RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Twister - Outdoor Gym Equipment ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) TYPE Type Double Twister ( One standing and one sitting ) Double Twister ( One standing and one sitting ) SIZE/DIMENSIONS Length 1900 * Width 600 * 1/5 Height 1430 * CAPACITY Maximum User Weight ( Kg ) 120 120.0 MATERIAL Governing Specification for GI Pipes BIS specification No IS 1239 ( Part 1 )- 2004
Requiredlatest BIS specification No IS 1239 ( Part 1 )- 2004
Requiredlatest All the GI Pipes are ISI marked Yes Yes Main Central Pipe 100mm Nominal Bore G.I. Pipe 80mm Nominal Bore G.I. Pipe
Required100mm Nominal Bore G.I. Pipe
Required125 mm Nominal Bore G.I. Pipe
Required150mm Nominal Bore G.I. Pipe Main Frame Pipe
RequiredClass as per IS 1239 Medium Medium Main Central Pipe ( As per Clause 3
Requiredof IS 1161 ) Nominal Bore & Wall Thickness 80 mm NB with 3.2 mm Thickness * Grade Material as per table 2 of IS 1161 Not Applicable Not Applicable Standing/Sitting Twister Frame Pipe 32 mm Nominal Bore G.I. Pipe 32 mm Nominal Bore G.I. Pipe Standing/Sitting Twister Frame Pipe
RequiredClass as per IS 1239 Medium Medium Standing/Sitting Twister Frame Pipe (As per Clause 3
Requiredof IS 1161 ) Nominal Bore & Wall Thickness 40 mm NB with 2.9 mm Thickness 40 mm NB with 2.9 mm Thickness Grade Material as per table 2 IS 1161 Not Applicable Not Applicable Rotating Disk Support Pipe at Bottom Pipe 80 mm Nominal Bore G.I. Pipe 80 mm Nominal Bore G.I. Pipe Rotating Disk Support Pipe
RequiredClass as per IS 1239 Heavy Heavy Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3
RequiredNominal Bore & Wall Thickness 80 mm NB with 3.2 mm Thickness 80 mm NB with 3.2 mm Thickness 2/5 Grade Material (as per table 2 of IS 1161 ) Not Applicable Not Applicable Handle Frame Pipe 32mm Nominal bore G.I. pipe 25mm Nominal bore G.I. pipe
Required32mm Nominal bore G.I. pipe
Required40 mm Nominal bore G.I. pipe Handle Frame Pipe
RequiredClass as per IS 1239 Heavy Heavy Handle Frame Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 32 mm NB with 2.6 mm Thickness 32 mm NB with 2.6 mm Thickness Grade Material per table 2 of IS 1161 Not Applicable Not Applicable Foundation Pipes with anchoring 750mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm 750mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm
Required500mm deep GI Pipe
Requiredsupported with M.S. Angle 25 X 25 X 4mm Nominal Bore of Foundation Pipe 80mm 80mm Foundation Pipe
RequiredClass as per IS 1239 Heavy Medium
RequiredHeavy Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3
RequiredNominal Wall & Thickness 80 mm NB with 4 mm Thickness 80 mm NB with 4 mm Thickness Grade Material (as per table 2 of IS 1161) Not Applicable Not Applicable M S Foundation Plate Thickness 10 10.0 Galvanization of all Pipes Zinc coating on the tubes shall be in accordance with IS 4736 latest. * Movement must be supplied with bearings Yes * Bearings Ball Bearing Ball Bearing
RequiredTapered Roller Bearing Bearings shall be self lubricating and sealed for protection against Rain and dust etc Yes * 3/5 Nuts and Bolts for Assembly G.I. * Foot Rest Aluminum casting material Aluminum casting material Closing Caps of open ends of the pipes
Requiredbearings
Requiredbushes and base HDPE * Thickness of closing caps ( min ) 3 * All Plastic Components U V stabilised
Requiredweather resistance * COLOUR Colour Red * Paint/Finish Powder Coated
RequiredUV resistant * Paint Coating Thickness ( min ) 80 * OTHER REQUIREMENTS Other Requirement Ergronomic Design
RequiredEquipment shall be free from entrapments and sharp edges
RequiredInstallation Instructions must be provided * Installation Included Included Safety and quality Requirements European Standard EN 16630: 2015 latest * Instruction Plate Stainless Steel
RequiredSize 150 X 230 X 0.7mm
Requiredwith indelible printing * CERTIFICATION Certfication ( Safety and Quality Requirements ) No As per European Standard EN 16630
RequiredNo Registration No and Validity of Registration - * APPROVAL Drawing depicting detailed dimensions and foundation details shall be got approved from buyer before installation
Requiredif desired by buyer Yes * WARRANTY Warranty ( years ) 2 2.0 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
