Providing LWSS to Tardali Seosi in GP Sali in Tehsil Balh Distt. Mandi

Amount

Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/ strutting, planking, timbering wherever required, stacking the useable of unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying jointing testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge.

Laying, jointing, testing and carriage of GI flanged pipes of following diameter, conforming to IS:1239-1990 ( Part-II) having minimum wall thickness and class of pipes specified below capable to withstand the required hydraulic test pressure as per IS code in a random length of 4 to 6 mtrs with bevelled ends and jointed with flange table mentioned below confirming to tables as specified below of BIS 6392-1971 (latest with upto date ammendments), the welding of flanges to be doneon both faces in double layer to make the joints leakproof according to relevant BIS standards and detailed specifications complete, with nut & bolts of required sizes, 3mm thick compressed asbestos fiber jointing gasket or synthetic rubber gasket confirming to relevant BIS codes, laying will include all operations such as all kinds of flanged short pieces, bends, tees & other specials etc made from parent tubes & provided and welded with flanges of tables as applicable for the particular reach as per site conditions, including flushing,cleaning & hydraulic testing of pipe complete in all respects with in all leads & lifts as per directions and entire satisfaction of the Engineer in Charge.

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Laying, Jointing, testing and carriage in trenches to be leveled to grades, IS marked GI pipes (Medium Grade) of following diameters conforming to IS 1239-1991 (Part II) (latest with up to date amendments) including Butt welding at both the ends to make water tight joint carriage of material upto all leads and lifts this work also includes fabrication of short pieces and bends, tees & other specials etc. from made from parent tubes with butt welding in three layers as per applicable for the particular reach & of technical specifications as per site of conditions including flushing, cleaning Hydraulic testing complete to the best satisfaction of Engineer in charge. The laying of pipe shall conform to IS; 5822-1994 and as per CPHEEO manual. The rates also include the carriage of GMS tubes from the JSV Divisional store Baggi to the site of work , butt welding of parent tube, fabrication of short pieces, bends, tees & other specials etc. From parent tubes, flushing , cleaning & hydraulic testing complete in all respects with in all leads & lifts as per directions and entire satisfaction of the Engineer in Charge. (Earth work to be measured and paid separately).

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing, supplying and fixing of Cast Iron Sluice Valve of following dia of Leader/ Kirloskar/ Kilburn/ PELICAN make PN-1.6 with Flange table-17, with nut, bolts & gasket including complete process of opening of existing valve and fixing new valve including carriage of material complete in all respect with in all leads & lifts as per the entire satisfaction of the Engineer-in-Charge.

50 mm dia

65 mm dia

80 mm dia

Ankit kumar (BID ID -508283)

Mohd sohel (BID ID -508286)