LIGHTING WORK AT POLYTECHNIC COLLEGE RAILWAY CROSSING TO BEDI PORT JUNCTION UNDER SJMMSVY

NAME OF WORK :- LIGHTING WORK AT POLYTECHNIC COLLEGE RAILWAY CROSSING to BEDI PORT JUNCTION UNDER

Description Qty Unit Rate

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made

as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by manufacturer considering site

(D) 6 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

plate, 4-M20 Bolts and 750mm long with necessary G.I. J Bolts .Approx Pole weight 59 kg

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing the brackets and having spread of

0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single Arm bracket 0.5 Mtr

Supplying and erecting Flat plate strip of Bakelite material in pole door reinforcement place for fixing

3 of double pole MCB and other accessories like porcelain type connector 5 way of 60 Amp. With mounting 202 Each 400.00

screws, with nuts bolts & washers suitable for erection on pole & earth bolt

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate, modules erected with necessary

connections as per site situation directed by Engineer In charge. (13) 6A/10A/16A/20A/25A/32A Single

pole Modular MCB Switch. (Make : L&T/Legrand/Havells/Siemens/Schneider)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

5 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size 7000 Mtr. 139.00

of cables (C) 4 core 10 Sq. mm (Make :- Allcab/polycab/RR/Finolex)

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following

size. (c) 3 wire 1.5 sq. mm (Make :- Relexo, Fenolex, R.R brand)

Providing C:C foundation and Pole installation at site including G.I. octagonal pole foundation structure

with necessary G.I. J Bolts M-20 J-bolt of 750 mm length - 4 bolt Foundation of 500x500x1.0 mtr and

cement concrete as per 1:2:3 (20 to 25mm stone metal C:C: plinth with necessary curing and finishing in

approved manner for 6/7/8 mtr pole C C

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with

9 coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire for 190 Each 365.00

Galvenised Octagonal Poles.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size

10 of cable or locating the fault all over the run and back filling the same and making the surface as normal 7000 Mtr 74.00

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to

11 IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench 7000 Mtr 62.00

for laying of cable. below ground / road surface for enclosing cable (A)50 mm outer dia

Dismantling the existing underground cable without damaging it with glands, cable end box including

refilling the trench up to ground level and making coils complete to be placed at different store.

Dismantling the existing any type of street light fittings on pole up to 6 mt height with bracket and making

the site as original complete.

14 Labour Work for removing the Existing Pole, and Installation of New MCB on plate. 190 Each 80.00

I/we We I / We am/are willing to carry out the work at ____% above / below the estimated Sd/-

rates:- I/We hereby declare that I/We studied the conditions of contract, detailed technical

specification and other tender documents of this work and agree to execute the same Deputy Engineer

accordingly. Light Branch

Jamnagar Municipal Corporation