Special repair to road Near bldg No 1244 in Army area Jodhpur

Amount

M&L for repairs to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in roads etc cutting around edges to at least 30 mm in depth making good by applying tack coat with paving bituminous primer at 5 Kg / 10 sqm putting semidense asphaltaic concrete using 5.5% binder con10t by weight of total mix, well rammed and sealed well rammed (incl supply of premixed macadam , binder and chippings) depth of pot holes exceeding 30mm.All as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 5 kg per 10 Sqm.

Material and labour for bituminous premix semi dense asphaltic concrete , 30 mm consolidated/compacted thickness using Hot Mix plant and machenical paver with 5.5% (paving bitumen VG-30 grade) binder con10t by weight of total mix, rolled and compacted using 8 to 10 tone power road roller to require camber and gradient compl,ete all as specified and as directed by Engr-in-charge.

Scarifying or picking gravelled, maccadam or bituminous maccadam surfaces exceeding 50mm deep and area not exc. 400 Sqm all as specified and directed.

M&L for 150mm thick (compacted thickness) WBM in two layers, each layer 75mm thick (compacted thickness) with coarse stone aggregate of grading 2 (63 to 40mm size spread & rolled with 8 to12 tonne power roller, rolled and consolidated to required gradient and camber all as specified. Note: The unit rate inserted is for two layers of WBM (75mm compacted thick each layer) measured as one unit, each layer laid and compacted separately. The SSR provisions shall be deemed to have modified accordingly.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 10kg per 10 Sqm.

Material and labour for premix semi dense asphaltic concrete bituminous macadam using paving bitumen (paving bitumen VG-30 grade) penetration, with binder con10t @ 4 % of total mix, laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less)

Preparing concrete / bituminous surfaces and painting lines, dashes (contineous/un interrupted) , arrows , letters ,etc 2 mm thick with hot applied thermo plastic road marking materials all as specified in clause 803.4 of MOSRT and H Specification, white or golden yellow (IS colour No 356) complete all using road painting machine all as specified and directed by Engr- in-charge.

M&L for removing of old cat eyes fixed on roads and refixing of the same after re-surfacing complete.

S&F in repair cat's eye made of ABS plastic with beams two sides fixed with high in10sity grade Retro-Reflective sheeting in Red/Yellow colour having fixing provision of nails two nos. and complete in all respect. Make-3M/DARK EYE/TATA BP or equivalent as approved by GE.

S&F in repair of solar reflective studs ABS body 100 x 100 x 18.50mm blinker high quality and fixed with epoxy adhesive as approved by GE & as directed by Engineer-in-Charge. (Make : DARK EYE, 3M, TATA BP or equivalent)

S & F in repair road delinator along the road all as specified and as directed.(Make : DARK EYE, 3M, TATA BP or equivalent)

S&F in repair solar delinator along the road all as and as directed and specified .(Make : Dark eye Modal No :DA 112)

S&F in repair for 900mm dia reflective safety traffic mirror for road and side walk of stainless steel face, 0.90 mm thick large radius of curvature for minimum distance distrotation orange powdwr coated steel back and hood orange vinyl extrusion with 75 mm clamp brackets for pole mouting complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , foundation etc complete all as specified and directed.

S&F machine made precast cement concrete blocks (interlocking paves) rubberised coloured of 60mm thick with 6mm top layers of ante abrasive material laid over and incl 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

M&L of continuous PCC curbed stone edging with PCC (1:3:6) type C1 with using 20mm graded stone aggregate and set in CM 1:4 all as specified and directed.

M&L for laying & compacting incl water & rolling of moorum as berms average 100 mm thick all as specified & as directed.

chhaba construction

MADAN MOHAN JAIN sons

MOHIT ENTERPRISES