Construction of Staff Qtr at Tarava Colony A/S under Gumma Block

Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 23cm x 11 cm x 8 cm in Superstructure having crushing strength not less than 75 kg per square c.m, with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cuffing, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance.stacking. loading, uriloading, royalties, all taxes cost of all labour Labour cess scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. 1st Floor

Providing and laying in position ready mixed M20 grade concrete having compressive strength at 28 days test not lessthan 250kg/sq.cm for reinforced cement concrete work using cement content as per approved design mix etc including Rigid & smooth centering and shuttering. RCC Plinth /Grade Beam First Floor

RCC Coloumn First Floor

RCC Beam First Floor

RCC Stair Case

RCC Lintel First Floor

RCC Chajja First Floor

RCC Roof Slab First Floor

Supplying HYSD/Tor steel reinforcement from SAIL,VIZAG STEEL OR TATA STEEL brand of required diameter of approved quality including Labour charges for cutting, bending, binding and tying the grills and placing in position including cost, conveyance & taxes of reinforcements confirming to ISI standard and binding wire 18 to 20 gauge and as per drawing, design etc. complete as per the direction of Engineer-in-Charge. First Floor

12 mm thick cement plaster (1:6) over brick work including racking out joints finishing smooth with proper plumb and line watering curing for seven days with cost, conveyance, royality taxes of all materials, labour, T & P required for the work etc. Complete as per the direction of Engineer-in-Charge. First Floor

16 mm thick cement plaster (1:6) over brick work including racking out joints finishing smooth with proper plumb and line watering curing for seven days with cost, conveyance, royality taxes of all materials, labour, T & P required for the work etc. Complete as per the direction of Engineer-in-Charge. First Floor

6 mm thick Cement Plaster with cement mortar (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. First Floor

2.5cm thick grading concrete (1:2:2) on roof slab with hard black broken granite stone chips of approved size and quality from approved quarry with chicken mass including cost and conveyance taxes and royalties of all material with all labour and T&P etc compt and as per specification and direction of Engineer -in –charge. First Floor

Providing and fixing Granite tiles in floors, treads or steps and landing on 25 mm thick bed of CM(1:1) [1 cment: 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. First Floor

Providing and fixing Ceramic tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [1 cment: 1 sand] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. First Floor

Providing and fixing Ceramic tiles in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished.

Providing fitting & fixing of Vetrified tiles in floor treads or steps and landing on 20 mm thick bed of CM(1:4) [1 cment: 4 course sand] and filling with white cement of approved quality mixing with colour matching to tiles including cost of all and complete finished

Fixing Vitrified tiles in Dados skirting and riser of steps on 12mm thick bed of cement plaster (1:3) jointed with neat cement slury mix with pigments to match the shade of the tiles including rubbing and polishing etc complete

Finishing wall surface with wall putty (water base) of appvd quality and make and finished smooth even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour with T&P etc complete in all respect.

Finishing plastered surfaces of walls with wall primer and making smooth to receive painting including cost of all and complate. First Floor

Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of all and complete. First Floor

Finishing walls with Plastic Emulsion paint of approved shade on new work two coats over a coat of primer to give an even shade including cost of all and complete. First Floor

Supplying and fitting fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) Three track Three panel Sliding Window including cost of all and completeas per the directon of the Engineer-in-Charge. First Floor

Supplying 5mm thick Black glass of approved quality and make to the work site including cost of material with transportation and all taxes First Floor

Supplying, fitting and fixing M.S. Grill /Doors/Windows out of M.S. flat confirming to IS-1977/1996 as per the design approved. @35kg/sqm etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge. First Floor

Supplying, fitting and fixing M.S. Grill Gate /Doors/Windows out of M.S. flat confirming to IS-1977/1996 as per the design approved. @35kg/sqm etc including cost,conveyance of all materials,priming and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge. First Floor

Painting Two coats with synthetic Enamil paint over a coat of primer to Iron work including cost, conveyance and taxes of all materials and labour with T&P etc.complete as per directions of E.I.C. First Floor

Providing fixing and fitting of 100mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall First Floor

Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing,polishing etc. with cost conveyance taxes of all materials, labour, T&P required for completion of the work in all reapect as per the direction of the Engineer-in-charge. First Floor