakti

S&F Towel Rail 450 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed. Make: Water tec / Prayag / Shakti

S&F Soap dish, vitreous China white, approximate size 160 x 160 x 90 mm complete all as specified and as directed.

S&F grating doom 100 mm dia of PTMT minimum weight 25 grams complete all as specified and as directed.

S&F 15 mm bore Bib taps standard of PTMT any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed. Make: Water tec / Prayag / Shakti

S&F PVC (SWR) gully/floor trap 110 mm setting and jointing with solvent cement including taking down old one and make good the disturbed surfaces of floor with the existing floor and all as specified and as directed.

S & F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make: Supreme / Prince / Sudhakar / Infra

S & F in repairs PVC (SWR) 75 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make: Supreme / Prince / Sudhakar / Infra

S&F PVC (SWR) bends 75 mm dia with access door complete all as specified and as directed. Make: Supreme / Prince / Sudhakar / Infra

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed. Make: Supreme / Prince / Sudhakar / Infra

M&L for two coats of cement base paint on new plastered surfaces of brick or concrete wall surfaces complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of brick or concrete wall surfaces over a coat of priming coat complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F 250 mm long anodised aluminium sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and as directed.

S&F 125 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100 mm size stainless steel medium weight butt hinges, mild steel cold rolled and fixed on chowkhat complete all as specified and as directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodisedcomplete all as specified and as directed.

Removing excavated material exc 250 m but n.exc 500 m and depositing where directed complete all as specified and directed.

Returning, filling in , including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and directed.

S&F Mild steel, plain, black sheet of 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting, dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick rendering of CM (1:3) including cutting and polishing complete all as specified and as directed.

S&F in repairs framed work such as gates, grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, ornamental and intricate design, portions framed and hung as gates, including pintle hinges, hold fast, stops, hand-made sliding bolts, etc complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in hold fast, PCC Bed blocks incl finished all exposed surfaces of concrete incl necessary form work etc. complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparing old steel surface of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint complete all as specified and as directed.

M&L Plain Cement Concrete Type C-1 1:3:6 ( using 20 mm graded granite stone aggregate) as in coping including necessary form workc omplete all as specified and directed.

M&L for complete removal of existing treatment of old plastered wall surface and applying two coats of cement based paint over one coat of white wash complete all as specified and as directed.

M & L for preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparation and applying two coats of white wash on ceiling surfaces complete all as specified and as directed.

S & F in repairs stainless steel letters project type of size 30 cm (12 ") ht each fixed with anchor fasteners complete all as specified and as directed.

Supply and Lay of LT XLPE cable 25 sqmm 4 core with aluminium conductor, screened bedded multistranded 1100 volts grade in galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium condutor complete all as specified and as directed. Make: Havells / Gloster Cables / KEI Industries Ltd / Polycab / Asian Cables / Finolex.

Supply and Lay of LT XLPE cable 06 sqmm 2 core with aluminium conductor, screened bedded multistranded 1100 volts grade in galvanised steel strip or wire armoured, heavy duty electric power cable with stranded aluminium condutor complete all as specified and as directed. Make: Havells / Gloster Cables / KEI Industries Ltd / Polycab / Asian Cables / Finolex

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying cable and getting out, in Hard / Dense Soil complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Supply & spreading in trenches dry river sand for cable protection and punning down gently by hand complete all as specified and as directed.

Supply and lay cable cover for LT Cable Class LV, type1 , flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed.

S & F FRP cable looping box of size 250 x 250 x 105 mm with connector block 4 Way, including provision for 1 Nos of MCB SP 6 Amp, copper shorting strips etc including suitable stainless steel gland, including provision for connecting earth continuity conductor etc. complete all as specified and as directed. Make : Sintex /Hansel

S & F in repairs LED bollard light fittings 09 Watts, City Cube Bollard, IP-65 with base plate and complete all as specified and as directed. Make - Philips part No BCP400 or equivalent in Havells / Bajaj

S & F in repairs LED Post Top Lantern light fittings 70 Watts,Tycoon Bollard, IP-65 with base plate and complete all as specified and as directed. Make - Havells part No Tycoon or equivalent in Havells/Bajaj

S & F in repairs LED Focus light fittings 120 Watts, City cube Bollard, IP-65 with base plate and complete all as specified and as directed. Make - Havells part No JETA IRIS or equivalent in Havells/Bajaj

M&L for cutting into the existing road / hard standing surfaces to a depth of 60cm and 50cm wide and getting out for laying under ground cable including returning filling in, watering, well ramming in layers not exceeding 25 cm in any type of soil and filling the top surface 15 cm thick with PCC 1 : 2 : 4 type B1 using 20 mm graded stone aggregate and finished even and fair without using extra cement including disposal of surplus soil complete all as specified and as directed.

M & L for High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. Make: Kisan / Jain Irrigation / Supreme / Prince / Oriplast / Ajay Flow

S & F outdoor type wall mounted LT Feeder pillar Box made from MS Sheet of 2 mm thick , powder coated and finishing with gray colour with angle iron frame 40 x 40 x 6 mm including necessary earth and PCC works, for accomodating the following items : a) Copper bus bar 63 Amp for 3 phase and neutral b) MCCB 63 Amp 50 KA 4 Pole - 01 Nos (Main incoming) c) Digital Timer suitable for street lighting singlr phase-01 Nos d) Contactor ML-3, 3 Phase suitable for street lighting - 01 Nos (Outgoing)

K VENUGOPALA SWAMY