Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-AOC NORTH BADHARGHAT TRIPURA W PIN 799003 | WEST TRIPURA | TRIPURA | 799003 | ₹3.5 L | L1 | Accepted-AOC STOOD L1 |
| 2 | L2₹3.8 L+₹38,682.17 (11.2%)Rejected-Finance | ₹3.8 L+₹38,682.17 (11.2%) | L2 | Rejected-Finance HIGHER THAN L1 |
| 3 | L3₹4.0 L+₹49,980.71 (14.5%)Rejected-Finance HAPANIA AGARTALA PIN 799014 | AGARTALA | WEST TRIPURA | TRIPURA | 799014 | ₹4.0 L+₹49,980.71 (14.5%) | L3 | Rejected-Finance HIGHER THAN L1 |
| 4 | L4₹4.0 L+₹56,770.96 (16.4%)Rejected-Finance NHM PALACE COMPOUND AGARTALA TRIPURA | UNAKOTI | TRIPURA | 799263 | ₹4.0 L+₹56,770.96 (16.4%) | L4 | Rejected-Finance HIGHER THAN L1 |
| 5 | L5₹4.0 L+₹58,774.64 (17.0%)Rejected-Finance NIL | ₹4.0 L+₹58,774.64 (17.0%) | L5 | Rejected-Finance HIGHER THAN L1 |
Tender Value
₹5.6 L
EMD Value
₹11,132
Closing Date
24 Apr 2026, 2:00 pmClosed
The Executive Engineer Agri West Agartala
The Executive Engineer West-I Department of Agriculture and F W Agartala Tripura
Renovation of Conference Hall of Director of Horticulture and SC Office Complex Agartala.
2026_AGRI_72034_1
02/AGRI/EE(WEST-I)/2026-27
Open Tender
Civil Works
Percentage
30 days
AGARTALA
As per DNIT
6 documents required · 6 mandatory
₹1,000
₹11,132
24 Jun 2026
18 Apr 2026
24 Apr 2026
19 Apr 2026
24 Apr 2026
19 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood | |||||
| 2Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethene primer (fittings to be paid separately): 18mm thick | |||||
| 3Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | |||||
| 4Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Decorative type door. | |||||
| 5Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality) | |||||
| 6Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. | |||||
| 7Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :300x10 mm | |||||
| 8Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper | |||||
| 9Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In Charge using 100x8 sheet metal CSK screws. | |||||
| 10Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_73309.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_73309.xls
BOQ • 0.26 MB
DNIT2.pdf
Tender Documents • 3.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .