PROVN OF CERTAIN B/R AND E/M MAJOR REVENUE/MINOR WORKS ALONGWITH PROVISION OF WEATHER SHELTER AND SPECIAL REPAIRS TO JOINERY AT SECTOR-25 AND SECTOR-27 OF GANDHINAGAR UNDER GE AF CHILODA

Amount

S&F aluminium annodized snap grid (size of grid 605 x 605mm) frame work for false ceiling complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete.

Excavation in trenches not exceeding1.5m wide and not exceeding 1.5m in depth for foundation or for shafts, wells, cesspits, manholes, pier holes, cable laying and similar works etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) in foundation filling , mass concrete including necessary formwork complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete.

M&L for rendering 15 mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth without using extra cement complete.

M&L for providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) in roof kerbs or mud stop, rounded or chamfered on edges including necessary formwork complete all as specified.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

Returning, filling in soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25cm thick complete.

Removing excavated soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .

Excavating in post holes or similar holes in soft/loose soil each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or including butt welded tubes conforming to IS 1161-1979 grade St-240 complete.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to wall, fixed with self tapping screws as specified.

All as per item No 14.00 above but plain sheets complete.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S & F powder coated aluminium frame and shutter for doors, windows, ventilators and partition wall with one or more rebates fixed in position as per manufacturer's instructions including joining cleat, glazing clips, rubber packing, beading etc for fixing complete all as specified and directed by Engineer-In-Charge.

S&F 5.5 mm thick frosted glass fixed to aluminum frame work with rubber beading gasket complete.

S&F 12 mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice laminations fixed with screws to timber/ aluminium frame work .

M&L Framed work such as grills, gratings, angle iron, purlin, wind tie etc. with end of bars shouldered and/or riveted or forged into spikes, framed guard bar , barred iron doors, railings, framed work/caging of water tank and similar works conforming to Fe 290, Gde -E-165 including hanging / locking arrangement as gate ,with hooks and pintle hinges, stops, hand-made sliding bolts including welding and fixing etc all as specified and directed.

S&F 30 mm thick second class hard wood glazed and skeleton shutter, open rebated and prepared to receive gauge, glass etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) .

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete.

S&F aluminium alloy, anodized, sliding door bolt of length 300 mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F aluminium anodised handle fabricated type of size 150mm.

S&F aluminium anodised barrel tower bolt of extruded section of size 150mm.

S&F 300mm mild steel ordinary rat rail/helical spring including roller, roller plate complete.

S&F in repairs rotational moulded water storage tank of 1000 Ltrs capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as in SSR Part-I complete.

S&F stop valves, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed to15 mm bore pipe complete all as specified and directed.

S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.

S&F 15 mm size unions brass to connect iron to polyethylene and fixed complete.

S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 Kg f/cm2 with all fittings and fixed to walls and ceiling or laid in floors complete.

S&F vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and directed.

S&F 32mm bore brass chromium plated waste coupling for wash hand basin all as specified and directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified and directed.

S&F angle stop valve 1 mm bore of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete.

S&F in repairs PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete.

S&F 32mm bore PVC waste pipe for wash hand basin., 600mm long complete all as specified and directed.

S&F 40 mm bore unplasticised PVC pipes of pressure rating 10 Kg f/cm2 with all fittings and fixed to walls and ceiling or laid in floors complete.

S&F 15 mm bore unplasticised PVC pipes of pressure rating 10 Kg f/cm2 with all fittings and fixed to walls and ceiling or laid in floors complete.

S&F PVC bends any radius for 32 mm bore pipe.

S&F solar control film 50 micron thick area exceeding 1.5 sqm reflective type sticked to glass panes as per instructions of manufacturer complete.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete.

M & L for 75mm thick PCC 1:4:8 , type - D2 (using 40mm graded crushed stone aggregate) including necessary form-work as in sub base, finished surfaces fair and even complete.

M&L for 50 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor finished even and smooth using extra cement all as specified and directed.

M&L for sand filling/sand cushioning under floors or in foundations including watering and consolidation complete.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thick and M-35 grade, with grey cement and pigment with rubber mould finish laid in floor etc complete.

M&L for precast cement concrete block masonry with solid blocks of 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) exceeding 10 cm in width and setting in CM 1:6 complete all as specified and directed.

S & F in repairs bib cock with wall flange and aerator ( Make: CERA Cat No F2007151/Hindware/ Parryware/Somany ) all as specfied & directed by Engr-In-Charge.

S & F in repairs pillar cock with aerator ( Make: CERA Cat No F2007101/Hindware/ Parryware/Somany ) all as specfied & directed by Engr-In-Charge.

S&F in repairs coloured vertical vanishing blind having minimum 75mm width of strip complete with all its accessories fixed to wall with screws all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B-2, (using 40mm graded crushed stone aggregate) in foundation ,filling , mass concrete including necessary formwork complete all as specified and directed.

M&L for 2mm thick aluminium sheet with degreasing treatment & fine grinding on front side for proper pasting of Reflective sheet and degreasing treatment & stove enamel paint on back side inclusive of pasting of reflective sheet on full front side(Rotro reflective sheeting high intensity prismatic sheeting Type-III & IV) and fixing of screen printed cutouts e.g. symbols / messages /lettering/borders etc complete including fixing arrangements as required for framing on angle iron post all as specified and directed. Note: Angle iron post/excavation/earthwork shall be measured and paid separately.

S&F SS Steel pipe and embeding in concrete posts all as directed by Engr-In-Charge.

M&L for hardcore broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for 75 mm thick PCC 1:3:6, type C-2 ( using 40 mm graded crushed stone aggregate) as in floor complete.

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor all as specified and directed.

M&L for finishing surface of concrete roads, pavements, by brooming complete.

M&L for formwork to edges of concrete exceeding 10 cm but not exceeding 20 cm wide for fair finished surface of concrete complete.

M&L for forming 12mm thick expansion joints in 100 mm thick slab filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound grade A complete.

M&L for forming contraction (Dummy Joint) 65mm deep and 10mm wide filled with sealing compound grade A all as specified and directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar.

M&L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick(square/ rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete.

M&L for glazed ceramic tiles in vertical surfaces of size 350x250x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in CM 1:4 complete.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F in repair wall hung EWCs with seat cover of size 500x360x350mm including all fixing bolts,seat cover (excluding flushing cistern and flush pipe) complete all as specified trap of ivory in colour complete.

S&F in repairs flushing Cistern with half frame of 10 Ltrs capacity with all fittings excluding Knob complete.

S&F Actuator knob Shine finish for flushing Cistern .

S&F Rag bolts for EWC complete.

S&F CI Chairs for EWC complete.

S&F in repairs Counter type wash hand basin of size 550X405 mm ivory in colour including all fixing bolt & Connections complete .

S&F in repairs waste coupling with ceramic pop-up full thread 32mm for wash hand basin complete.

S&F bottle trap of size 150mm.

S&F Shower partition of size 900x1950 with 6mm glass complete as specified and directed by Engr-in-charge.

S&F wooden drawer for WHB including all fitings as specified and directed by Engr-in-charge.

S & F in repairs pillar cock long neck with aerator of 15 mm bore size complete as specified and directed by Engr-in-charge.

S&F in repairs soap dish holder, any type, fixed to plugs with chromium plated brass screws complete as specified and directed by Engr-in-charge.

S&F in repairs angle cock, any type, fixed to plugs with chromium plated brass screws complete as specified and directed by Engr-in-charge.

S&F in repairs health faucet (ABS Body) with 1 Meter long easy flexible stainless steel tube in chrome finish & wall hook complete as specified and directed by Engr-in-charge.

S&F in repairs bib cock with wall flange and aerator as specified and directed by Engr-in-charge.

S&F wall mixer with bend pipe for overhead shower including all fittings as specified and directed by Engr-in-charge.

S&F basin mixer with 450 mm braided connection pipe as specified and directed by Engr-in-charge.

S&F overhead rain shower square 180x180mm of size including all fixing bolt complete as specified and directed by Engr-in-charge.

S&F in repairs stainless steel towel rail of 600mm in size including all fixing bolts as specified and directed by Engr-in-charge.

S&F stainless steel towel rack of 600mm in size with lower hanger complete as specified and directed by Engr-in-charge.

S&F in repairs toilet paper holder as specified and directed by Engr-in-charge.

S&F Mirror of size 600x300 mm of 5mm thick complete as specified and directed by Engr-in-charge.

Taking up or down steel tubing pipe and connections 15mm bore.

M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) size exceeding 1.5 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour square tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F in repair door closer, hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

M&L for PVC Floor trap with grating including jointing with solvent cement complete.

M&L for PVC multi Floor trap with grating including jointing with solvent cement complete.

S&F aluminium powder coated ventilator with necessary beading including locking arrangement complete all as directed by Engr in charge Note:- Glass /Particle Board shall be measured and paid separately.

S & F 4mm thick frosted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed.

M&L for vitrified ceramic coloured tiles 10mm thick light shade square in floors area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm set in neat cement slurry, jointed and pointed with white/coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete.

All as per item No 99.00 above, but in vertical surfaces like riser of steps/ skirting/ dado/ pillar etc. over and including 10mm thick backing coat in CM 1:4 complete.

Taking down shutters of any description not exceeding 1.00 Sqm each.

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc. complete.

M&L for rendering 15 mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth without using extra cement complete.

M&L for machine cut kota stone slab as in flooring of 20-25mm thickness over screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass exceeding 0.5 sq.m in each pane complete.

S&F prelaminated particle board 12 mm thick ,exterior grade, prelaminated with one side decorative choice lamination and other side balancing white fixed with screws to aluminium frame work/ timber work complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whitening complete.

S&F 110 mm bore pipe (SWR) single socket in any length with rubber ring joints fixed in walls complete.

S&F small article bands, strap, supports or stays for rain water, ventilation pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples chain hand made sliding bolts clamps hand made sliding bolts clamps hand made sliding bolts clamps hold fasts wall ties hooks for hanging fire hydrant cylinders using steel section and similar small articles conforming to Fe-290, Gde- E-165 complete.

Taking down carefully copper/ aluminum point wiring (light, fan, socket, power and bell) including unscrewing from board out let boxes fitting and fixtures such as switches, sockets, ceiling roses, lamp, holder brackets, ceiling fittings bulk head fitting tube light fitting and regulators etc., complete all as specified and directed.

Taking down light fittings of any description complete.

M & L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 volt grade confirming to IS 694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 25 mm dia (external) but shall be increased as per actual site requirement with clause No. 19.25 of SSR art I ) ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixedconcealed/recessed in wall or ceiling etc. including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed of suitable size with bakelite white/coloured top sheet cover 3.0 mm thick for :-

One light point controlled by a one - way 5 Amp switch.

One 3 pin socket out let 5 Amps on the independent board.

All as per item no 112.00 above but with cable of size 2.5 Sq mm PVC including 2.5 Sqmm single PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100V grade as earth continuity wire insulated on independent board for power plug 15 Amps.

S&F modular switch 01way, 06 Amps, 01 module complete.

S&F modular switch 01way, 16 Amps, 01 module complete.

S&F socket modular type, 2/3 pin, combined 02 module, 06 Amps complete.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module.

S&F Modular metal flush box and white cover plate with frame suitable for 3 module, ISI marked complete all as specified and as directed.

S&F Ultra bright LED (Double side connection) polycarbonate Tubelight with <10% THD with very high efficiency suited for installation in existing tubelight with G13 lamp holders to give glare free light of capacity 20 Watt 230 Volts complete. Make:- Cat no. LHLDDBXEULZ7020 of Havells/Philips/GE/Bajaj/Syska/ Orient

S&F exhaust fans AC single phase 230 V, 50 Hz of size 225 mm sweep with louvers and shutters and connecting up including provision of cable three core flexible cord of 230 volt grade of size 0.23/0.076 from ceiling rose to connector fan also making suitable size hole on wall with plaster complete. Make: HAVELLS/ CG/ ALMONARD/ PHILIPS/ Bajaj/ Orient/ Khaitan

S&F ceiling rose 3 phase terminal PVC polycarbonate, isolated body complete.

S&F switch piano, single pole one way 6 Amps 240 volt capacity flush type all as specified.

Supply onlyPluto flat panel (surface) ultra modern compact surface mounted 36W LED 6000K (2' x 2') luminaire in MS housing with opal diffuser & complete with electronic driver & high brightness SMD LEDs including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed. Make:- Cat No LHEWE1P71W1034 of Havells/Philips/GE/ BAJAJ/ HPL

Supply 5 Watt LED decorative recess mounted spot light for low height ceiling complete.

S&F GI pipe medium grade 15 mm dia for making connection to Desert coolers laid on wall/floor/roof complete with fixing arrangements like shaddles and screw fixed at 300mm gape all as specified and directed.

M & L for Mild Steel, Angle iron, Fe-410-W (Gde- E-250) quality-B , made to shape for stands of desetr cooler of required size as directed at site of Equal angle size 25x25x4 mm thick, including welding and painting complete all as directed. (weight @ 1.4 Kg/Mtr)

S&F PVC connection pipe 15 mm size with PTMT nuts of length 900 mm complete.

S&F 15 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.

S&F exhaust fans AC single phase 230/ 240 V of size 380 mm sweep complete with louver shutter. Note :- (a) Making hole in existing brick wall of required size to accommodate exhaust fan and fixing louvers on outer surface of the wall shall be deemed to be inclusive in the quoted rate by the contractor. (b) Making good to the existing surface of the wall with matching colour of white wash or distemper is included in the scope of work.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC casing & caping including accessories like bends, tees, junction boxes etc fixed on wall or ceiling etc including 1.5 Sqmm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite or hymal white/colored top sheet cover 3.0mm thick for:

(a) One Exhaust fan/ ceiling fan point controlled by one 5 Amps switch.

(a) One light point controlled by one 5 Amps switch.

All as per item no 132.00 above but with cable of size 2.5 Sq mm PVC including 2.5 Sqmm single PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100V grade as earth continuity wire insulated on independent board for power plug 15 Amps.

Supply and laying dry Sand cushioning to underground cable with screened, washed river sand, including punning gently all as specified and directed. Note: - Thickness after punning will be measured for payment.

Supply and laying for burnt brick old size sub class 'B' laid in trenches a butting each other with a gap not exceeding 10 mm , vertically over the cable for cable protection complete all as specified and as directed.

Labour only for boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 50 mm dia cable protection all as specified and directed by Engineer In Charge.

Supply and laying 40 mm bore GI tube light grade in trenches in road cross / floors with all fittings for protection of cable of following dia/bore of pipe.

Supply and laying LT XLPE insulated (ISI Marked), armoured heavy duty electric cable with aluminium conductor, 1100 volts grade 10 sqmm 2 core in trench/duct/on pole/wall etc. complete all as specified and directed. Note:- Excavation/earth work, sand cushioning/brick protection shall be measured and paid separately.

S&F Switch socket combined universal 2 in 1, 6 pin, 5 and 15 Amps flush type.

S&F ceiling fan regulator resistence type.

S&F MCB SPN of rating 32 Amp, 240 Volt, 10 KA, 'C' series

S&F MCB SP of rating 6-32 A, C curve, 240 Volt.

S&F sheet metal enclosure with hylem sheet 6 way with sunken type pressed steel terminal boxes of size 3mm thick bakelite steel white/coloured top cover

S&F 4 feet 18W/20 Watt LED tube light alongwith aluminium batten with a nominal system lumen output of minimum 2000/2100 lumens and a minimum system effficiency of >100 lumens/Watt. The tube shall have a rated system life time of 40,000 burning hours at L70. The tube should have a temperature of 6500K and CRI > 83. The tube shall meet IP20 rating with THD < 10% and PF < 0.95. The tube should have minimum inbuilt surge protection of 2KV. The total power consumption should not exceed 20W (including driver) complete. Make : Philips MAS LED tube 1200mm 18W865" / Wipro/ Havells/ CG/ Orient/GE/Bajaj.

S&F Ceiling fan 1200 mm sweep , single phase , 230 Volt, 50 Hz & connecting up including provision of cable from ceiling rose to connector fan. Make: HAVELLS/ CG/ ALMONARD/ PHILIPS/ Bajaj/ Orient/ Khaitan

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5 m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt necessary excavation in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm dia GI light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1, RCC 1:2:4 type B-1 pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia complete connected to earth test point including testing complete all as specified and directed.

Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hz capacity 405/425 Litre with double door complete. Note: The refrigerator shall have 1 year comprehensive warranty and 2 years additional warranty on compressor. Make:- LG/ Voltas/ Blue Star/ Whirlpool/ Samsung

S&F Switch socket combined universal 3 pin, 5 and 15 Amps multi- purpose with PVC box for fixing of socket open type.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage 80 Ltrs and nominal cooling capacity 40 Ltrs complete all as specified and directed. Make : Voltas/Blue Star or equivelant Note :- (a) Cost of push type Bib cock (cast copper alloy), Steel waste water tray, PVC water waste pipe and float valve shall be deemed to be inclusive in the quoted rate by the contractor.

S & F package reverse osmisis system capacity 50 Ltrs per hours, stainless steel body, skid mounted with softner, pressure gauge, UV sterilisation with bracket, sediment filter, including 0.25 HP monoblock pump, single phase, with sensor complete all as directed. Make : Ro Care India(Model 50 lph open)/ Eureka forbes/ thermax /KENT or any other make approved by E-in-C at the time of acceptance of tender.

Material and labour for point wiring complete with 2.5 sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC casing & caping including accessories like bends, tees, junction boxes etc fixed on wall or ceiling etc including 2.5 Sqmm FRLS PVC insulated unsheathed copper earth wire(green colour) to common earth dolly including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white/colored top sheet cover 3.0mm thick compete all as specified and as directed for :- (a) One 3 pin 6 Amps switch socket out on indipendent board.

S & F socket outlet 2 in 1 multipurpose, 5 pin 5 or 6 Amps.

M & L for maintenance free pipe earthing with the following specification (i) 3 Meter long inner main electrod ETP grade copper with 99.99% purity of 38 mm OD and 3.2 mm thick. (ii) 3 meter long outer electrod made of ETP grade copper with 99.99% purity of 80 mm OD and 3.2 mm thick. (iii) The space between the electrod ai field with highly conductive and corrosion resistance compound (CCM) conssisting of heighly conductive metal alloy, cu or alu powder, conductive carbon/cement element and bounding material mixed in different proposition with resistivity less than 0.2 Ohm-meter. The mixture should be pressure field inside earth electrod in paste form & ecoforms welded. (iv) The whole assemble of pipe-in-pipe earthing electrod is to be inserted in to a bore made of approperiate size in the earth and space arround is field by scientificly developed RoHS complaint bake fill compound (BFC) as per clause 14.5 of IEEE 80:2000 & part 7 of IEC 62561. The BFC compound should be hygroscopic, non-soluyble & should not contain bentonite in any case. The minimum weight of BFC per pit should be 75 KG. Necessary NABL test certificate indication PH value, resistivity, mousture retaining capacity & water solubility should be produced by the contractor. (v) The top connection plate of 50 mm *25 mm ETP grade CU, bar scientifically designed.

M & L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 03 nos 8mm dia 25 mm long hexagonal head screw complete all as specified and directed.

M&L for copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete.

Supply ,intsall and testing for borewell pump and motor vertical type Confirming to IS- 12469:1988 with non over loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 144 m head 800 LPM discharge suitable for borewell of 250 mm casing multistage type complete as directed by EIC.

S&F dol starter for suitable for 45 HP motor with relay range settings of 35-65 Amp with connection to borewell motor of 120 meters depth complete as directed by EIC

S&F copper submersible flat cable 3 phase of 25 sqmm with submersible joints to connect with the existing cable complete as directed by EIC.

1-Supply,install,testing & commissioning of reciprocating dosing pump,high pressure,single head ,gear motored adjustable dosing pump having output 2 US GPD to 40 US GPD and adjustable to high pressure of upto 100 PSI with accessories including lead tubing, connection, nuts, injection check valve, clay weight and ferrules and 100 litres FRP tank with lid & level gauge along with Agitator and shaft & blade in plastic mounted on tank. The agitator motor must posses following specifications: Voltage input 230V,single Phase,50 Hz,900 Rpm of suitable capacity The accessories in the dosing system must consist of folowing: a) Preparation tank i)Water inlet line ii)Outlet with strainer iii)Drain iv)Overflow v)Conical bottom for sludge disposal vi)Port whole with cover vii)Level Gauge viii)Agitator:120 watts,900 Rpm single phase flange mounted motor with plastic shaft and impleller

II) Service tank Model no VST 1006 (FRP), capacity 100 ltr,dia 480mm, net height 575mm consist of:-) Water inlet line b) Dosing pump mounting provision on lid/wall c) Drain d) Overflow e) Level Guage f) Inspection port. Make-Aquafit,Declibak or equivalent

3. Supply and fix switch socket outlet mutipurpose 2 in 1,5 pin 6 Amps,240 Volts (ISI marked) flush type complete all as specied and directd

2.Point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through and including suitable size of PVC casing caping accordance with clause 19.125 of ssr part (1) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends,tees,junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm PVC insulated but unsheathed multi stranded copper conductor FRLS cable as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3 mm thick bakelite sheet white/coloured top cover for one 3 pin 15 or 16 Amps socket outlet on independent board complete all as specified as directed by Engr-in-charge.

Supply and fix desert cooler electric driven (single phase), withhaving nominal air flow capacity of 5000 CuM per hour (or nearest size) with Plug top 5 Amps and complete with following:- Body : GI sheet Tank capacity : 90 Ltrs Fan Motor : Clock wise rotation, 2900 RPM Fan Blade : Three blade of metal. Front Grill : Adjustable in four steps. Fan Regulator : Adjustable in 3 Speeds. Rear & Sides : Grass padding with thread mesh, detachable type. Water Pump : Submersible type PVC body. Electric Controls : ON-Off switch with indicator.

M & L GI pipe medium grade 20 mm dia for making connection from existing 25 mm dia GI pipe complete all as specified.

S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of dia 15 mm.

ALPINE CONSTRUCTIONS

GIRNAR CONSTRUCTION

Ramdev and Sons

Sharnamsingh and Co

Navkar Enterprises

Shree Builders