Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.5 LAccepted-AOC | 1 | Accepted-AOC LOW | |
| 2 | Rejected-Technical | - | Rejected-Technical high |
| Sl No | Description | Qty | Unit | N V RAMESH L2 | Ajayakumar Associates L1 |
|---|---|---|---|---|---|
| 1.00MAINTENANCE | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 136.36 | kg | 600 ₹81,815.4 | 584 ₹79,633.66 Lowest |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 26.83 | kg | 715 ₹19,186.31 | 708 ₹18,998.47 Lowest |
| 1.00 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 88.73 | sqm | 1,220 ₹1,08,254.26 | 1,210 ₹1,07,366.93 Lowest |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 6 | sqm | 1,285 ₹7,710 | 1,278 ₹7,668 Lowest |
| 1.00 | OD356769/2025-2026:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place
method normal. Construction of granular sub-base by providing local material spreading
inuniform layers with motor grader on prepared surface, mixing by mix in place method
withrotavator at once and compacting with smooth wheel roller to achieve the desired
densitycomplete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using
Gravel mix
soil.
Soil gravel mixture/ quarry waste
(Local material as per Table 400.13) As per Item No.4.2 of Chapter 4 | 3.36 | cum | 2,260 ₹7,593.6 | 2,258 ₹7,586.88 Lowest |
| 1.01 | OD356770/2025-2026:Flooring with interlocking cobbles 60mm thick minimum strength 4kg/cm2 over a bed of 6mm metal filling in 50mm average thick and compacting using earth hammer/ compacting machine hand operated including cost and conveyance of all materials labour charge,pointing edges etc | 33.6 | sqm | 965 ₹32,424 | 961 ₹32,289.6 Lowest |
Tender Value
₹2.5 L
EMD Value
₹6,342
Closing Date
27 Feb 2026, 11:00 amClosed
AE
AE
Increasing Facilities to Homeo Hospital- RETENDER
2026_LSGD_838103_11
06/AE/LSGD/VLA/25-26
Open Tender
Civil Works - Buildings
Item Rate
VALLACHIRA
Please refer Tender documents.
10 documents required · 10 mandatory
₹560
Yes
₹6,342
Yes
18 Mar 2026
20 Feb 2026
2 Mar 2026
20 Feb 2026
27 Feb 2026
20 Feb 2026
MAINTENANCE
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
OD356769/2025-2026:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading inuniform layers with motor grader on prepared surface, mixing by mix in place method withrotavator at once and compacting with smooth wheel roller to achieve the desired densitycomplete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil. Soil gravel mixture/ quarry waste (Local material as per Table 400.13) As per Item No.4.2 of Chapter 4
OD356770/2025-2026:Flooring with interlocking cobbles 60mm thick minimum strength 4kg/cm2 over a bed of 6mm metal filling in 50mm average thick and compacting using earth hammer/ compacting machine hand operated including cost and conveyance of all materials labour charge,pointing edges etc
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1411872.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
viewsbd.pdf
Tender Documents • 1.85 MB
BOQ_1411872.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .