CONSTRUCTION OF BOYS HOSTEL FOR UNDERGRADUATE STUDENTS AT SDAU,S.K.NAGAR

Name of Work :- CONSTRUCTION OF BOYS HOSTEL FOR UNDERGRADUATE

STUDENTS AT SDAU,S.K.NAGAR.

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up

1 0.23 to 300 mm removal of stumps of trees cut earlier and 106992.26 Hectare

disposal of unserviceable materials(D) By mechanical

means in area of thorny jungle

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

2 980.23 off the excavated stuff upto 50 Meter lead.(B) Dense or 157.16 cu.m

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

3 294.72 disposing off the excavated stuff upto 50 Meter lead.(B) 170.50 cu.m

Dense or Hard soil

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

4 902.74 exceeding 20 cm. in depth consolidating each disposited 136.92 cu.m

layer by ramming and watering.

Filling in foundation and plinth with murrum or selected

5 483.00 soil in layers of 20cm. thickness including watering, 282.07 cu.m

ramming and consolidating etc. complete.

Fillingin plinth with sand under floors including watering

6 1.38 reamming, consolidating and dressing etc. comp. 444.75 cu.m

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

7 1706.00 Weight one percent is recommended i.e one litre 20 EC 80.84 sqmt

chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the

rate of 5 Litre chemical / Sqm of surface is recommended

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

8 67.79 size) and curing complete Including cost of formwork in 3638.79 cu.m

(A) Foundation and Plinth

Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- hand broken stone aggregates

9 132.01 mmnominal size) and curing complete including cost of 2978.97 cu.m

formwork in (A) Foundation and Plinth

Providing TMT Bar FE 500D reinforcement for R.C.C. work

10 112809.23 including bending, binding and placing in position 77.29 kg

complete upto floor two level

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

FOOTING RCC- Providing and laying controlled cement

concrete M.20 and curing complete including the cost of

11 209.91 formwork and excluding reinforcement for reinforced 4699.36 cu.m

concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.

G.B/TB/PB RCC WORK - Providing and laying controlled

cement concrete M.20 and curing complete excluding

reinforcement for reinforced concrete work including

Providing formwork of ordinary timber planking so as to

give a rough finish including centring shuttering strutting

12 94.51 and propping etc. height of propping and centring below 5757.26 cu.m

supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and

plain concrete work in. ground Beams, plinth beam

WALL RCC - Providing and laying controlled cement

concrete M.200 and curing complete Including the cost of

13 12.42 formwork and reinforcement for reinforced concrete 6660.67 cu.m

work in (B) Walls, from top of foundation level upto all

floor three level

COLUMNS RCC WORK - Providing and laying controlled

cement concrete M.200 and curing complete excluding

reinforcement for reinforced concrete work including

Providing formwork of ordinary timber planking so as to

give a rough finish including centring shuttering strutting

and propping etc. height of propping and centring below

14 77.35 supporting floor to ceiling not exceeding 4 M. and 5976.05 cu.m

removal of the same for in situ reinforced concrete and

plain concrete work in. (G) Columns Pillars/Posts and

/square/rectanglular /circular/polygonal in shape and up

to all floor level.

BEAM RCC WORK - Providing and laying controlled

cement concrete M.200 and curing complete excluding

reinforcement for reinforced concrete work including

Providing formwork of ordinary timber planking so as to

give a rough finish including centring shuttering strutting

15 162.36 and propping etc. height of propping and centring below 4557.50 cu.m

supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and

plain concrete work in. Beams up to floor two level.

SLAB RCC WORK - Providing and laying controlled cement

concrete M.200 and curing complete excluding

reinforcement for reinforced concrete work including

Providing formwork of ordinary timber planking so as to

give a rough finish including centring shuttering strutting

16 343.85 and propping etc. height of propping and centring below 6403.41 cu.m

supporting floor to ceiling not exceeding 4 M. and

removal of the same for in situ reinforced concrete and

plain concrete work in. Slabs,landing,shelves,Balconies

up to floor two level.

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

CHAJJA, lintle,shelves RCC WORK- Providing and laying

controlled cement concrete M.200 and curing complete

excluding reinforcement for reinforced concrete work

including Providing formwork of ordinary timber planking

so as to give a rough finish including centring shuttering

17 28.73 strutting and propping etc. height of propping and 6158.34 cu.m

centring below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced

concrete and plain concrete work in. ,shelves, Lintels,

and Cantilever up to floor two level.

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm

18 9.06 nominal size) and curing complete including cost of 3976.71 cu.m

formwork in (A) for column @ terrace level.

Providing and laying controlled cement concrete M.200

and curing complete including the cost of formwork and

19 9.65 excluding reinforcement for reinforced concrete work in 6696.33 cu.m

(E) Staircases including landing upto all floor level

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

20 42.55 foundation and plinth in Cement Mortar 1:6 (1- Cement : 4090.06 cu.m

6 -fine sand)(C) Fly Ash Bricks

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

21 677.33 Superstructure in Cement Mortar 1:5. (1- Cement : 5 -fine 4526.81 cu.m

sand)(B) Conventional For all floor lvl.

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with

22 377.66 Nos of 6mm Mild steel round bars after every three 696.33 SQ.MT

course embedded in Superstructure Cement Mortar in

(B)Conventional For all floor lvl.

Providing and fixing 32mm thick fully paneled shutter for

door including 30 mm thick water proof flush door of

CENTURY or GREENLAM make & with 1.00 mm laminated

sheet on both side of GREENPLY OR DURIAN and with

23 128.52 necessary teak wood beading of 12 mm thick & YAMA or I- 3354.92 SQ.MT

Twenty make s.s. fixtures & fastening with brass screws

including two coats of varnish and etc complete With

350mm haldrap and 200mm towelbolt as directed by

Engineer in charge

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and fixing 30mm thick FACTORY MADE SOLID

BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge

thickness and size of 19mm x 19mm for stiles, top and

bottom rails. M.S. frame shall have a coat of steel primer

of approved makde and manufactures. M.S frame

covered with 5mm thick heat moulded prelim PVC ‘C’

channel of siz 30mm thickness, 70 mm width of which

50mm shall be flat and 20mm shall be tapered in

degree Angle on either side forming stiles, and 5mm

thick, 95mm wide pream PVC sheet out of which 75mm

shall be flat and 20mm shall be tapered in 45 degree on

the inner side ot form top and bottom rail and 115mm

wide prelim PVc sheet out of which 75nmm shall be flat

24 110.25 and 20mm shall be tapered on both side to form lock rail, 2236.14 SQ.MT

Top, bottom and lock rails shall be provided either side of

the panel. 10mm (5mm x 2) thick 20mm wide cross PVC

sheet shall be provided as gap insert for top rail and

bottom rails. Panelling of 5mm thck both side prelim PVC

sheet to be fitted in the M.S. frame welded,sealed to the

stiles and rails with 7mm (5mm + 2 mm) thick x 15mm

wide PVC sheet beading on inner side, and joined togeth

with solvent cement adhesive. An additional 5mm thick

PVC strip of 20mm width is to be stuck on the interior

side of the ‘C” chanel using PVC solvent adhesive etc.

complete as per direction of Engineering in charge,

manufacture’s specification and rawing.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding

25 257.04 shutters of horizontal member size 40 mmx18mm 1583.95 SQ.MT

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with

mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

26 8.64 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 1713.70 SQMT

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and fixing fully glazed anodize aluminum fix

type glazing frame section of size95mm x 24mm x

63.5x38.10mm(20047).of Zindal or equivalent and fixing

27 94.47 with panel ‘Assai’ or equivalent make 6mm thick plain 1525.00 SQMT

glass. glass fixed with glazing clip, angle cleat, nylon

rubber packing, of approved quality, necy. Screw, grip

etc. comp.as directed by Engineer in charge.

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg /

Rmtwith colour anodized lluminium frame with 5 mm

28 22.08 thick transparent bronze colour tinted float glass with 1301.82 SQMT

colour anodized alluminium frame for ventilation with

mm thick frosted glass as details etc complete for.window

Providing and fixing M.S. plain grill with M.S. flats, square

bar, round bar, etc. in required size and spacing in

wooden frames of windows and ventilators,as per

29 534.60 detailed drawing & design including one coat of primer 70.50 Kg

and two coat of enamel oil paints of approved quality

brand and shade etc complete as directed by E.I.C.

P/F in position collapsible steel shutter with vertical

channel 20x20mm braced with flat iron diagonal 20x5mm

size with top and bottom rail of T-iron 40x40x6mm with

bolt, nut, washer, locking arrangement, stopper, handle

30 330.00 including a coat of red oxide primer and two coat of 61.20 kg

enamel oil paints of approved quality brand and shade

etc complete as directed by E.I.C.

Providing and laying polished Kota stone slab flooring and

skarting over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

31 134.80 Lime putty :1.5 - coarse sand) laid over and jointed with 1018.88 SQMT

grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

P & L 600x600 or more size vitrified 10 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6

( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

32 2190.90 dismentaling of existing flooring and jointed with color 1027.17 SQMT

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade

Providing and laying Vitrified tiles 8 to 10 mm thick

600x600 or more size in skrting risers of steps and dedo

33 202.70 on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 1195.02 SQMT

sand) and jointed with white cement slurry

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and laying coloured glazed tiles of the size

mm x 600 mm x 8/300 mm x 450 mm x 8 mm in skirting,

34 838.74 risers of steps and dedo on with10 mm. thick cement 1000.51 SQMT

plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry..

Providing & fixing grainite average 18 mm thick machine-

cut & machined polished stone in treads of steps, sill,

copings, parapet top, URINAL partitions, window sill,

planter top, nd such other locations, laid on

mm(average) thick cement mortar 1:4 (1 cement:4coarse

sand) and jointed with Supar flex guranted fixing solution

by kerakoll mixed OR Five star of Rakshak with pigment to

35 272.73 match the shades of the slabs, including rubbing and 1919.00 SQMT

polishing complete. The Stone used should be in one

single long piece up to 1500 mm as per drawing or as

directed by Engineer-in-charge. The exposed projected

edges shall be of uniform thickness and of uniform

projection including moulding , chamfering, rounding,

polishing complete. (Basic rate of granaite should be

Providing & fixing 30 mm thick and 275mm width

machined polished GRAINITE stonemolded door frame of

inner trip 75mm X10mm wide and outer trip 200mm X

30mm wide jointed with Supar flex guranted fixing

solution by kerakoll mixed OR Five star of Rakshak with

pigment to match the shades of the slabs, including

36 369.20 rubbing and polishing complete. The Stone used should 666.60 RMT

be in one single long piece as per drawing or as directed

by Engineer-in-charge. The exposed projected edges shall

be of uniform thickness and of uniform projection

including moulding , chamfering, rounding, polishing

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and

37 330.00 as per approved design Confirming to IS 15658 : 2006 701.90 SQMT

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as per approved

38 70.00 design and including excavation for fixing in proper line 374.92 RMT

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Providing and laying broken chinemosaic flooring using

brickbats 25to100mm size with 50% of C.M.1:4(

1cement:5coarsesand) admixed with waterproofing

compound for terrace using 12mm to 20mm broken

pieces of glazed tiles tobe laid over cement mortar 1:3 to

39 1450.00 plain or slope and to be tempered to bring mortar creme 666.60 SQMT

out upto surface using white cement including rounding

off junctions and xtending them upt o15cm a long the

wall, Clearing with water and oxalic acid etc. as directed

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and fixing sandwiched granite and kotaas

Kitchen platform, pantry, Basin counteretc. 20mm thick

granite of approved color+30mm C min 1:4 +20mm kotah

40 14.05 stoneone side polished in one piece for kitchen/ 3333.00 SQMT

platform. The joint shall be filled with grout chemical

measure ment should be cal. of top surface only.

Providing and applying 15mm thick smooth cement

plaster in single coat on brick/concrete wall for

interior/exterior plastering for ground floor up to floor

two level in true line and level in C.M. 1:4 ( 1 cement :

coarse sand ) including finishing even and smooth with

floating coat of neat cement slurry including scaffolding

curing etc complete as directed by Engineer in-charge

Providing and Applying 20 mm. thick sand faced Cement

Plaster on wall surface at any height above ground level

consisting of 12 mm. thick backing coat of C.M. 1:3 (1

42 2830.08 Cement: 3 Sand) and 8 mm. thick finishing coat of C.M. 283.95 SQMT

1:1 (1 Cement: 1 Sand) in true line level including cost of

scaffolding curing etc complete As directed by E.I.C.

Providing 10 mm thick cement plaster by using Cement

mortar 1:4 (1 Cement : 4 sand) for plaster in single coat

43 3696.80 on brick/ concrete walls for interior plastering upto floor 117.11 SQMT

two level and finished even and smooth in Cement

mortar 1:4 (1 Cement : 4 sand)

Providing and Applying Exposed brick texture with groove

pattern with grey base coat and finished with antifungul

44 732.00 chemical incl.cost of labour ,scaffolding ,colour wash etc. 919.10 SQMT

as directed by department and sample approve by

architect complete.

Providing cement vata (10cm. x 10 cm. size) quarter

45 81.60 round in cement mortar 1:1 including neat cement 24.28 RMT

finishing, watering etc. complete.

Providing composite waterproofing treatment to floor

and walls of watertank ,w.c. bath area, through approved

agencies preparing floor and wall for waterproofing

work/ bychasing/ cutting as erthe companies

requirement. First by providin gand applying

46 140.00 cementitious crystalline based waterproofing for 676.70 SQMT

concrete rafts, walls, watertanks, slabs, concrete floors

etc. with krystolT2 or quivalent system. Cementitious

based dry Krystol T2Crystalline powder capable of

creating Crystalstoseal the pores, inter cises and micro

cracks in the concrete.

Providing & Applying acrylic Plastic paits (two coats) of

approved brand & manufacture and of required shade on

Ceiling surface to apply one coat of putty and primer to

give an even and smooth on wall surface including

47 8060.36 repairing of patch with plaster of Paris after thoroughly 83.18 SQMT

brushing the surface free from mortar drops and other

foreign matter and also incl. preparing the surface even &

smoothed, complete as directed by Engineer in-charge.

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

48 2830.08 even shade after thoroughly brushing the surface to 73.83 SQMT

remove all dirt, and remains of loose powdered

materials.etc complete

Providing and fabricating and fixing square M.S. pipe for

the railing, in parapet, stair , terrace etc including

fabricating, hoisting fixing in position with angle cleats etc

in RCC or masonry etc. including applying one coat of rd

49 3385.80 oxide primer paint and two coats synthetic enamel oil 76.76 kg

paint of approved quality and shade enamel paint,

including scaffolding etc complete as directed by

Engineer in charge.

Providing & filling in sunk slab with ‘Cinder’ including

50 25.30 ramming , consolidating etc complete as directed by 838.30 CUMT

Engineer in charge .

P/F HDPE sintex double wall construction one piece

molded cylindrical vertical with close top lead pvc water

storage tank of required capacity on any floor of

approved brand sintex incl. providing fixing 40mm dia g.i.

51 4000.00 pipe connection for inlet out let washout etc comp. as 3.95 lit

directed by eng in charge incl . providing and laying

necessary brick masonry platform with plaster to put pvc

tank etc. com. as per architect instruction and drawing or

as directed by engineer in charge.

providing and fixing 24 gauge - GI chicken wire mesh

(PLASTER MESH OF AMAX INTERNATIONAL) at the

junction of masonry work and RCC work or on any other

52 166.00 place as directed to receive plaster including fixing with 225.23 SQMT

galvanized nails, raw plugs at all heights plinth level-

including scaffolding etc complete as directed.

Providing and laying 40 mm average thick IPS flooring

with under layer of 38 mm thick cement concrete 1:2:4

(1 part cement, 2 part coarse sand and 4 part stone

aggregate 12.5 mm and downgraded) finished smooth

with top layer of 12 mm thick mortar in CM 1:2 (1 part

53 110.00 cement : 2 part coarse sand) and cement slurry @ 2.2 kg / 298.99 SQMT

Sq.M including rubbing / grinding the top surface to

match, including rounding off the junction and corners

with floors and walls, necessary construction joints,

finishing the top surface smooth / chequered or broom,

curing etc. complete as directed.

providing and fixing (A) whie glazed vitreous chinaware

Orissa pan (Indian type) (ruby orissapan) Johnson make

type water closet inlet connection with integral P or S

trap including cutting and making good the wall and floor

54 12.00 as under with supported on CI wall brackets and (B) 992.15 EACH

flush cock etc. complete to the satisfaction of EIC or or

as directed by architect (parreywere , asian,Shimpolo,

jaquar, cera or eqvivalante make)

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

providing and fixing (A) white glazed vitreous chinaware

European type water closet with integral P or S trap with

seat cover with , CI chair bracket with 12mm rag bolt nut

and metal washer etc. including supply and fixing of (B)

no CP heavy duty angle cock with CP wall flange with CP

55 26.00 brass inlet connection pipe of required size including 1356.81 EACH

cutting and making good the wall and floor as under with

supported on CI wall brackets etc. complete to the

satisfaction of EIC or as directed by architect (

parreywere ,asian,Shimpolo, jaquar, cera or eqvivalante

Providing & fixing white color Under counter vitreous

China "Washbasin" of Size 600mmX400mmx150mm with

single hole for pillar tap including cutting hole sand

56 23.00 making good the same, including 32mmdia C.P.brass 1530.97 EACH

waste (parreywere ,asian,Shimpolo, jaquar, cera or

eqvivalante make)

Providing and fixing Kitchen sink with C.I. or M.S.

brackets,painted white including cutting holes in walls

57 1.00 and making good the same but excluding fittings. (C) S.S. 2326.66 EACH

304 Grade Sink.(i) 600mm x 450mm x 150mm size

providing and fixing screw down brass chromium plated

heavy quality two way bib-tap of asian make on water

supply pipe lines of 15mm dia with or with extension

58 26.00 piece but with a flange etc. complete to the satisfaction 686.80 EACH

of EIC. ( asian, jaquar, cera or eqvivalante make)

providing and fixing best Indian make mirror of specified

size 600mm x 450mm like modi float, saint gobain, i.a.g

or equivalent silvered locally, with plain edge as required,

with 12mm thick marine plywood backing, with cp brass

59 23.00 caps, etc., complete teakwood beading of 20mm x 32mm 859.41 EACH

size, with French polish or 3 coast of paint etc. complete

to the satisfaction of eic or as directed by architect

Providing and fixing C.P. brass towel rail comlete with C.P.

brass brackets fixed to wooden plugs with C.P. brass

60 38.00 scews.(B) 600mm x 20mm size. complete to the 616.42 EACH

satisfaction of eic. or as directed by architect

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

61 22.00 pipe.(A) Squating plate pattern white earthenware 1630.20 EACH

550mm x 300mm. (parreywere , asian,Shimpolo, jaquar,

cera or eqvivalante make)

Providing and fixing screw down bib taps of following

62 72.00 size.(B) Brass chromium plated screws down Bib Tap. (i) 186.83 EACH

15mm dia.( asian, jaquar, cera or eqvivalante make)

Providing and fixing brass screw down stop tap.(C) 25mm

63 15.00 dia. ( asian, jaquar, cera or eqvivalante make) 220.82 EACH

Providing and fixing Gun metal check or non-return

64 2.00 fullway wheel valve.(C) 25mm dia. ( asian, jaquar, cera or 420.63 EACH

eqvivalante make)

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and fixing Gun metal check or non-return

65 4.00 fullway wheel valve.(E) 40mm dia.( asian, jaquar, cera or 663.43 EACH

eqvivalante make)

Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

66 38.00 complete.(ii) 25mm dia. ( asian, jaquar, cera or 263.77 EACH

eqvivalante make)

Providing and fixing ball cock of approved. quality as

67 2.00 directed.(A) Copper Metal (i) 25mm dia. 132.89 EACH

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

68 30.00 nominal bore tube fittings and clamps including making 253.82 RMT

good the wall, ceiling and floor etc. complete. [C] 25 mm.

(astral, ashirwad, supreem or eqvivelant)

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

69 55.00 metre C/C or shall be concealed as directed including 72.65 RMT

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.(astral, ashirwad, supreem or eqvivelant)

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

70 110.00 metre C/C or shall be concealed as directed including 91.84 RMT

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.(astral, ashirwad, supreem or eqvivelant)

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

71 60.00 metre C/C or shall be concealed as directed including 148.12 RMT

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.(astral, ashirwad, supreem or eqvivelant)

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I scread

72 72.00 down or hinged grating including the cost of cutting and 733.26 EACH

making good the walls.(astral, ashirwad, supreem or

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

73 8.00 300mm x 300mm size (inside) with standard weight.(i) 1292.19 EACH

Square mouth traps. (A) 100mm x 100mm size P type.

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing laying (to level or slopes) and jointing

reinforced concrete Light duty non-pressure pipes I.S.

74 24.00 class NP2 of the following internal diameter with collars 359.80 RMT

and butt ends prepared for collar joints including testing

of joints complete.(C) 250mm

Constructing Brick masonry road gully chamber 500mm x

75 4.00 450mm x 600mm including 500mm x 450mm C.I. 2017.19 EACH

horizontal grating wih frame complete.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

76 2.00 coarse sand :4-graded stone 2932.93 EACH

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

Providing and constructing SOAKWELL OF 2.5 Minternal

dia and 5.00m depth internal clear dimension including

the cost of excavation, foundation for honey comb

mnasonry of 3mheight in CM 1:6 cast ing RCC 1:2:4

topslab 12 thick with CI Manhole cover 60cmx45cm size

77 1.00 of 35kg weight and 75mm dia CIpipe 1.8m long with 47167.00 EACH

75mm dia cowl vent and filling the wall 1min depth with

dry bricksbats including providing vatain CM 1:3 curing

including cost of reinforcement etc complete as directed

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge

78 40.00 compression type fittings, wall clipsetc. including making 175.39 RMT

good the wall ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the following

outside Dia. Low densidy, complete with special falnge

79 80.00 compression type fittings, wall clipsetc. including making 280.23 RMT

good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge

80 80.00 compression type fittings, wall clipsetc. including making 339.05 RMT

good the wall ceiling and floor.(G)110 mm

Providing and fixing in position cowel went to pipes.(B)

81 3.00 75mm dia. 393.04 EACH

Providing and fixing in position cowel went to pipes.(C)

82 3.00 100mm dia 505.17 EACH

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Providing and constructing BB masonry and cement

concrete for SEPTICTANK OF 3mx0.9mx1.5m depth

internal dimension with excavation and depositing of the

excavated stuffa sand where directed including providing

laying brick masonry in CM 1:6 with using common burnt

clay conventional building bricks having crushing strength

not less than 35kg/sqm for necessary compartment for

83 2.00 chamber sand septictank with necessary inl et and out let 31310.17 EACH

with cement plaster 15mm thick on wall, IPS flooring bed

concrete ,RCC top slab, MHcover 600mmx450mm of

CIairvent pipe with cowl vent and cement vatta of

10cmx10cm in CM 1:1 etc complete as directed by EIC...

Providing and Fixing of single Bed, the Bed size is 900mm

x 1950mm x 430mm Bed -basic structure made from M.S.

84 180.00 with powder coated and top with wooden material -Solid 6969.00 EACH

wood type and Bed ply thickness 19mm. The coating

process in pu leather sheet with pu form . Color is as per

architect instruction.

BED SIDE TABLE –

Providing and fixing of BED SIDE table of size

85 180.00 x450x500 mm make from m.s. structure with siingle 2222.00 EACH

drawer complte wiith powder coating complete as per

architect drawing and instuctiion.

Providing and fixing 25 mm thick shutters for cupboards

etc. including S.S. butt hinges with necessary screws. (A)

86 283.50 25MM ply woodwith both side laminated (i) Fully 1282.70 EACH

Study table Providiing and fixing study table of size

87 180.00 900x550x750 base from ms framing and top wooden with 6666.00 EACH

1mm laminate complete as per architect drawing and

Dining Table With 6 seat

Providing and Fixing of dining table, make from s.s.

of size 1550x900x750 mm size top with six seats make

88 11.00 from s.s pipe and top wth solid teak wood of size 350mm 15453.00 EACH

dia wiith pu polish compllete . Six seats are fixed with

dinning table complete as per architect drawing and

Providing and supplying four leged medium curved back

and seat with 50mm PU molded cushion foam with pu

89 180.00 leather finish of size 450x450x780 Selection of chair 1919.00 EACH

should be as approved by engineer in - charge and

consultant.(wood 360, geeken make)

Providing and fixing of Fire Extinguisher 6 Kg.

Providing and fixing of 4.5kg. Co2 Type Fire Extinguisher

QTY. ITEM DESCRIPTION RATE UNIT AMOUNT

Dismantling Work – Boy’s Hostel Building

Providing and carrying out complete dismantling of the

existing Boy’s Hostel building having an approximate built-

up area of 850 Sq.m, including all R.C.C. work, brick

masonry, doors and windows, sanitary installations,

plumbing lines, and electrical installations, etc.

The work shall include careful dismantling, stacking of

serviceable materials at site as directed, and disposal of

92 1.00 unserviceable materials outside the premises with all lead -257550.00 job -257550.00

and lift, complete in all respects.

The credit value of salvaged materials shall be deducted

and credited to the SDAU account as directed by the

Engineer-in-Charge.