Construction of Community Hall at Daju Bung, Upper Subansiri District, Arunachal Pradesh

Amount

Earth Work inexcavation piller

Hard core 63mm stone aggregates : Stone aggregates shall be crushed stone not exceeding 63mm graded confirming to IS-383-1970 & shall be clean hard tough, durable and of uniform quality throughout, the aggregated shall be free from soft disintegrated material, vegetable & other organic impuritis.

Providing and laying cement concrete 1:3:6 excuding the cost of centring and shuttring

Providing and laying reinforced concrete work in foundation for footing base , M20 (1 cement:1.5 coarse sand: 3 stone aggregate 20mm nominla size)

Providing and laying reinforced concrete work in columns, M20 (1 cement:1.5 coarse sand: 3 stone aggregate 20mm nominla size)

Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength og 550 mpa as in roof covering including ridges/ cladding to wall, foxed with self tapping screw as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforminng to I.S.1161-1979 grade St-240 complete all as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforminng to I.S.1161-1979 grade St-240 complete all as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforminng to I.S.1161-1979 grade St-240 complete all as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforminng to I.S.1161-1979 grade St-240 complete all as directed.

Coloured powder coated (50micron) aluminium window and vebtilator shutters side hung type without sash bar, aliminium sections weighing 0.55 kh/m including necessary joining cleats. Glazing clips, rubber packing, anodised aluminium fitings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

Centering and shuttering form work to sides of concrete foundations, footings, bases of coloums, raft and raft beams, sides and soffits of foundation and plinth beams and similer work, verticle or to better.

6mm thick ply wood for celing with wooden battern including paint.

Provision for best available local wood (class B-II) work in frame for floor beam, door frame, window frame, tile , rafter K/post,strutt, purlinne, ceiling frame .

2nd class HW shutters 18mm thick, plain framed paneled shutter factory made (two palel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003 complete all as specified and directed

Prefeb panel for wall of thichness 62 mm : Cement fiber wall : a. The main and partition walls. Providing and fixing 75mm thick walls non asbestos fiber reinforced aerated cement/concrete core composed of portland cement, flyash, binders etc, and 5mm thick non asbestos Fiber cement boards confirming to IS 14862-2000 and ISO:8336:1993(E) on either side of the core, having a tongue and groove on longitudinal side of the modules.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) area of each tiles exc 0.36 but n exc 0.42 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified.

M & L for red oxide primer on steel surface.

M & L painting coat with 2 two coats synthetic enamel paint to steel surface of any discription over 10cm width of girth on untreated steel surface.

Misc Items ( Welding rod, hindges, screws and other hardware)

Transportation

Labour charge

1 sqm mm Coper wire as per IS 694 (2010)

6 Amp ISI Marked Modular Switch

6 Amp ISI Marked socket, electric resistance 100 A, maximum current 6:00 AM, maximum Voltage 230 V

30 watt LED light (hall)With an impressive efficacy of 100lm/W, this LED batten provides bright and energy-efficient lighting, lasting up to 25,000 hours.

30 watt LED light (Verandha)With an impressive efficacy of 100lm/W, this LED batten provides bright and energy-efficient lighting, lasting up to 25,000 hours.

Cashing ,Material PP with cover

The Best Interiors (BID ID -3153078)

Eastern Mechnotech Engineering Services Pvt Ltd (BID ID -3153317)