Repairing/Renovation of JanSeva Kendra ( By providing & Renovation, Vitrified, Plaster, color, Door-Window, anti termite Treatment, Shed etc.)

Name of Work :Repairing/Renovation of JanSeva Kendra ( By providing & Renovation, Vitrified, Plaster, color, Door-Window, anti termite

Treatment, Shed etc.)

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 21.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats Each 192.09 Rupees One Hundred Estimated

architraves, holdfasts and other attachment etc. complete and stacking them within all lead Ninety Two Paise Nine Only

and lift.(i) Not exceeding 3 Sq.M. in area.

2 4.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing No 414.23 Rupees Four Hundred

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

3 61.00 Demolition of Brick work and stone masonry including stacking of serviceable materilas Cum 562.89 Rupees Five Hundred Sixty

and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. Two Paise Eighty Nine Only

4 37.00 Demolition including stacking of serviceable materilas and disposal of unserviceable Cum 1082.35 Rupees One Thousand

materials with all lead and lift. (i) R.C.C. work Eighty Two Paise Thirty

5 181.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas SqM 49.12 Rupees Fourty Nine Paise

and disposal of unserviceable materials with all lead and lift. Twelve Only

6 354.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift.

7 52.00 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded Cum 4520.05 Rupees Four Thousand Five

stone aggregates 20 mm nominal size) and curing complete including cost of formwork and Hundred Twenty Paise

reinforcement for reinforced concrete work in (A) Foundations, footings, Base or columns Five Only

and Mass concrete

8 22.00 Providing and Laying W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm Cum 1255.20 Rupees One Thousand Two

in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, including Hundred Fifty Five Paise

spreading, watering and cosolidation by vibratory roller as per MoRTH specifications etc. Twenty Only

complete as directed by Engineer-in-charge.

9 1875.00 Providing and fixing M.S. grills of required pattern to frames of windows etc. with M.S. KG 109.24 Rupees One Hundred Nine

flats at required spacings and frame alround, square or round bars with round headed bolts Paise Twenty Four Only

and nuts or by screws (A) Plain Grill.

10 195.00 Applying general insecticide pest control treatment to floors, cupboards etc including labour SqM 91.63 Rupees Ninety One Paise

material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Sixty Three Only

Weight 0.50 percent is recommended one litre chemical emulsion dillute with 39 liter of

water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

11 49.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4245.09 Rupees Four Thousand Estimated

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Two Hundred Fourty Five

Conventional Paise Nine Only

12 76.00 Half brick masonry in common brunt clay building bricks having crushing strength not less SqM 655.64 Rupees Six Hundred Fifty

than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in superstructure Five Paise Sixty Four Only

above floor two level.(B) Conventional

13 195.00 Providing 10mm thick cement plaster in Double coat on RCC Columns, Beams & Ceillings SqM 186.09 Rupees One Hundred

for interior plastering upto floor two level and finished With Double Coat Mala Plaster Eighty Six Paise Nine Only

in(i)Cement mortar 1:3 (1-cement:3-sand)

14 567.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half SqM 231.02 Rupees Two Hundred

brick walls for interior plastering upto floor two level and finished even and smooth in (i) Thirty One Paise Two Only

Cement mortar 1:3 (1-cement:3-sand)

15 361.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level SqM 315.69 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Fifteen Paise Sixty Nine

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

16 762.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

17 762.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture SqM 84.37 Rupees Eighty Four Paise

on undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

18 361.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to SqM 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdere materials.etc complete Only

19 102.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof ( ISI 710) and SqM 2683.57 Rupees Two Thousand Six

fixing 0.8 mm thick decorative lamination sheet 20 mm x 2 mm Plywood frame Hundred Eighty Three Paise

having a size 7 cm x 4 cm using necessary fixtures, fastening, nails, fevicol, ball catch, Fifty Seven Only

magnet and innerside of cupboard oil painting two coats with primer coat etc. complete as

per detailed drawing.

20 12.00 Providing and fixing 3 track Aluminium frame Window with two glass sliding shutters & 1 SqM 4542.15 Rupees Four Thousand Five

mosquito net shutter and fixed window frame size 63.55 mm. x 38.10 mm. having weight Hundred Fourty Two Paise

1.094 Kg./ Mt. shutter frame vertical size 44.45 mmm. x 47.62 mm having weight 1.505 Kg. Fifteen Only

/ Mt. and horizontal size 63.50 x 38.10 mm. having weight 1.608 Kg. / Mt. with 5 mm. thick

plain glass or 12 mm. thick Bison panel with necessary closer, fixtures and fastening rubber

biding clips etc. complete.

21 1.00 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x SqM 1175.56 Rupees One Thousand One

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred Seventy Five Paise

with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Six Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

22 36.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm SqM 3140.09 Rupees Three Thousand Estimated

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Fourty Paise

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Nine Only

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing

23 125.00 Providing & laying both side POLISHED KOTAH STONE SHELVES to C.B. with making SqM 686.67 Rupees Six Hundred Eighty

the grooves in the walls and fixing the kotah stone finishing the same with cement mortar Six Paise Sixty Seven Only

1:2 etc. complete.

24 210.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps SqM 1120.36 Rupees One Thousand One

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Twenty Paise

finishing with flush pointing in white cement. Thirty Six Only

25 147.00 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of SqM 1013.87 Rupees One Thousand

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Thirteen Paise Eighty Seven

sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade Only

of slab including rubbing and polishing etc. complete. (A) 25mm thick

26 19.00 Providing and fixing 35 mm thick SINGLE SHUTTER FLUSH DOOR using Shutters with SqM 5359.06 Rupees Five Thousand

both size Decorative 1 mm thick Laminated, pattern and design is to be approved by the Three Hundred Fifty Nine

Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, & Heavy Paise Six Only

Stainless steel Aldrop as per detailed drawing / as directed.

27 44.00 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in Qntl. 6747.08 Rupees Six Thousand

position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, Seven Hundred Fourty

upto 25 M. span and 15 M ovarall height. Seven Paise Eight Only

28 231.00 Providing and Fixing Roof panel shall be made out of 0.5 mm thick precoated sheet. The Sqm 1643.27 Rupees One Thousand Six

precoated sheet shall be of minimum 240mpa steel grade conforming to IS 14246-1995 and Hundred Fourty Three Paise

shall have zinc coating of minimum 120 gsm as per IS 277-1992, 5-7 microns epoxy primer Twenty Seven Only

on both side of sheet and polyester top 15-18 microns. The PPGI sheet shall have plastic

protective guard film of minimum 25 microns to avoid scratches during transportations. The

sheet should be fixed to the steel member by pop rivets or self drilling / self stiching fastners

@ maximum 450 mm c/c along the length of capping / flashing etc. complete.

29 241.00 Providing and fixing PVC Printed pain colour false ceiling with grid type with alluminium Sqm 773.66 Rupees Seven Hundred

frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used as panel insert in a Seventy Three Paise Sixty

frame work made using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge Six Only

or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame

work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods

of required sizes to maintain proper level etc. The aluminium frame work is supported on

side wall with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles etc.

complete as per direction of Engineer in charge. Manufactures specification and drawing.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

30 30.00 Providing and Arranging Medium Back Cushioned Seat & back, P.P. outer back cover, P.P. No 5494.40 Rupees Five Thousand Four Estimated

arms, Single back lock, Push back mechanism, gas lift for seat height adjustment, five prong Hundred Ninety Four Paise

Nylon base with twin wheel nylon castor including all materials and labour etc. complete as Fourty Only

per instruction of engineer-in-charge. Size : Min. Height 1040mm, Seat : 500mm x 500mm,

Back : 500mm x 440mm.

31 10.00 Providing And Arranging table top 37mm thick made from 18mm thick RA grade plywood No 14831.85 Rupees Fourteen Thousand

with 1mm thick laminate finish. Leg & frame to made from 50mm x 50mm x 1.6mm & Eight Hundred Thirty One

50mm x 25mm x 1.8mm size CRC pipe powder coated 50 micron finish with levelar Paise Eighty Five Only

Appron 18mm thick RA grade plywood with 1mm thick laminate finish with teakwood

border of specified size with Laminate. The balance laminate 0.8mm thick to be provided on

inner faces including all materials and labour etc. complete as per drawing and instruction

of engineer-in-charge. Working Table: Size 1500mm x 900mm x 750mm

32 12.00 Providing and fixing 40mm in widhth wooden partition with both side termite proof, water SqM 5142.92 Rupees Five Thousand One

proof and fire resistant plywood panel laminated with 1mm thick termite proof, water proof Hundred Fourty Two Paise

and fire resistant lamination sheet as approoved complete with using all fixures and Ninety Two Only

hardware fitting as per direction of Engineer in charge.

33 10.00 High Back chair :- Providing High back executive chair,with soft foam PU. No 21033.25 Rupees Twenty One

handle,hotssed bend ply in seat and back,ergonomically design with natural shape of spine Thousand Thirty Three

supporting tire back of the user and provide good plumber support .upholstered with 40 Paise Twenty Five Only

density PU foam in seat and back .Bottom 38 mm dai * 1.63 mm thick CR pipe used in five

prone stand with good quality nicke l chrome of 30 to 35 micron.Synchro - tilt mechanism

made from MS sheet 2.5 , 3.5 ,4 mm thickness duly powder coated 40 to 50 micron. Single

position lock and with gas lift operating system size 675 x 675 x 7165 seat height .440/540

mm and sample approved as directed by the Engineer in charge.

34 17.00 Providing and fixing CUPBOARD with self & shutters using 19 mm thick waterproof SqM 10328.26 Rupees Ten Thousand

plywood ( ISI 710) and fixing minimum 0.8 mm thick decorative lamination sheet (20 Three Hundred Twenty

mm x 2 mm) Plywood frame having a size 7 cm x 4 cm using necessary fixtures, Eight Paise Twenty Six Only

fastening, nails, fevicol, ball catch, magnet and innerside of cupboard oil painting two

coats with primer coat etc. complete as per detailed drawing and laminate will be selected by

engineer in charge.

35 21.00 Providing and fixing 35 mm thick BI-FOLDING FLUSH DOOR using Shutters with both SqM 4068.28 Rupees Four Thousand

size Decorative 1 mm thick Laminated, pattern and design is to be approved by the Sixty Eight Paise Twenty

Architect, with Stainless Steel handle size 30 Cm Long, Tower Bolt size 15cm, & Heavy Eight Only

Stainless steel Aldropetc. Complete. as directed by Engineer-in-charge.

36 30.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 1939.81 Rupees One Thousand Nine

finished with radium sticker including necessary scaffolding for fixing with epoxy material Hundred Thirty Nine Paise

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eighty One Only

consider as a half letter)

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

37 15.00 Providing and fixing sign board made ofstainles steel sheet and fixing on door wall in first No 257.55 Rupees Two Hundred Fifty Estimated

or second alphabet as instructed in radium material including all materials and labour etc. Seven Paise Fifty Five Only

complete as per detail drawing and instruction of engineer-in-charge.

Acrylic Name Board : 12" X 5"

38 12.00 Providing and Fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness and SqM 1768.51 Rupees One Thousand

Top channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of Seven Hundred Sixty Eight

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster Paise Fifty One Only

cord with 4.50mm balls with stop lock arrangement including all necessary fixture, fastners,

fittings, labour, material, machinary etc. complete as seletced and diretced by Engineer-in-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

39 5.00 Providing and fixing Anodized coloured Aluminum composite Panel with 4 mm SqM 2138.17 Rupees Two Thousand One Estimated

thick/Required Glass PVDF coated aluminum foil of approved colour on 50x25 mm Hundred Thirty Eight Paise

aluminum section cleding using tra system as per design with clamping and sealing the Seventeen Only

joints with silicon structural sealant GE-winsil 20 incl. necessary scaffolding etc. complete

for all height.

Amount in Words :

Rupees Fourty Lakh Seventy Six Thousand Five Hundred Eighty Eight Paise Two Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division