Panyannarkavu Devaswom in Ambalappuzha group- Pucca maintenance to the temple structure and certain urgent work in connection with Mandalam Makaravilakku festival in 1201 ME

Appendix I -

Labour for clearing the site including cutting jungle around pond

Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

water washing and cleaning the old painted surface with pressure pump including hire charges of pump etc complete

Dismantling and removing manglore tiles over roofs including ridges,hips,valley sheet,wind ties and boardering but excluding roof timbers and stacking materials with in a distance of 150 m

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

Supplying Anjily wood wrought and put up for roof members.

Supplying and fixing Dept. wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

Supplying Anjily wood reapers of size 50x25 mm for roof members

Supplying and fixing Dept. wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc . complete.

supplying new MP roofing tiles 410x235 mm or nearest available size

supplying new hip and ridge tiles 400 mm or nearest availiable size

Painting with oil type wood preservative of approved brand and manufacture:Old work (one or more coats)

resetting with old and newly supplied first class MP tiles 410x235 mm or nearest available size

resetting department MP hip ridge tiles of the 400 mm nearest availiable size in CM 1:4

labour engaged for attending necessary repairs and maintenance to doors and windows -carpenter 2 nd class

Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of requiredcolour to give an even shade :One or more coats on old work

Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work