Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.9 L+₹3.5 L (9.69%)Rejected-Finance 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L2 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
REPAIRS TO PATH, PARAPETS, ROAD SIDE BERMS INCLUDING REPAIRS TO STREET /EXTERNAL LIGHTS, TIMER SWITCHES AND CONNECTED ITEMS AT MIL STN NAHAN UNDER GE CHANDIGARH
2023_MES_593067_1
GE/CHD-12/2023-24
Open Tender
Civil Works
Item Rate
270 days
Chandigarh
Class D category a(i) and b(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹90,000
Yes
22 Jun 2023
3 May 2023
31 May 2023
3 May 2023
29 May 2023
17 May 2023
3 May 2023 - 12 May 2023
Amount
Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.
M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work complete all as specified and directed.
M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work but except(old stone received) complete all as specified and directed.
M&L Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 complete all as specified and directed.
M&L Raised pointing to random or polygonal rubble, un-coursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
Sand filling under floors laid in layers not exc 15mm thick spread, levelled including watering and consolidation
Material & labour for 60mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed by Engineer in Charge. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
Material & labour for 80mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment complete all as specified and directed by Engineer in Charge. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
Material & labour for Prepolished chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material & labour for providing cement concrete Type B1 1:2:4 (20mm graded crushed stone aggregate) kerbs or mut stops, rounded or chamfered on edges etc complete including necessary form work complete all as specified and directed.
M&L providing for PCC 1:3:6 Type C-1 using 20mm aggrgate as in coping, apex stone, complete all as specified and directed.
M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) complete all as specified and directed.
Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).
Demolitioin of cement conc(reinforced) in ground floors and pavings n.exc 15cms thickness (below or above GL).
M&L for Hard core of broken stone gauge exc. 63mm but not exc 100mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed/rolled to a true surface complete all as specified.
M & L 75 mm thick Cement concrete type C2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and n exc 10 sqm on plan and getting out in soft and loose soil complete all as specified.
Excavation over areas, not exc 1.50m deep and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in hard/dense soil
M&L for removing surplus excavated (soil) material exc 1.50 Km but not exc 5.00km and depositing where directed.
M&L broken stone or boulders hand packing (any thickness) at back of walls over arches etc and raising/lowering to the required level complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for in any location and any position complete all as specified and directed.
Dismantiling timber scantling(framed) in fillets, rail, posts, rafter, purlins, etc under 40Sq.cm in section complete all as specified and directed.
Supply and fix mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.
S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails and framing(beam, tee, angle, channel or flat section)including distance pieces , cleats etc, complete all as specified and as directed.
M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, the like etc., complete all as specified and as directed.
M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in walls, retaining walls,drains; Parapet walls, basement walls, ballast walls and the like etc., complete all as specified and as directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, finished rough etc., complete all as specified and as directed.
Formwork to faces of walls, retaining walls, abutments, parapets and stair case railing and similar works incl attached pillaster, buttresses, vertical or batter, finished rough complete all as specified and as directed.
M&L TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.
M&L TMT bars Ditto, but 6mm to 8mm dia. cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.
Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for Stone kerb of roughly squared stones of size 15cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar1:6 and struck flush , complete, all as specified and directed.
Plain cement concrete (1:2:4), type B-2, using 40 mm graded crushed stone aggregate as in foundations, filling , mass concrete and sub base, complete, all as specified and directed.
S&F in repairs aluminium alloy solar cat eyes 125mm x 125mm x 25mm having high efficiency mono crystalline solar panel 2.4V/0.3 Watt fixed with 6 LEDs with 10000 to 18000 mcd (millicandela) with unbreakable poly carbonate clear facing, red blinker fitted on road with nails complete all as specified and directed.
S&F in repairs Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to bepainted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Note: The stainless steel shall be of SS 304 Gde.
S&F in repairs Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Note:- The stainless steel shall be of SS 304 Gde
Disconnecting and taking down unserviceable Service cable of any size from LT Pole to existing distribution board complete all as directed.
Dismentling of ACSR conductor sizes from Poles complete all as directed.Note : T&P for Srl item No 40 & 41 will be provided by the Contractor.No extra payment will be made for it.
Meterial and labour for dismantling reinceforced cement concrete pole /Iron poles/struts of any size and type including breaking of concrete cutting of mild bars of any size from below the ground level up to 60 cm depth and all items removing from site all as directed by Engr -In- Chrage Note :Excavation earth work included in this quoted rate
Removing excavated surplus (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
M&L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge.
Supply and laying dry river sand to be laid in 8 cms before laying of cable and 15 cms above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured
Supply and fixing in laying of GI pipe light grade 50 mm bore for cable protection fixed to pole/along wall/ under road/across nallah or drain including dismantling/taking out old unserviceale one complete all as directed.
All as per item No 46 above but size 40 mm dia
Supply, laying ,jointing and testing LT XLPE insulated cable screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross-sectional area 10 sq mm, 2 core making all incoming and out going connections through the lugs/thimbles after taking out of old unservicable under ground cable from trenches/road/alongwalls/ pipe/ poles complete all as specified and directed . Note :- Excavation & earth work shall be measured & paid separately under respective item of this schedule
All as per item No 48 above but size 16 sq mm 4 core
M&L in replacement cast iron LT cable route indicator of size 100mm dia round plate 2mm thick with stand of angle iron approx 75mm long duly embossed with LT/MES embedd in concrete block in PCC 1:2:4 complete all as specified and directed.
Supply and fixing in replacement of GI Pipe pole light grade 80 mm bore ( each pole 8 metre long) including making the holes on the pole (bottom and top) suitable size for drawing of wire 1.5 sqmm 3 core round flexible for connection of security light fitting from junction box to light fittings including one coat of aluminium paint including dismantling/taking out old unserviceale one all as specified and directed.
Supply & install steel tubular pole swaged welded with MS base plate size 30cm x 30cm x 6mm thick final taper plug bolts nuts & washers as per IS: 2713 (part-I) 1980 made out of MS tubing including painting of two coats of aluminium paint of approved quality over one coat of red oxide primer length 9.00 mtr long 410 SP -31 using for any description of external electric work incl taking out existing pole all as specified and directed by Engr-in-charge. NOTE : (i) Earth work and PCC work will be measured and paid separately under respective item of the schedule. (ii) Material and labour for ACSR conductor, cross arms, insulators will be measured and paid separately under respective item of the schedule.
Supply and fixing in replacement of 60 watt LED inverter RTC(street light with inbuilt RTC (Real Time clock) for Auto on/Auto Off. Housing made of Pressure die cast aluminium ,top maintainable and with clear heat resistant toughned glass , have secondary lens for better optics, should have LM80 certified LED of CREE,NICHIA, OSRAM,SEOUL make with constant current RTC enabled electronic driver with 5KV SPD,IP66. Street light shall have inbuilt Li-on battery of 5200mAH and shall have>1.5 hrs battery backup at inverter load in case of power failure,Efficacy > 100LPW,CRI>70,THD<10%,PF>0.95,cut off voltage at 300 Volt + 10% and suitable for 50mm mounting GI Pipe complete all as specified and directed.
Supply and fix in replacement of security light fitting bracket made up of 32 mm dia light grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flat clamps with nut bolts and washer etc all as directed.
Material and labour cutting road/path way (concrete) any type including excavation returning in spreading, leveling , well ramming in layers, soiling with stones, WBM 7.5 CM thick and laying premix carpet 25mm thick using ready mix patch mate material, including rolling and compection of path work complete all as directed.
Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.
Meterial and labour for cement concrete in foundations for pole coping or any other work type B0 1:2:4 with 12.5mm graded crushed stone aggregate all as directed
Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm graded crushed stone aggregate all as directed
Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.
Supply and fix in replacement of Junction box made out of thermo plastic material of size 240x130x110 mm with provision of single phase cable connector incomming and out going with MCB SP 6-32 amps for security light fitting/PTL IP 65 protection totally enclosed weather proof with cable entry along with GI clamps nut bolts & washer fixed on pole including dismantling/taking out old unserviceale one all as directed.
Material and labour in replacement for Sub main wiring with 2 run of 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit 15 mm dia with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connection from distribution board to light fittings including dismantling/taking out old unserviceale one complete all as directed.- Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoated rates.
Supply and fixing in replacement of cubical out door type feeder pillar box for housing DB etc, of size 450 mm x 300 mm x 600 mm made out of CRCA Sheet 3.2 mm thick, duly powder coated from inside and outside, dust, vermin and weather proof, having front openable door with cam locking arrangement, 2mm thick MS gland plate for cable entry provided at bottom, foamed-in PU gasket around doors & gland plates, earthing straps, complete panel fixed on 40 x 40 x 3 mm angle iron 04 leg frame duly grouted in PCC (1:2:4) (Each leg 50cm grouted in ground/floor and 40 cm above floor level) with inbuilt of Double door MCB DB SPN 8 way with MCB SPN 63 Amps - 01 No and MCB SP 6 to 32 Amps - 04 No’s including making electrical connection of incoming supply and all out going electric circuit,through proper lugs/thimbles complete all as directed.
Supply and fixing in replacement of cubical out door type feeder pillar box for housing DB etc, of size 450 mm x 300 mm x 600 mm made out of CRCA Sheet 3.2 mm thick, duly powder coated from inside and outside, dust, vermin and weather proof, having front openable door with cam locking arrangement, 2mm thick MS gland plate for cable entry provided at bottom, foamed-in PU gasket around doors & gland plates, earthing straps, complete panel fixed on 40mm x 40mm x 3 mm angle iron 04 leg frame duly grouted in PCC (1:2:4) (Each leg 50cm grouted in ground/floor and 40 cm above floor level) with inbuilt of Double door MCB DB SPN 04 way with MCB SPN 6 to 32 Amps - 01No and MCB SP 6 to 32 Amps - 02 No’s including making electrical connection of incoming supply and all out going electric circuit,through proper lugs/thimbles complete all as directed.
Supply and fixing of 60 watt LED inverter RTC(Flood light with inbuilt RTC (Real Time clock) for Auto on/Auto Off. Housing made of Pressure die cast aluminium ,top maintainable and with clear heat resistant toughned glass , have secondary lens for better optics, should have LM80 certified LED of CREE,NICHIA, OSRAM,SEOUL make only with constant current RTC enabled electronic driver with 5KV SPD,IP66. Flood light shall have inbuilt Li-on battery of 5200mAH and shall have>1.5 hrs battery backup at inverter load in case of power failure,Efficacy > 100LPW,CRI>70,THD<10%,PF>0.95,cut off voltage at 300 Volt + 10% and suitable for 50mm mounting GI Pipe complete all as specified and directed.
Supply and fixing in replacement of IP 65 protection LED bollard fitting 9 watts with electronic driver unit and lamp for landscape lighting having aluminium housing translucent diffuser tube polycorbonate, the colour of bollard is gray or silver and height of bollard 60 cm including mounting nut bolts PVC connecter incl monkey menace protection using steel spikes & barbed wire etc and taking down old unserviceable lights complete all as specified and directed.
Supply and fixing in replacement of Energy saving LED street light 120 watt luminaire with high power LEDs with lens of beam angle of 120 degree, luminaire made of pressure die cast aluminium body with built in heat sinks, painted with polyurethan / powder coated paint enclosed with toughened glass incl separate compartment for cable and driver for easy access, during maintenance, suitable for operating on voltage 120-270 volt AC, 50 HZ with driver of solid state covered with seperately fitted surge protection of 5 KV output luminous efficany not less than 100 Lumen / watt, conforming to IP 66 protection class 1 complete all as per manufacturers specifications including taking down old unsv fittings of any size / watt complete all as specified and directed.
S & F in replacement of Energy saving LED street light 70 to 75 watt luminaire with high power LEDs with lens of beam angle of 120 degree, luminaire made of pressure die cast aluminium body with built in heat sinks, painted with polyurethan / powder coated paint enclosed with toughened glass incl separate compartment for cable and driver for easy access, during maintenance, suitable for operating on voltage 120-270 volt AC, 50 HZ with driver of solid state covered with seperately fitted surge protection of 5 KV output luminous efficany not less than 100 Lumen / watt, conforming to IP 66 protection class 1 complete all as per manufacturers specifications including taking down old unsv fittings of any size / watt complete all as specified and directed.
Suply and fix of Porcelain Rewireable Kit Kat fuze of capacity 63 Amps to 400 Amps complete all as directed.
Supply and fix Astronomical time switch/Astro timer ( Rev-302) brand Novatek Electro(Having longitude and latitude of Indian cities in memory) 250 volts single phase of 20 Amp rating with contactor 63 Amps, MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA fitted inside the steel enclosure including of one primer coat, one under coat and one finishing coat of synthetic enamelled paint incl taking out unserviceable timer panel complete all as specified and as directed.
Supply and fix LED aviation obstruction light aluminium housing with poly corbonate enclosure with internally prewired electronic driver unit and necessary mounting pipe of 20 mm dia medium grade pipe of 1.2 mtr length with mounting nut bolts/clamps and provision to fix two lights all as directed.
Material and Labour for Aluminium thimbles/lugs for connections of 50 Sqmm size of under ground heavy duty cable all as specified and directed.
All as per item no 72 but size 70 Sqmm
All as per item no 72 but size 95 Sqmm
All as per item no 72 but size 120 Sqmm
All as per item no 72 but size 150 Sqmm
All as per item no 72 but size 185 Sqmm
All as per item no 72 but Copper thimbles/lugs for connections of 95 Sqmm under ground heavy duty cable all as specified and directed.
Bairagi Builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .