UPGRADATION WORK OF PUBLIC TOILET AND ASPIRATIONAL TOILET AT VARIOUS AREA AT CHHOTA UDEPUR NAGARPALIKA UNDER: SWACHH BHARAT MISSION URBAN 2.0 ( NIRMAL GUJARAT 2.0).

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Chhota udepur Nagarpalika

SECTION-7 BILL OF QUANTITIES-218

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING RESIDENCE AND EXISTING TOILET BLOCK AT VARIOUS

AREAS AT CHHOTAUDEPUR.

GENERAL SUMMARY

Name of Work AMOUNT in Rs.

EXISTING TOILET BLOCK(SULABH SACHHALAYA) NEAR ALIRAJPUR OCTROY

NAKA AT CHHOTAUDEPUR

RENOVATION OF EXISTING TOILET BLOCK (SULABH SACHHALAYA) NEAR

MAHUDI FALIYA POLICE STATION AT CHHOTAUDEPUR.

RENOVATION OF EXISTING TOILET BLOCK(SULABH SACHHALAYA) NEAR

SARDAR PARK MAHILA POLICE STATION AT CHHOTAUDEPUR.

RENOVATION OF EXISTING TOILET BLOCK .OPP FATEHPURA OLD RTO AT

RENOVATION OF EXISTING TOILET BLOCK OPPOSITE KABRASTAN NEAR

PANJARA POLE AT CHHOTAUDEPUR.

RENOVATION OF EXISTING TOILET BLOCK FRONT OF NANA TALAV AND

Sch-6 BEHIND EYE HOSPITAL AT CHHOTAUDEPUR.

Add 18% G.S.T. Rs.

Add 2% Contingency Charges

Add 1% Quality Control

SBD SECTION-7 BILL OF QUANTITIES-219

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING PAY & USE TOILET NEAR ALIRAJPUR OCTROI NAKA AT

Item Qty. Description Total Unit Amount

1 56.00 Removing and scraping of old deteriorated plaster of any

Smt thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift. 19.41 Smt.

2 27.00 Dismentling doors, windows, ventilators etc (wood or steel)

Nos. shutters including chowkhats, architraves, holdfasts and other

attachment etc, complete and stacking them within all lead and lift.

(i) Not exceeding 3 Sq. m in area. 187.52 Ea.

3 10.50 Providing and fixing flush door shutters, soild core construction

Smt with frame of first class hardwood with crossboard and face

veneer or plywood face panels, including bright finished M.S.

piano hinges with necessary screws. (B) Decorative type and

Nickel plated piano hinges (A) in flush door shutters. with

providing rectengular or square vision panel not exceeding

Sq. M. in all types of flush doors. 2768.37 Smt.

4 13.00 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & Shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkhli. Rates are to be inclusive of S.S. Hinges with

necessary screws & alluminium fixtures & fastenings & fastener

sleeve. 2377.76 Smt.

5 3.00 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @

wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @

Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per details

etc complete for window.

SBD SECTION-7 BILL OF QUANTITIES-220

6 4.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

7 163.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill.

8 17.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an

even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

matter. 125.71 Smt

9 0.50 Filling in Foundation & plinth with murrum of selected soil layers of

Cmt. 20 cm. thickness including watering, ramming, consolidating

dressing etc complete.

10 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3-

Cmt coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth (PCC) 3080.90 Cmt

11 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab .

12 0.50 Brick work using common burnt clay building bricks having

Cmt crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional 4121.55 Cmt

13 20.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

14 4.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. First Floor.

SBD SECTION-7 BILL OF QUANTITIES-221

15 4.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor.

16 1.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. First Floor.

17 23.50 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.

18 302.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

19 244.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

20 58.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on

ceiling & sloping roof surfaces to give and even shade over and

including a primer coat with alkali resistance primer of approved

brand after throughly brushing the surface to give and even shade

free from foreign matter and also including preparing the surface

even and smooth.

21 232.00 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

SBD SECTION-7 BILL OF QUANTITIES-222

22 1.50 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

23 4.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a

pair of C.L.I. or Mild Steel Brackets, complete with fittings such as

lead value siphon, 15mm nominal size brass ball value with

polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia flush

bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc. comp. incl

plastic sheet cover including jointing trap with pipe in C.M. 1:1 (

Cement : 1 fine sand) (a) Viterous China - (i) In White Color.

24 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

1 cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

25 3.00 Providing and fixing 430mm x 260mm x 350mm size white

Nos. earthen ware flat back or corner type urinal of approved quality

including. 15mm Dia Stop Tap and Necessary Connections the

urinal with waste pipe etc. complete.

26 8.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

27 8.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

28 3.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

SBD SECTION-7 BILL OF QUANTITIES-223

29 3.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

30 3.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size.

31 3.00 Providing and fixing toilet paper holder (A) C.P. brass.

32 9.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

33 9.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm.

Nos. Inlet and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

34 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type.

35 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

36 2500.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

SBD SECTION-7 BILL OF QUANTITIES-224

37 2.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour.

38 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

wasers. 854.58 Nos.

39 12.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

40 12.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

41 5.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 72.65 Rmt.

42 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-225

43 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

44 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

45 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

46 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on /

in wall / ceiling with following type accessories Cat. III

47 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

48 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire

sq. mm 140.39 Mtr.

SBD SECTION-7 BILL OF QUANTITIES-226

49 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular

Type Accessories Cat. III

50 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door

51 1.00 Miniature circuit breaker single pole 6A to 25A suitable to operate

Ea. on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark

52 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 6790.23 Ea.

53 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh

for watering & bricks masonry block, C.I. Cover complete as per para

7.3 of IS 3043 with necessary length of double Galvanised Iron /

copper earth wire No 6 SWG bolted with lug to the plate and covered

in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly tested

by earth tester confirming to IS (As per drawing) with following

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

54 3.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge] 1596.81 Ea.

55 3.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

SBD SECTION-7 BILL OF QUANTITIES-227

56 3.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

57 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

58 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

59 3.00 Supplying & erecting approved make low noise decorative exhaust

Ea. fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

60 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III

61 2.00 Providing and supplying standard quality single-use PPE Kit

Ea. consisting of coverall suit, gloves, face mask, face shield, and shoe

covers, suitable for protection against contamination and hazardous

exposure. The kit shall be made from approved material, complying

with relevant safety standards and guidelines. Complete in all

respects including packing, transportation, and delivery as directed

by Engineer-in-Charge

62 56.00 Finishing wall with Artistic 3D/Realistic/Semi

Smt realistic/Graffiti/Traditional/ 2D/Multicolor art work with aesthetic

sense done by experience artists team with weatherproof exterior

emulsion paint give a required shape even shade after thoroughly

brushing the surface to remove all dirt, remains of loose powdered

materials etc. up to 3 metre wall height the rate

Add G.E.B. Meter Charges.Rs.

SBD SECTION-7 BILL OF QUANTITIES-228

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING PAY & USE TOILET NEAR MAHUDI FALIYA PT/CT AT

Item Qty. Description Total Unit Amount

1 56.00 Removing and scraping of old deteriorated plaster of any thickness

Smt from wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all

lead and lift. 19.41 Smt.

2 27.00 Dismentling doors, windows, ventilators etc (wood or steel) shutters

Nos. including chowkhats, architraves, holdfasts and other attachment

etc, complete and stacking them within all lead and lift. (i) Not

exceeding 3 Sq. m in area. 187.52 Ea.

3 10.50 Providing and fixing flush door shutters, soild core construction with

Smt frame of first class hardwood with crossboard and face veneer or

plywood face panels, including bright finished M.S. piano hinges

with necessary screws. (B) Decorative type and Nickel plated piano

hinges (A) in flush door shutters. with providing rectengular or

square vision panel not exceeding 0.10 Sq. M. in all types of flush

doors. 2768.37 Smt.

4 13.00 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & Shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkhli.

Rates are to be inclusive of S.S. Hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

5 3.00 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of

0.0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window. 1713.70 Smt.

SBD SECTION-7 BILL OF QUANTITIES-229

6 4.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

7 163.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill. 105.18 Kg.

8 17.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

9 0.50 Filling in Foundation & plinth with murrum of selected soil layers of

Cmt. 20 cm. thickness including watering, ramming, consolidating

dressing etc complete. 296.29 Cmt.

10 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Plinth (PCC) 3080.90 Cmt

11 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab .

12 0.50 Brick work using common burnt clay building bricks having

Cmt crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional 4121.55 Cmt

13 20.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

14 4.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. First Floor. 243.94 Smt.

15 4.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor. 203.98 Smt.

SBD SECTION-7 BILL OF QUANTITIES-230

16 1.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. First Floor. 225.35 Smt.

17 23.50 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and 8 mm

thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc. complete.

18 302.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth. 40.59 Smt.

19 244.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

20 58.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling

& sloping roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

21 232.00 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

material.etc 117.40 Smt.

22 1.50 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

SBD SECTION-7 BILL OF QUANTITIES-231

23 4.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a pair

of C.L.I. or Mild Steel Brackets, complete with fittings such as lead

value siphon, 15mm nominal size brass ball value with polythene

float, C.P. Brass handle unions and couplings for connections with

inlet, outlet and over flow pipes, 40 mm dia flush bend including

cutting holes in walls and making good the same connecting the

flush bend with cistern and closet etc. comp. incl plastic sheet

cover including jointing trap with pipe in C.M. 1:1 ( Cement : 1 fine

sand) (a) Viterous China - (i) In White Color.

24 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

1 cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

25 3.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete.

26 8.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

27 8.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

28 3.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

29 3.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

30 3.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size. 616.42 No.

31 3.00 Providing and fixing toilet paper holder (A) C.P. brass.

SBD SECTION-7 BILL OF QUANTITIES-232

32 9.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

33 9.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

in-charge. 631.02 No.

34 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type.

35 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

36 2500.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

37 2.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour. 2078.58 No.

38 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

wasers. 854.58 Nos.

SBD SECTION-7 BILL OF QUANTITIES-233

39 12.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

40 12.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 119.15 Rmt.

41 5.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 72.65 Rmt.

42 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

43 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-234

44 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected concealed

in / on surface of wall / ceiling complete with Modular type switch &

5 pin Plug erected on PVC / Metallic box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

45 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

46 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III 309.06 Pt.

47 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

48 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a)

with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

49 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular

Type Accessories Cat. III 1133.22 Ea.

50 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used)

(N) Three phase 8 way SS Double door for horizontal single phase

outgoing 3412.79 Ea.

SBD SECTION-7 BILL OF QUANTITIES-235

51 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate on

Ea. 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

52 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 6790.23 Ea.

53 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering

& bricks masonry block, C.I. Cover complete as per para 7.3 of IS

with necessary length of double Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth tester confirming to

IS (As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

54 3.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

55 3.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

56 3.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

57 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

58 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

59 3.00 Supplying & erecting approved make low noise decorative exhaust

Ea. fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

SBD SECTION-7 BILL OF QUANTITIES-236

60 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III 8446.63 Ea.

61 2.00 Providing and supplying standard quality single-use PPE Kit

Ea. consisting of coverall suit, gloves, face mask, face shield, and shoe

covers, suitable for protection against contamination and hazardous

exposure. The kit shall be made from approved material, complying

with relevant safety standards and guidelines. Complete in all

respects including packing, transportation, and delivery as directed

by Engineer-in-Charge 889.31 Ea.

62 56.00 Artistic 3D/Realistic/Semi realistic/Graffiti art work with aesthetic

Smt sense done by experience artists team with water resistance durable

exterior high quality paint up to Any metre wall height Include with

preparing base paint for art work 1212.00 Smt

Add G.E.B. Meter Charges.Rs.

SBD SECTION-7 BILL OF QUANTITIES-237

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING TOILET BLOCK(SULABH SACHHALAYA) NEAR SARDAR PARK

MAHILA POLICE STATION AT CHHOTAUDEPUR.

Item Qty. Description Total Unit Amount

1 54.00 Removing and scraping of old deteriorated plaster of any thickness

Smt from wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift.

2 26.00 Dismentling doors, windows, ventilators etc (wood or steel) shutters

Nos. including chowkhats, architraves, holdfasts and other attachment etc,

complete and stacking them within all lead and lift. (i) Not exceeding

3 Sq. m in area.

3 9.50 Providing and fixing flush door shutters, soild core construction with

Smt frame of first class hardwood with crossboard and face veneer or

plywood face panels, including bright finished M.S. piano hinges with

necessary screws. (B) Decorative type and Nickel plated piano

hinges (A) in flush door shutters. with providing rectengular or square

vision panel not exceeding 0.10 Sq. M. in all types of flush doors.

4 14.50 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & Shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkhli.

Rates are to be inclusive of S.S. Hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

5 1.50 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm (of

Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no:

8687 @ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of 0.0.659

Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm

x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no :

8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

SBD SECTION-7 BILL OF QUANTITIES-238

6 4.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil painting

to wood works etc completed.

7 140.00 Providing and fixing M. S. grills of requried pattern to wooden frames

Kgs. of window etc. with M. S. flats at requried spacings and frame

alround square or round bars with round headed bolts and nuts or by

screws. (A) plain grill. 105.18 Kg.

8 11.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter. 125.71 Smt

9 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Plinth 3080.90 Cmt

10 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab . 4631.86 Cmt

11 0.50 Brick work using common burnt clay building bricks having crushing

Cmt strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

12 11.50 Providing 15mm thick cement plaster in single coat on rough (similar)

Smt. side of single or half brick wall for interior plastering up to floor two

level and finished even and smooth in Cement mortar (1:4) 1cement -

4 sand and finishing with floating coat of neat cement slurry. Ground

Floor. 220.61 Smt.

13 2.50 Providing 15mm thick cement plaster in single coat on rough (similar)

Smt. side of single or half brick wall for interior plastering up to floor two

level and finished even and smooth in Cement mortar (1:4) 1cement -

4 sand and finishing with floating coat of neat cement slurry. First

Floor. 243.94 Smt.

14 7.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even and

smooth in cement mortar 1:4, 1cement - 4sand)and finishing with

floating coat of neat cement slurry. Ground Floor. 203.98 Smt.

SBD SECTION-7 BILL OF QUANTITIES-239

15 3.00 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even and

smooth in cement mortar 1:4, 1cement - 4sand)and finishing with

floating coat of neat cement slurry. First Floor.

16 25.00 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of 12mm

thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and 8 mm thick

finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc. complete.

17 158.50 Applying two coats of Birla or Asian acrylic lappy (putty) or equivalent

Smt. & two coat of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth.

18 90.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign matter

and also including preparing the surface even and smooth.

19 68.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling &

sloping roof surfaces to give and even shade over and including a

primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

smooth. 109.91 Smt.

20 164.00 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

material.etc 117.40 Smt.

21 1.50 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse Sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with colour

cement slurry including finished with flush pointing and cleaning the

surface etc. complete. For Antiskid 1432.78 Smt.

SBD SECTION-7 BILL OF QUANTITIES-240

22 5.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a pair

of C.L.I. or Mild Steel Brackets, complete with fittings such as lead

value siphon, 15mm nominal size brass ball value with polythene

float, C.P. Brass handle unions and couplings for connections with

inlet, outlet and over flow pipes, 40 mm dia flush bend including

cutting holes in walls and making good the same connecting the

flush bend with cistern and closet etc. comp. incl plastic sheet cover

including jointing trap with pipe in C.M. 1:1 ( Cement : 1 fine sand) (a)

Viterous China - (i) In White Color.

23 1.00 Providing and fixing wash down water closet (Indian Type W.C. Pan)

Nos. size 580mm with Viterous China 100mm size integral P or S trap

including jointing the trap with soil pipe in cement mortar 1:1 (

cement : 1 fine sand). Rates including Providing and fixing in cement

mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous china

250mm x 130mm x 30mm footrest to long pattern squatting pan

water closet and 25mm dia chromium plates brass half turn flush

cock of approved quality etc. complete as directed. 1681.65 No.

24 3.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete. 1268.56 No.

25 9.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

26 9.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc. complete

as directed by Engineer-in-charge. 191.73 No.

27 8.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

28 3.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

29 5.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B) 600 mm

x 20 mm size. 616.42 No.

30 3.00 Providing and fixing toilet paper holder (A) C.P. brass.

31 9.00 Providing and fixing 100 mm dia sand cast iron grating for gully, floor

No. or nanhi trap. 36.98 No.

SBD SECTION-7 BILL OF QUANTITIES-241

32 9.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I. Screwed

down or hinged grating and stainless steel jali at F.F.I. Including cost

of making cuts in walls slab floor etc. and making them as per

original testing etc. complete as directed by Engineer-in-charge.

33 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type.

34 Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less

than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm

x 610mm intenal dimensions total weight of cover with frame to be

not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

35 2500.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each with

all necessary fittings & connection etc. complete on terrace

36 3.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i) In

37 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood sheet

and fixing to wooden pluge with c.p brass screws and wasers.

SBD SECTION-7 BILL OF QUANTITIES-242

38 13.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two meter c/c. or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

39 13.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two meter c/c. or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

40 8.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two meter c/c. or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

41 2.00 (B) Providing sock pit of 5.0 Cmt. volume including excavating sand

Nos filling brick-bats with dry masonary work at top for 45 CM height

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed.

42 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate modules erected on /

in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-243

43 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

44 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

Pt. both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

45 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

46 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

47 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

48 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a)

with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

SBD SECTION-7 BILL OF QUANTITIES-244

49 4.00 Providing & erecting Switch board for Computer or electric apparatus

Ea. consisting of following items in single board erected on PVC / Metal

board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as

directed 1 no. 6A/16A universal plug-switch combined. 4 nos. 6A

Switch 4 nos. 6A 5 pin Plug [B] For Modular Type Accessories Cat. III

50 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase isolation

type (PPI) (b) sheet steel double door

51 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate on

Ea. 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

52 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 6790.23 Ea.

53 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering &

bricks masonry block, C.I. Cover complete as per para 7.3 of IS

with necessary length of double Galvanised Iron / copper earth wire No

6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to the nearest switch gear with end

socket as per direction & duly tested by earth tester confirming to IS

(As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

54 5.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

55 5.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Ea. Fan box. 18.18 Ea.

SBD SECTION-7 BILL OF QUANTITIES-245

56 5.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S.

Ea. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

57 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

58 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

59 1.00 Supplying & erecting approved make low noise decorative exhaust fan

Ea. having size 200mm with 1350 RPM with square frame ABS body with

inbuilt lowers & square frame.

60 5.00 Providing and supplying standard quality single-use PPE Kit consisting

Ea. of coverall suit, gloves, face mask, face shield, and shoe covers, suitable

for protection against contamination and hazardous exposure. The kit

shall be made from approved material, complying with relevant safety

standards and guidelines. Complete in all respects including packing,

transportation, and delivery as directed by Engineer-in-Charge

61 37.27 Artistic 3D/Realistic/Semi realistic/Graffiti art work with aesthetic

Smt sense done by experience artists team with water resistance durable

exterior high quality paint up to Any metre wall height Include with

preparing base paint for art work

SBD SECTION-7 BILL OF QUANTITIES-246

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING TOILET BLOCK .OPP FATEHPURA OLD RTO AT

Item Qty. Description Total Unit Amount

1 6.50 Dismentaling tiled or stone floors laid in mortar including stacking

Smt of serviceable materilas and disposal of unserviceable material

with all lead and lift. 47.94 Smt.

2 71.00 Removing and scraping of old deteriorated plaster of any

Smt thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift.

3 6.00 Dismentling doors, windows, ventilators etc (wood or steel)

Nos. shutters including chowkhats, architraves, holdfasts and other

attachment etc, complete and stacking them within all lead and lift.

(i) Not exceeding 3 Sq. m in area. 187.52 Ea.

4 4.50 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & Shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkhli. Rates are to be inclusive of S.S. Hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.

5 1.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

6 40.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill.

7 4.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

SBD SECTION-7 BILL OF QUANTITIES-247

8 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

9 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab .

10 1.00 Brick work using common burnt clay building bricks having

Cmt crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

11 6.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

12 1.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor. 203.98 Smt.

13 5.50 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.

14 46.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

15 38.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

SBD SECTION-7 BILL OF QUANTITIES-248

16 8.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling

& sloping roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

17 34.50 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

18 8.00 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

20 1.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a

pair of C.L.I. or Mild Steel Brackets, complete with fittings such as

lead value siphon, 15mm nominal size brass ball value with

polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia flush

bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc. comp. incl

plastic sheet cover including jointing trap with pipe in C.M. 1:1 (

Cement : 1 fine sand) (a) Viterous China - (i) In White Color.

21 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

1 cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

22 1.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-249

23 2.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

24 2.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

25 2.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

26 1.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

27 1.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size. 616.42 No.

28 1.00 Providing and fixing toilet paper holder (A) C.P. brass.

29 2.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

30 2.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm.

Nos. Inlet and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

in-charge. 631.02 No.

31 1.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type.

SBD SECTION-7 BILL OF QUANTITIES-250

32 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

33 5000.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

34 1.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour. 2078.58 No.

35 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

wasers. 854.58 Nos.

36 17.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 195.67 Rmt.

37 17.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

SBD SECTION-7 BILL OF QUANTITIES-251

38 12.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 72.65 Rmt.

39 1.00 (B) Providing sock pit of 5.0 Cmt. volume including excavating

Nos sand filling brick-bats with dry masonary work at top for 45 CM

height including covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc. complete as directed.

40 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

41 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

42 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

SBD SECTION-7 BILL OF QUANTITIES-252

43 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

44 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

45 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

46 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

47 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular

Type Accessories Cat. III

48 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door

49 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate

Ea. on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark

Cat.III 123.22 Ea.

SBD SECTION-7 BILL OF QUANTITIES-253

50 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 6790.23 Ea.

51 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover complete as per para

of IS 3043 with necessary length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

52 5.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

53 5.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

54 5.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

55 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

56 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

57 5.00 Supplying & erecting approved make low noise decorative exhaust

Ea. fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

SBD SECTION-7 BILL OF QUANTITIES-254

58 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III 8446.63 Ea.

59 5.00 Providing and supplying standard quality single-use PPE Kit

Ea. consisting of coverall suit, gloves, face mask, face shield, and shoe

covers, suitable for protection against contamination and hazardous

exposure. The kit shall be made from approved material, complying

with relevant safety standards and guidelines. Complete in all

respects including packing, transportation, and delivery as directed

by Engineer-in-Charge

Add G.E.B. Meter Charges.Rs.

SBD SECTION-7 BILL OF QUANTITIES-255

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING TOILET BLOCK OPPOSITE KABRASTAN NEAR PANJARA POLE AT

Item Qty. Description Total Unit Amount

1 67.00 Removing and scraping of old deteriorated plaster of any

Smt thickness from wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift. 19.41 Smt.

2 20.00 Dismentling doors, windows, ventilators etc (wood or steel)

Nos. shutters including chowkhats, architraves, holdfasts and other

attachment etc, complete and stacking them within all lead and lift.

(i) Not exceeding 3 Sq. m in area. 187.52 Ea.

3 6.00 Providing and fixing flush door shutters, soild core construction

Smt with frame of first class hardwood with crossboard and face

veneer or plywood face panels, including bright finished M.S. piano

hinges with necessary screws. (B) Decorative type and Nickel

plated piano hinges (A) in flush door shutters. with providing

rectengular or square vision panel not exceeding 0.10 Sq. M. in all

types of flush doors. 2768.37 Smt.

4 16.00 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & Shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkhli. Rates are to be inclusive of S.S. Hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.

5 1.50 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of

0.0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

SBD SECTION-7 BILL OF QUANTITIES-256

6 5.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

7 140.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill.

8 14.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

9 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

11 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab .

10 1.00 Brick work using common burnt clay building bricks having

Cmt crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

11 17.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

12 6.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. First Floor.

SBD SECTION-7 BILL OF QUANTITIES-257

13 6.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor.

14 2.00 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. First Floor. 225.35 Smt.

15 34.00 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.

16 205.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

17 151.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

18 53.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling

& sloping roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

19 226.00 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

material.etc 117.40 Smt.

SBD SECTION-7 BILL OF QUANTITIES-258

20 1.50 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

22 2.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a

pair of C.L.I. or Mild Steel Brackets, complete with fittings such as

lead value siphon, 15mm nominal size brass ball value with

polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia flush

bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc. comp. incl

plastic sheet cover including jointing trap with pipe in C.M. 1:1 (

Cement : 1 fine sand) (a) Viterous China - (i) In White Color.

23 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

1 cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

24 3.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete. 1268.56 No.

25 12.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

26 12.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

27 8.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

28 5.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

SBD SECTION-7 BILL OF QUANTITIES-259

29 5.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size. 616.42 No.

30 2.00 Providing and fixing toilet paper holder (A) C.P. brass.

31 9.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

32 9.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

33 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type.

34 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

35 2500.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

36 3.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour. 2078.58 No.

SBD SECTION-7 BILL OF QUANTITIES-260

37 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

wasers. 854.58 Nos.

38 17.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 195.67 Rmt.

39 17.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

40 8.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 72.65 Rmt.

41 2.00 (B) Providing sock pit of 5.0 Cmt. volume including excavating

Nos sand filling brick-bats with dry masonary work at top for 45 CM

height including covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc. complete as directed.

42 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-261

43 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

44 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

45 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

46 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

47 50.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

48 50.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

SBD SECTION-7 BILL OF QUANTITIES-262

49 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular

Type Accessories Cat. III 1133.22 Ea.

50 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be

used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door

51 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate on

Ea. 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

52 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 6790.23 Ea.

53 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for

watering & bricks masonry block, C.I. Cover complete as per para

of IS 3043 with necessary length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to the plate and covered in

mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest

switch gear with end socket as per direction & duly tested by earth

tester confirming to IS (As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

54 5.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

55 5.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

SBD SECTION-7 BILL OF QUANTITIES-263

56 5.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

57 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

58 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

59 3.00 Supplying & erecting approved make low noise decorative exhaust

Ea. fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

60 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III 8446.63 Ea.

Add G.E.B. Meter Charges.Rs.

SBD SECTION-7 BILL OF QUANTITIES-264

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING TOILET BLOCK FRONT OF NANA TALAV AND BEHIND EYE

HOSPITAL AT CHHOTAUDEPUR.

Item Qty. Description Total Unit Amount

2 67.00 Removing and scraping of old deteriorated plaster of any thickness

Smt from wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all

lead and lift. 19.41 Smt.

3 20.00 Dismentling doors, windows, ventilators etc (wood or steel) shutters

Nos. including chowkhats, architraves, holdfasts and other attachment

etc, complete and stacking them within all lead and lift. (i) Not

exceeding 3 Sq. m in area. 187.52 Ea.

4 6.00 Providing and fixing flush door shutters, soild core construction with

Smt frame of first class hardwood with crossboard and face veneer or

plywood face panels, including bright finished M.S. piano hinges

with necessary screws. (B) Decorative type and Nickel plated piano

hinges (A) in flush door shutters. with providing rectengular or

square vision panel not exceeding 0.10 Sq. M. in all types of flush

doors. 2768.37 Smt.

5 16.00 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done in

situ alongwith embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & Shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkhli.

Rates are to be inclusive of S.S. Hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

6 1.50 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of

0.0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window. 1713.70 Smt.

SBD SECTION-7 BILL OF QUANTITIES-265

7 5.50 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

8 200.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill. 105.18 Kg.

9 14.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

10 0.50 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Plinth 3080.90 Cmt

11 0.50 Providing and laying controlled cement concrete M-250 and curing

Cmt complete including the cost of formwork but Excluding the cost of

reinforcement for reinforced concrete work in Base Slab .

11 1.00 Brick work using common burnt clay building bricks having crushing

Cmt strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

12 17.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

13 6.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. First Floor.

14 6.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor.

SBD SECTION-7 BILL OF QUANTITIES-266

15 2.00 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. First Floor. 225.35 Smt.

16 35.00 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and 8 mm

thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc. complete.

17 205.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

18 151.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

19 53.50 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling

& sloping roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

smooth. 109.91 Smt.

20 232.00 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

21 1.50 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

SBD SECTION-7 BILL OF QUANTITIES-267

23 2.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a pair

of C.L.I. or Mild Steel Brackets, complete with fittings such as lead

value siphon, 15mm nominal size brass ball value with polythene

float, C.P. Brass handle unions and couplings for connections with

inlet, outlet and over flow pipes, 40 mm dia flush bend including

cutting holes in walls and making good the same connecting the

flush bend with cistern and closet etc. comp. incl plastic sheet cover

including jointing trap with pipe in C.M. 1:1 ( Cement : 1 fine sand)

(a) Viterous China - (i) In White Color.

24 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

25 3.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete. 1268.56 No.

26 13.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

27 13.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

28 8.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

29 5.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

30 5.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size.

31 2.00 Providing and fixing toilet paper holder (A) C.P. brass.

SBD SECTION-7 BILL OF QUANTITIES-268

32 9.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

33 9.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

in-charge. 631.02 No.

34 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type. 1292.19 No.

35 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with

frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

36 2500.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each with

all necessary fittings & connection etc. complete on terrace

37 3.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour. 2078.58 No.

38 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

wasers. 854.58 Nos.

SBD SECTION-7 BILL OF QUANTITIES-269

39 17.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

40 17.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

41 8.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

42 2.00 (B) Providing sock pit of 5.0 Cmt. volume including excavating sand

Nos filling brick-bats with dry masonary work at top for 45 CM height

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed.

43 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-270

44 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

45 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected concealed

in / on surface of wall / ceiling complete with Modular type switch &

5 pin Plug erected on PVC / Metallic box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

46 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

47 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

48 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

49 40.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a)

with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

SBD SECTION-7 BILL OF QUANTITIES-271

50 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular Type

Accessories Cat. III

51 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used)

(N) Three phase 8 way SS Double door for horizontal single phase

outgoing 3412.79 Ea.

52 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate on

Ea. 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

53 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

54 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering

& bricks masonry block, C.I. Cover complete as per para 7.3 of IS

with necessary length of double Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth tester confirming to

IS (As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

55 5.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

56 5.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

SBD SECTION-7 BILL OF QUANTITIES-272

57 5.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

58 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

59 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

60 3.00 Supplying & erecting approved make low noise decorative exhaust fan

Ea. having size 200mm with 1350 RPM with square frame ABS body with

inbuilt lowers & square frame.

61 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III

62 5.00 Providing and supplying standard quality single-use PPE Kit

Ea. consisting of coverall suit, gloves, face mask, face shield, and shoe

covers, suitable for protection against contamination and hazardous

exposure. The kit shall be made from approved material, complying

with relevant safety standards and guidelines. Complete in all

respects including packing, transportation, and delivery as directed

by Engineer-in-Charge

63 20.83 Artistic 3D/Realistic/Semi realistic/Graffiti art work with aesthetic

Smt sense done by experience artists team with water resistance durable

exterior high quality paint up to Any metre wall height Include with

preparing base paint for art work 1212.00 Smt

SBD SECTION-7 BILL OF QUANTITIES-273

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING RESIDENCE AND EXISTING TOILET

BLOCK AT VARIOUS AREAS AT CHHOTAUDEPUR.

SCHEDULE-B7-GENERAL SUMMARY

Name of Work AMOUNT in Rs.

RENOVATION OF EXISTING TOILET BLOCK NEAR GOVT.

HOSPITAL OPPOSITE NANA TALAV AT CHHOTAUDEPUR.

Add 18% G.S.T. Rs.

Add 2% Contingency Charges

Add 1% Quality Control

SBD SECTION-7 BILL OF QUANTITIES-274

CHHOTAUDEPUR MUNICIPALITY, CHHOTAUDEPUR

NAME OF WORK :- RENOVATION OF EXISTING TOILET BLOCK NEAR GOVT. HOSPITAL OPPOSITE NANA TALAV

AT CHHOTAUDEPUR.

Item Qty. Description Total Unit Amount

1 31.00 Dismentaling tiled or stone floors laid in mortar including stacking

Smt of serviceable materilas and disposal of unserviceable material

with all lead and lift. 47.94 Smt.

2 571.00 Removing and scraping of old deteriorated plaster of any thickness

Smt from wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all

lead and lift. 19.41 Smt.

3 25.00 Dismentling doors, windows, ventilators etc (wood or steel)

Nos. shutters including chowkhats, architraves, holdfasts and other

attachment etc, complete and stacking them within all lead and lift.

(i) Not exceeding 3 Sq. m in area. 187.52 Ea.

4 8.00 Providing and fixing flush door shutters, soild core construction

Smt with frame of first class hardwood with crossboard and face

veneer or plywood face panels, including bright finished M.S. piano

hinges with necessary screws. (B) Decorative type and Nickel

plated piano hinges (A) in flush door shutters. with providing

rectengular or square vision panel not exceeding 0.10 Sq. M. in all

types of flush doors. 2768.37 Smt.

5 11.50 Providing and fixing FRP frame size 100x 50 mm and 28 mm thick

Smt FRP Depress panel shutter having extra reinforcement on side &

edges in Gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & Shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkhli. Rates are to be inclusive of S.S. Hinges with necessary

screws & alluminium fixtures & fastenings & fastener sleeve.

6 2.50 Providing and fixing window having extruded aluminum Colour

Smt anodized section frame main outer size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Sectio no:8758 @ wt.of

0.0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of

Jindal Section no : 8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window. 1713.70 Smt.

SBD SECTION-7 BILL OF QUANTITIES-275

7 4.00 Providing and fixing glazed louverd glass windows and ventilators

Smt with teakwood frame 10cm x 7cm size including 3 coat of oil

painting to wood works etc completed.

8 200.00 Providing and fixing M. S. grills of requried pattern to wooden

Kgs. frames of window etc. with M. S. flats at requried spacings and

frame alround square or round bars with round headed bolts and

nuts or by screws. (A) plain grill.

9 13.00 Painting two coats (INcluding priming coat) on new steel and other

Smt metal surfaces with enamel paint brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter.

10 196.50 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. Ground Floor. 220.61 Smt.

11 117.00 Providing 15mm thick cement plaster in single coat on rough

Smt. (similar) side of single or half brick wall for interior plastering up to

floor two level and finished even and smooth in Cement mortar

(1:4) 1cement - 4 sand and finishing with floating coat of neat

cement slurry. First Floor. 243.94 Smt.

12 25.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. Ground Floor.

13 37.50 Providing and laying 10mm thick cement plaster in single coat on

Smt. ceiling for interior plastering up to floor two level and fiished even

and smooth in cement mortar 1:4, 1cement - 4sand)and finishing

with floating coat of neat cement slurry. First Floor.

14 169.50 Providing and Laying 20 mm thick sand face cement plaster on

Smt. Walls upto height of 10 mts. Above ground level consisting of

12mm thick backing coat of C.M 1:3 (1 Cement, 3 Sand ) and

mm thick finishing coat of C.M 1:1 (1 Cement, 1 Sand) etc.

complete. 337.52 Smt.

SBD SECTION-7 BILL OF QUANTITIES-276

15 376.00 Applying two coats of Birla or Asian acrylic lappy (putty) or

Smt. equivalent & two coat of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth. 40.59 Smt.

16 313.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on wall

surfaces to give and even shade over and including a primer coat

with alkali resistance primer of approved brand after throughly

brushing the surface to give and even shade free from foreign

matter and also including preparing the surface even and smooth.

17 63.00 Distempering (Three Coat) with oil bound washable distemper of

Smt. approved brand and manufacture and of required shade on ceiling

& sloping roof surfaces to give and even shade over and including

a primer coat with alkali resistance primer of approved brand after

throughly brushing the surface to give and even shade free from

foreign matter and also including preparing the surface even and

18 169.50 Finishing wall with Weather Proof Emulsion Exterior Paint on wall

Smt. surface (two coat) to give and even shade and of approved brand

and manufacture including throughly brooming and brushing the

surface to remove all dirts, and remians of loose powdered

material.etc 117.40 Smt.

19 31.00 Providing and laying 24"x24" Vitrified 8 mm thick tiles flooring over

Smt. 20 mm avrage base of cement mortar 1:6 (1 Cement : 6 Coarse

Sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with

colour cement slurry including finished with flush pointing and

cleaning the surface etc. complete. For Antiskid

20 12.00 Providing and laying colored glazed tiles of the size 300 x 200 x

Smt 8mm/300 x 450 x 8mm in skirting risers of steps and dedo on

10mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with matching colored cement slurry. 1452.79 Smt.

21 5.00 Providing and fixing wash down water closet European type W.C.

Nos. Pan with integral "P" or "S" trap and PVC flushing cistern with a

pair of C.L.I. or Mild Steel Brackets, complete with fittings such as

lead value siphon, 15mm nominal size brass ball value with

polythene float, C.P. Brass handle unions and couplings for

connections with inlet, outlet and over flow pipes, 40 mm dia flush

bend including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet etc. comp. incl

plastic sheet cover including jointing trap with pipe in C.M. 1:1 (

Cement : 1 fine sand) (a) Viterous China - (i) In White Color.

SBD SECTION-7 BILL OF QUANTITIES-277

22 1.00 Providing and fixing wash down water closet (Indian Type W.C.

Nos. Pan) size 580mm with Viterous China 100mm size integral P or S

trap including jointing the trap with soil pipe in cement mortar 1:1 (

1 cement : 1 fine sand). Rates including Providing and fixing in

cement mortar 1:3 (1 cement : 3 fine sand) a pair of white viterous

china 250mm x 130mm x 30mm footrest to long pattern squatting

pan water closet and 25mm dia chromium plates brass half turn

flush cock of approved quality etc. complete as directed.

23 2.00 Providing and fixing 430mm x 260mm x 350mm size white earthen

Nos. ware flat back or corner type urinal of approved quality including.

15mm Dia Stop Tap and Necessary Connections the urinal with

waste pipe etc. complete. 1268.56 No.

24 7.00 Providing and fixing screw down bib tap of following size (A) Brass

Nos. screw bib tap polished bright - 15mm

25 7.00 Providing and fixing 15mm. Dia C. P. Brass stop cock of approved

No. quality including fixing the same in pipeline and testing etc.

complete as directed by Engineer-in-charge.

26 8.00 Providing and fixing gun metal chek or non return fullway wheel

No. valve. (A) 15 mm Dia. 186.83 No.

27 2.00 Providing and fixing C.P. brass shower rose with 15 mm or 20 mm

No. inlet (A) 100 mm Dia. 300.34 No.

28 3.00 Providing and fixing C.P. brass towel rail complete with C.P. brass

No. brackets fixed to wooden pluges with C.P. brass screws (B)

mm x 20 mm size.

29 2.00 Providing and fixing toilet paper holder (A) C.P. brass.

30 7.00 Providing and fixing 100 mm dia sand cast iron grating for gully,

No. floor or nanhi trap. 36.98 No.

31 7.00 Providing and fixing Cast Iron (Spun nahni trap of the 100mm. Inlet

Nos. and 50mm. Dia outlet having self cleaning design with C. I.

Screwed down or hinged grating and stainless steel jali at F.F.I.

Including cost of making cuts in walls slab floor etc. and making

them as per original testing etc. complete as directed by Engineer-

in-charge. 631.02 No.

SBD SECTION-7 BILL OF QUANTITIES-278

32 4.00 Providing and fixing SW gully trap with CI grating brick masonry

No. chamber and water tight CI cover frame of 300mmx300mm size

inside with standard weight. Square mouth Traps (A) 100x100mm

size P trap type. 1292.19 No.

33 Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

1.00 Extra over items 24.44 for every additional depth of 0.1M. of part

Nos. thereof beyond 450mm depth for Brick masonry chamber.(i) for

455mm x 610mm size.

34 5000.00 Providing erecting and fixing double coated syntex PVC ISI or

Lits. equivalent PVC (ISI) mark water tank of required capecity each

with all necessary fittings & connection etc. complete on terrace

35 2.00 Providing and fixing washbasin with single hole for pillar tape with

No. C.I. or M.S. brackets painted white including cutting holes and

making good the same but Including all Necessary fittings. (A)

vitreous china : (ii) Flat back washbasin 550 mm x 400 mm size (i)

In white colour. 2078.58 No.

36 2.00 Providing and fixing 600 mm x 450 mm bevelled edge mirror of

No. superior glass mounted on 6 mm thick A.C Sheets or plywood

sheet and fixing to wooden pluge with c.p brass screws and

38 15.00 Providing, laying and jointing in true line and level 50 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

SBD SECTION-7 BILL OF QUANTITIES-279

39 15.00 Providing, laying and jointing in true line and level 32 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

materials. 119.15 Rmt.

40 10.00 Providing, laying and jointing in true line and level 15 mm dia

Rmt. U.P.V.C. Pipe (SCH-40) for cold water including fittings make as

Prince/ supreme/astral/finolex or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c. or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

41 2.00 (B) Providing sock pit of 5.0 Cmt. volume including excavating

Nos sand filling brick-bats with dry masonary work at top for 45 CM

height including covering the top with stone including providing

vatas in C.M. 1:3 with finishing curing etc. complete as directed.

42 20.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

Pt. sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic box, single mounting

base frame covered with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

43 4.00 Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

Pt. (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular

type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories Cat. III

SBD SECTION-7 BILL OF QUANTITIES-280

44 10.00 Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

Pt. (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with

appropriate front plate modules erected on / in wall / ceiling as per

pipe erected with following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessoriesCat. III

45 4.00 [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Pt. (a) with medium class Rigid PVC pipe and accessories Cat. III

46 10.00 Point wiring for Looped Plug with 6A Modular type switch & 5 pin

Pt. socket erected on PVC / Metallic box, single mounting base frame

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

47 50.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (a) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

48 50.00 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Mtr. Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.

49 4.00 Providing & erecting Switch board for Computer or electric

Ea. apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug [B] For Modular

Type Accessories Cat. III 1133.22 Ea.

50 1.00 Providing and erecting Sheet Steel powder coated MCB distribution

Ea. board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door 3412.79 Ea.

SBD SECTION-7 BILL OF QUANTITIES-281

51 1.00 Miniature circuit breaker single pole 6A to 32A suitable to operate on

Ea. 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

52 1.00 Approved make Four pole moulded case circuit breaker having

Ea. breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

53 1.00 Supplying & erecting funnel type earthing having earth plate of

Ea. following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering

& bricks masonry block, C.I. Cover complete as per para 7.3 of IS

with necessary length of double Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to the nearest switch gear with

end socket as per direction & duly tested by earth tester confirming

to IS (As per drawing) with following specification

(A) With 30 x 30 x 0.35 cms: C.I. earth plate 2311.89 Ea.

54 5.00 Providing and erecting Approved make Ceiling fan with double ball

Ea. bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy and 30 cms. down rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

55 5.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Ea. or Fan box. 18.18 Ea.

56 5.00 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm

Ea. M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round

57 20.00 (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Ea. Surge - 4KV,IP-20, 4 feet Cat-lll

58 15.00 Approved make C.F.L.Retrofit 20 / 23 / 25 / 26 Watt. erected if

Ea. required Cat-ll 141.40 Ea.

SBD SECTION-7 BILL OF QUANTITIES-282

59 3.00 Supplying & erecting approved make low noise decorative exhaust

Ea. fan having size 200mm with 1350 RPM with square frame ABS body

with inbuilt lowers & square frame.

60 1.00 Supplying & erecting approved make self-priming domestic

Ea. monoblock water pump with 1 H.P motor, suitable for operation on

230 volts, 50c/s. AC supply with metallic flange, and M.S. impeller

delivery and following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat.III

61 5.00 Providing and supplying standard quality single-use PPE Kit

Ea. consisting of coverall suit, gloves, face mask, face shield, and shoe

covers, suitable for protection against contamination and hazardous

exposure. The kit shall be made from approved material, complying

with relevant safety standards and guidelines. Complete in all

respects including packing, transportation, and delivery as directed

by Engineer-in-Charge

62 5.00 Providing and supplying plastic waste bin made of High-Density

Ea. Polyethylene (HDPE), 10-litre capacity, green colour, swing-type lid,

non-perforated body, with handle, complete as per approved

specifications and direction of Engineer-in-Charge.

63 30.00 Providing and supplying solid air freshener (Odonil or approved

Ea. equivalent), 48 gm capacity, suitable for toilets, washrooms, offices,

and public areas, complete as directed by the Engineer-in-Charge.

64 1.00 Providing, supplying, installing, testing and commissioning Automatic

Ea. Coin Operated Sanitary Napkin Vending Machine, STRAWBKIW

Model TX/AKR/AVM/100 or approved equivalent, suitable for

dispensing sanitary napkins in schools, colleges, offices, hospitals and

public washrooms, fabricated from powder-coated Mild Steel (MS)

body with automatic coin-operated dispensing mechanism, multiple

coin acceptance facility, spiral loading system, minimum storage

capacity 100–125 sanitary napkins, lockable front access door,

electronic control system, display indicators, complete with all

accessories, mounting arrangements, wiring up to nearest power

point, transportation, loading/unloading, installation, testing,

commissioning and demonstration, complete as per manufacturer's

specifications and as directed by the Engineer-in-Charge.

SBD SECTION-7 BILL OF QUANTITIES-283

65 365.00 Providing labour for sweeping and cleaning of toilet block once per

Days day, including cleaning of floor, WC, urinals, wash basins, mirrors,

doors, partitions, removal of waste, and maintaining hygienic

conditions, complete with labour, tools, and equipment as directed by

the Engineer-in-Charge.

66 1.00 Supplying and fixing wall-mounted complaint/suggestion box made

Each of CRCA steel sheet with powder-coated finish, complete with lock,

key, and all necessary fixing accessories as directed by Engineer-in-

67 1.00 Providing, installing, testing and commissioning of Toilet Feedback

Each Machine with three push-button feedback options

(Excellent/Clean/Dirty or Good/Average/Dirty), suitable for public

toilets, government buildings, schools, hospitals, bus stands and other

public facilities. The system shall be wall-mounted/table-top type

with mild steel powder-coated enclosure, LED indication, electronic

control unit, 230V AC operation, real-time feedback recording and

monitoring facility, complete with all internal wiring, mounting

accessories, power supply unit, commissioning, testing and

satisfactory operation as directed by the Engineer-in-Charge.

Add G.E.B. Meter Charges.Rs.

SBD SECTION-7 BILL OF QUANTITIES-284