Tripura

Active

Works

Civil Works - Water Works

UWS Scheme under North Tripura District during the year 2026-27/SH- Remodelling / Extension of Pipeline and Providing domestic Connection from Thana road Bazar to Netaji Road within the area of Dharmanagar Municipal Council

Chief Engineer, PWD (DWS)

Dharmanagar | North Tripura, Tripura

Amount: ₹13.6 LCloses: 28 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published16 Oct 2026
Closes28 Oct 2026
Bid Opening28 Oct 2026

Tender Value

₹13.6 L

EMD Value

₹27,239

Closing Date

28 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

The Executive Engineer, DWS Division Dharmanagar

Address

Office of the Executive Engineer, DWS Division Dharmanagar, North Tripura PIN _799250

Work Description

UWS Scheme under North Tripura District during the year 2026-27/SH- Remodelling / Extension of Pipeline and Providing domestic Connection from Thana road Bazar to Netaji Road within the area of Dharmanagar Municipal Council

Tender Information

Tender ID

2026_CEDWS_78314_1

Reference Number

69/EE/DWS/DMN/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Period of Work

60 days

Location

Dharmanagar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please Refer Bid Document

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical/Finance

Requiredi) Bill of Quantity (BOQ) (.xls)

Requiredii) Tender documents (DNIeT) (.pdf)

Requirediii) All required Annexure as per DNIeT (.pdf)

Requirediv) All required Appendix as per DNIeT (.pdf)

Requiredv) All required documents as per DNIeT (.pdf)

Requiredvi) Other documents if any (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,000

EMD Fee Amount

₹27,239

Important Dates

Last Activity

16 Oct 2026

Published

16 Oct 2026

Bid Opening

28 Oct 2026

Download Starts

16 Oct 2026

Download Ends

28 Oct 2026

Submission Starts

16 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (20 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Sub Head : Laying of pipeline Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.
1.1	A. For UPVC pipes in new work a). In all kinds of soil i. For pipes not exceeding 90 mm dia	12	Mtr	87.6	₹1,051.2
1.2	B). For G.I. / C.I. / D.I. pipes in new work a). In all kinds of soil ii). For pipes exceeding 90 mm dia but not exceeding 300 mm dia	400	Mtr	133.8	₹53,520
2	Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A). Class - 3 ( working pressure 6.0 kg / cm2) i) 90 mm OD	12	Mtr	271.4	₹3,256.8
3	Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	400	Mtr	2,602	₹10,40,800
4	Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	75	Joints	144.5	₹10,837.5
5	Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. iv). 150 mm dia. A) PN - 1.6	2	Nos	8,238.6	₹16,477.2
6	Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	2	Nos	185.2	₹370.4
7	Providing and laying D.I. specials of class K - 12 suitable for push -on jointing as per IS : 9523 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) Upto 300 mm dia	0.58	ton	2,22,193.8	₹1,28,872.4
8	Providing and fixing brass ferrule with C.I. cover conforming to IS :2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ii) 15 mm nominal bore	36	Nos	382.7	₹13,777.2

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.76 MB

Work Item Documents

BOQ_79721.xls

BOQ • 0.32 MB

DNIeT69EE.pdf

Tender Documents • 2.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Sub Head : Laying of pipeline Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.
1.1	A. For UPVC pipes in new work a). In all kinds of soil i. For pipes not exceeding 90 mm dia	12	Mtr	87.6	₹1,051.2
1.2	B). For G.I. / C.I. / D.I. pipes in new work a). In all kinds of soil ii). For pipes exceeding 90 mm dia but not exceeding 300 mm dia	400	Mtr	133.8	₹53,520
2	Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A). Class - 3 ( working pressure 6.0 kg / cm2) i) 90 mm OD	12	Mtr	271.4	₹3,256.8
3	Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	400	Mtr	2,602	₹10,40,800
4	Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	75	Joints	144.5	₹10,837.5
5	Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. iv). 150 mm dia. A) PN - 1.6	2	Nos	8,238.6	₹16,477.2
6	Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia	2	Nos	185.2	₹370.4
7	Providing and laying D.I. specials of class K - 12 suitable for push -on jointing as per IS : 9523 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) Upto 300 mm dia	0.58	ton	2,22,193.8	₹1,28,872.4
8	Providing and fixing brass ferrule with C.I. cover conforming to IS :2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ii) 15 mm nominal bore	36	Nos	382.7	₹13,777.2

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Sub Head : Laying of pipeline Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.

1.1

A. For UPVC pipes in new work a). In all kinds of soil i. For pipes not exceeding 90 mm dia

Mtr

87.6

₹1,051.2

1.2

B). For G.I. / C.I. / D.I. pipes in new work a). In all kinds of soil ii). For pipes exceeding 90 mm dia but not exceeding 300 mm dia

400

Mtr

133.8

₹53,520

Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A). Class - 3 ( working pressure 6.0 kg / cm2) i) 90 mm OD

Mtr

271.4

₹3,256.8

Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia

400

Mtr

2,602

₹10,40,800

Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia

Joints

144.5

₹10,837.5

Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. iv). 150 mm dia. A) PN - 1.6

Nos

8,238.6

₹16,477.2

Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification and direction of the Engineer - in - charge. i) 150 mm dia

Nos

185.2

₹370.4

Providing and laying D.I. specials of class K - 12 suitable for push -on jointing as per IS : 9523 as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. i) Upto 300 mm dia

0.58

ton

2,22,193.8

₹1,28,872.4

Providing and fixing brass ferrule with C.I. cover conforming to IS :2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. ii) 15 mm nominal bore

Nos

382.7

₹13,777.2